Startseite Produkte OLED-Anzeige Grafik-OLED-Anzeigen WEA012864AA

1.54" OLED-Modul, 128x64

Modellnummer WEA012864AA

►Typ: Grafik
►Bauweise: COG+PCB
►Größe: 1,54 Zoll OLED
►128 x 64 Punktmatrix
►IC:SSD1327
►3-V-Stromversorgung
►1/64 duty
►Schnittstelle: 4-wire SPI
►die Farbe des Displays: Weiß / Gelb
►Unterstützt Grauskala

Zeichnung

1.54 inch Graphic OLED Display 128x64 Modules - WEA012864AA

Data source ref: WEA012864AAWAP3N00000

Technische Daten

Schnittstelle Pin-Funktion

No. Symbol Beschreibung
1 GND This is a ground pin.
2 VCC Power supply for panel driving voltage. This is also the most positive power voltage supply pin. It is supplied by external high voltage source.
3 D0 These pins are bi-directional data bus connecting to the MCU data bus.
Unused pins are recommended to tie LOW. When serial interface mode is selected, D0 will be the serial clock input: SCLK; D1 will be the serial data input: SDIN and D2 should be kept NC.
4 D1
5 RES# This pin is reset signal input.
When the pin is pulled LOW, initialization of the chip is executed. Keep this pin pull HIGH during normal operation.
6 D/C# This pin is Data/Command control pin connecting to the MCU.
When the pin is pulled HIGH, the data at D[7:0] will be interpreted as data.
When the pin is pulled LOW, the data at D[7:0] will be transferred to a command register.
7 CS# This pin is the chip select input connecting to the MCU.
The chip is enabled for MCU communication only when CS# is pulled LOW (active LOW).

mechanische Daten

Artikel Ausmaß Einheit
Punktmatrix 128 × 64 -
Module dimension 42.4 x 38.0 x 5.96(MAX) mm
Aktiver Bereich 35.05 × 17.51 mm
Punktgröße 0.249 × 0.249 mm
Punktabstand 0.274 × 0.274 mm
Display Mode Passive Matrix
Display Color Monochrome
Drive Duty 1/64 Duty
Gray Scale 4 bits
IC SSD1327
Schnittstelle 4-wire SPI
Größe (Diagonale) 1.54 Zoll

Absolute Grenzwerte

Parameter Symbol Mindestwert Maximalwert Einheit
Supply Voltage for Logic VCC 2.0 5.5 V
Operating Temperature TOP -40 +80 °C
Storage Temperature TSTG -40 +85 °C

elektronische Eingenschaften

DC elektronische Eingenschaften

Artikel Symbol Bedingung Mindestwert typischer Wert Maximalwert Einheit
Supply Voltage for Logic(3V/5V) VCC 2.8 3.3 5.2 V
Input High Volt. VIH 0.8×VCC - VCC V
Input Low Volt. VIL VSS - 0.2×VCC V
Output High Volt. VOH 0.9×VCC - VCC V
Output Low Volt. VOL 0 - 0.1×VCC V
Display 50% Pixel on ICC VCC =3.0V - 60 120 mA
go top
close