1.54 pouces Modules Afficheurs OLED 128x64 Graphiques
N° de modèle WEA012864AA
►Type: Graphique
►Structure: COG+PCB
►Dimension: 1.54 pouces
►Matrice de points 128 x 64
►IC:SSD1327
►Alimentation 3V
►1/64 duty
►Interface: 4-wire SPI
►Couleur d'affichage: Blanc / Jaune
►Support Grayscale
Description
WEA012864AA est un écran OLED diagonal de 1,54 pouce avec une résolution de 128x64 pixels. Le module est équipé du circuit intégré SSD1327, prenant en charge les interfaces SPI à 4 fils et éventuellement les interfaces I2C avec un rapport de service de 1/64. La tension d'alimentation pour la logique est comprise entre 3,3V et 5V. Ce module OLED peut afficher 4 niveaux de gris et convient aux dispositifs électroniques, aux applications médicales, aux compteurs automobiles, etc. Le WEA012864AA peut fonctionner dans des plages de températures allant de -40°C à +80°C ; ses températures de stockage vont de -40°C à +85°C.
DESSIN
![1.54 inch Graphic OLED Display 128x64 Modules - WEA012864AA](/uploads/editor/images/oled-module/graphic-oled-display/WEA012864AA.jpg)
Data source ref: WEA012864AAWAP3N00000
SPÉCIFICATIONS
Fonction PIN sur l'interface
No. | Symbole | Function |
---|---|---|
1 | GND | This is a ground pin. |
2 | VCC | Power supply for panel driving voltage. This is also the most positive power voltage supply pin. It is supplied by external high voltage source. |
3 | D0 | These pins are bi-directional data bus connecting to the MCU data bus. Unused pins are recommended to tie LOW. When serial interface mode is selected, D0 will be the serial clock input: SCLK; D1 will be the serial data input: SDIN and D2 should be kept NC. |
4 | D1 | |
5 | RES# | This pin is reset signal input. When the pin is pulled LOW, initialization of the chip is executed. Keep this pin pull HIGH during normal operation. |
6 | D/C# | This pin is Data/Command control pin connecting to the MCU. When the pin is pulled HIGH, the data at D[7:0] will be interpreted as data. When the pin is pulled LOW, the data at D[7:0] will be transferred to a command register. |
7 | CS# | This pin is the chip select input connecting to the MCU. The chip is enabled for MCU communication only when CS# is pulled LOW (active LOW). |
Données mécaniques
Article | Dimensions | Unité |
---|---|---|
Matrice de points | 128 × 64 | - |
Dimensions du module | 42.4 x 38.0 x 5.96(MAX) | mm |
Zone active(AA) | 35.05 × 17.51 | mm |
Pixel Size | 0.249 × 0.249 | mm |
Pixel Pitch | 0.274 × 0.274 | mm |
Mode d'affichage | Matrice passive | |
Couleur d'affichage | Monochrome | |
Drive Duty | 1/64 Duty | |
Gray Scale | 4 bits | |
IC | SSD1327 | |
Interface | 4-wire SPI | |
Diagonale | 1.54 pouces |
Valeurs nominales maximales absolues
Parameter | Symbole | Min | Max | Unité |
---|---|---|---|---|
Supply Voltage for Logic | VCC | 2.0 | 5.5 | V |
Operating Temperature | TOP | -40 | +80 | °C |
Storage Temperature | TSTG | -40 | +85 | °C |
Caractéristiques électroniques
DC Caractéristiques électroniques
Article | Symbole | État | Min | Typ | Max | Unité |
---|---|---|---|---|---|---|
Supply Voltage for Logic(3V/5V) | VCC | - | 2.8 | 3.3 | 5.2 | V |
Input High Volt. | VIH | - | 0.8×VCC | - | VCC | V |
Input Low Volt. | VIL | - | VSS | - | 0.2×VCC | V |
Output High Volt. | VOH | - | 0.9×VCC | - | VCC | V |
Output Low Volt. | VOL | - | 0 | - | 0.1×VCC | V |
Display 50% Pixel on | ICC | VCC =3.0V | - | 60 | 120 | mA |