1.04" 128x32 Moduły OLED (COG+PCB)
Numer modelu WEA012832E
►Typ: graficzny
►Struktura: COG+PCB
►Rozmiar: 1.04"
►128x32 matryca punktowa
►IC:SSD1306
►zasilanie 3V
►wypełnienie 1/32
►Interfejs: SPI
►Kolor wyświetlacza: biały / żółto
►Traditional Chinese / Simplified Chinese version options
Rysunek
Data source ref: WEA012832EWPP3N00000
Specyfikacja
Funkcja pinów interfejsu
No. | Symbol | Funkcja |
---|---|---|
1 | SDI | Serial data input This pin connects font IC of SDI and OLED drive IC of SDI. |
2 | SCL | Serial clock input This pin connects font IC of SCL and OLED drive IC of SCL. |
3 | DC | This is Data/Command control pin. |
4 | RES | This pin is reset signal input. When the pin is pulled LOW, initialization of the chip is executed. |
5 | CS | This pin is the chip select input. (active LOW). |
6 | VIN | Input voltage for 2.8 ~ 5.2V power supply. |
7 | GND | This is a ground pin. |
8 | SDO | Serial Data Output for font IC. Data is shifted out on the falling edge of the serial clock. |
9 | CS_G | Chip Select input for font IC. This pin is the chip select input. (active LOW). |
10 | NC | Not connection |
Dane mechaniczne
Rzecz | Wymiar | Jednostka |
---|---|---|
Matryca punktowa | 128 x 32 | punktów |
Wymiary modułu | 35.4 × 23.5 × 1.8 | mm |
Obszar aktywny | 25.58 × 6.38 | mm |
Wielkość piksela | 0.176 × 0.176 | mm |
Raster pomiędzy pikselami | 0.200 × 0.200 | mm |
Tryb wyświetlania | matryca | |
Kolor wyświetlacza | Monochromatyczny | |
Drive Duty | 1/32Duty | |
IC | SSD1306 | |
Font IC | GT21L16T1W (Traditional Chinese) / GT21L16S2W (Simplified Chinese) | |
Interfejs | SPI | |
Rozmiar | 1.04 cale |
Bezwzględne oceny maksymalne
Parameter | Symbol | Minimalna wartość | Maksymalna wartość | Jednostka |
---|---|---|---|---|
Supply Voltage for input | VIN | 2 | 7 | V |
Operating Temperature | TOP | -40 | +80 | °C |
Storage Temperature | TSTG | -40 | +85 | °C |
Parametry elektryczne
Rzecz | Symbol | Stan | Minimalna wartość | Typowa wartość | Maksymalna wartość | Jednostka |
---|---|---|---|---|---|---|
Supply Voltage for Input | VIN | - | 2.8 | 3.0 | 5.2 | V |
Input High Volt. | VIH | - | 2.4 | - | 3.2 | V |
Input Low Volt. | VIL | - | 0 | - | 0.6 | V |
Output High Volt. | VOH | - | 2.7 | - | 3.2 | V |
Output Low Volt. | VOL | - | 0 | - | 0.3 | V |
50% Check Board operating Current | IIN | VIN=3V | - | 13.0 | 26.0 | mA |