5" 800x480 TFT IPS LCD Module with Projected Capacitive Touch
Model No. WF50FSYBGDSGA
►Size: 5 inch
►Resolution : 800×480 dots
►View Direction : IPS
►Interface : SPI/QSPI
►Driver IC:BT815Q
►Control-Board : Yes
►Brightness(cd/m²) : 750
►Frame Through Hole : Yes
►Touch Panel : Projected Capacitive Touch Screen
►Detect Point : 5 Fingers
►Operating Temperature : -20~+70°C
Description
WF50FSYBGDSGA is a 5-inch High Brightness IPS TFT-LCD display with a Capacitive Touch screen (PCAP) resolution of 800x480 pixels. This module is built-in with BT815 controller IC, and it supports SPI and QSPI interfaces. The QSPI interface can achieve four times data rate compared with the current SPI interface and make a smoother display accordingly. The series of BT815/6 controller IC with EVE (Embedded Video Engine) technology simplifies the system architecture, Eve technology is a revolutionary concept that utilizes an object-oriented approach to creating high-quality human-machine interfaces (HMI). This new technology supports display, audio and touch, enabling engineers to quickly and efficiently design HMI and provide a powerful solution for high-resolution displays that reduce material costs.
WF50FSYBGDSGA is adopted IPS panel which is having the advantage of wider view angle of Left:80 / Right:80 / Up:80 / Down:80 degree (typical), contrast ratio 800:1 (typical value), brightness 750 nits (typical value), glare surface panel, aspect ratio 5:3. The PCAP touch screen is built-in with ILI2130 IC, supporting I2C interface and multi-touch function. The WF50F SPI series also has a resistive touch panel (RTP) option. For more detailed information, please check the webpage of WF50FSYBGDST0.
The control signal for WF50FSYBGDSGA is 3.3V; it has a built-in storage device (FLASH 32M); without MicroSD Socket. If customers require the control signal to be 5V for the Arduino board, don't hesitate to contact us. WF50F model can be operating at temperatures from -20℃ to+ 70℃ and storage temperatures from -30℃ to +80℃.
DRAWING
SPECIFICATIONS
Interface
LCM PIN Definition (CON5)
Pin | Symbol | I/O | Function |
---|---|---|---|
1 | VDD | P | 3.3V power supply input |
2 | GND | P | Ground |
3 | SCK | I | SPI clock input |
4 | MISO | O | SPI Single mode: SPI MISO output SPI Dual/Quad mode: SPI data line 1 |
5 | MOSI | I | SPI Single mode: SPI MOSI input SPI Dual/Quad mode: SPI data line 0 |
6 | CS | I | SPI slave select input |
7 | INT | OD/O | Interrupt to host, open drain output(default) or push-pull output, active low |
8 | PD_N | I | Chip power down mode control input, active low. Connect to MCU GPIO for power management or hardware reset function |
9 | GPIO2 | I/O | General purpose IO 2 |
10 | GPIO3 | I/O | General purpose IO 3 |
11 | IO2 | I/O | SPI Single/Dual mode: General purpose IO 0 SPI Quad mode: SPI data line 2 |
12 | IO3 | I/O | SPI Single/Dual mode: General purpose IO 1 SPI Quad mode: SPI data line 3 |
13 | CSCL | I | Connect to I2C SCL pin of the CTP(ILI2130) |
14 | CSDA | I/O | Connect to I2C SDA pin of the CTP(ILI2130) |
15 | CRST | I | Connect to reset pin of the CTP(ILI2130) |
16 | CINT | O | Connect to interrupt pin of the CTP(ILI2130) |
17 | VLED | P | 5V power supply input |
18 | VLED | P | 5V power supply input |
19 | GND | P | Ground |
20 | GND | P | Ground |
General Specifications
Item | Dimension | Unit |
---|---|---|
Size | 5 | inch |
Dot Matrix | 800× 3(RGB) × 480 | dots |
Module dimension | 138.7 (W) x 75.8 (H) x 13.0(D)(MAX) | mm |
Active area | 108(W) ×64.8 (H) | mm |
Pixel pitch | 0.135(W) ×0.135(H) | mm |
LCD type | TFT, Normally Black, Transmissive | |
Viewing Angle | 80/80/80/80 | |
Aspect Ratio | 5:3 | |
Backlight Type | LED, Normally White | |
TFT Controller IC | BT815Q | |
TFT Interface | SPI/QSPI | |
PCAP FW Version | 0x07.0x00.0x00.0x00.0xA1.0x25.0x50.0x00 | |
PCAP IC | ILI2130 or equivalent | |
PCAP Interface | I2C | |
PCAP Resolution | 16384*16384 | |
Touch Panel | With PCAP | |
Surface | Glare |
Absolute Maximum Ratings
Item | Symbol | Min | Typ | Max | Unit |
---|---|---|---|---|---|
Operating Temperature | TOP | -20 | - | +70 | ℃ |
Storage Temperature | TST | -30 | - | +80 | ℃ |
Electrical Characteristics
Item | Symbol | Condition | Min | Typ | Max | Unit |
---|---|---|---|---|---|---|
Supply Voltage For VDD | VDD | - | 3.1 | 3.3 | 3.5 | V |
Supply Current For VDD | IDD | VDD=3.3V | - | 147 | 220 | mA |
Supply Voltage For VLED | VLED | - | 4.5 | 5 | 5.5 | V |
Supply Current For VLED | ILED | VLED=+5V | - | 334 | 500 | mA |
Search keyword: tft 5", 5 tft lcd, 5" tft lcd, 5 inch tft lcd, tft lcd 5, 5 tft display, 5" tft display, 5 inch tft display, tft display 5"