10.1" 1024x600 LVDS IPS PCAP TFT Display de Legibilidad Bajo Luz Solar
Modelo Nº WF101JSYAHLNB0
►Tamaño : 10.1 pulgada
►Resolución : 1024×600 pontos
►Dirección de la vista : IPS
►Interfaz : LVDS
►Controlador IC : EK79001HN + EK73215BCGA
►Placa de control : No
►Brillo (cd/m2) : 900
►Agujero del bastidor : No
►Pantalla táctil : panel táctil capacitivo (PCAP)
►Detect Point : 5 Fingers
DIBUJO
ESPECIFICACIONES
Función interfaz Pin
Pin No. | Símbolo | Función |
---|---|---|
1 | VCOM | Common voltage |
2 | VDD | Digital power |
3 | VDD | Digital power |
4 | NC | Not connect |
5 | Reset | Global reset pin. Active low to enter reset state. Suggest to connecting with an RC reset circuit for stability. Normally pull high. (R=10KΩ,C=1μF) |
6 | STBYB | Standby mode, normally pull high STBYB=”1”, normal operation STBYB=”0”,timing control, source driver will turn off, all output are high-Z |
7 | GND | Digital ground |
8 | RXIN0- | Negative LVDS differential data inputs |
9 | RXIN0+ | Positive LVDS differential data inputs |
10 | GND | Digital ground |
11 | RXIN1- | Negative LVDS differential data inputs |
12 | RXIN1+ | Positive LVDS differential data inputs |
13 | GND | Digital ground |
14 | RXIN2- | Negative LVDS differential data inputs |
15 | RXIN2+ | Positive LVDS differential data inputs |
16 | GND | Digital ground |
17 | RXCLKN- | Negative LVDS differential clock inputs |
18 | RXCLKN+ | Positive LVDS differential clock inputs |
19 | GND | Digital ground |
20 | RXIN3- | Negative LVDS differential data inputs |
21 | RXIN3+ | Positive LVDS differential data inputs |
22 | GND | Digital ground |
23 | NC | Not connect |
24 | NC | Not connect |
25 | GND | Digital ground |
26 | NC | Not connect |
27 | NC | Not connect |
28 | SELB | 6-bit/8-bit input select SELB = L , 8-bit ; SELB = H , 6-bit |
29 | AVDD | Analog power |
30 | GND | Digital ground |
31 | LED- | LED Cathode |
32 | LED- | LED Cathode |
33 | L/R | Left or right display control |
34 | U/D | Up / down display control |
35 | VGL | Negative power for TFT |
36 | NC | Not connect |
37 | NC | Not connect |
38 | VGH | Positive power for TFT |
39 | LED+ | LED Anode |
40 | LED+ | LED Anode |
When L/R=”1”,set left to right scan direction.
When U/D=”0”,set top to bottom scan direction.
When U/D=”1”,set bottom to top scan direction.
PCAP PIN Definition
Pin | Símbolo | Función |
---|---|---|
1 | USB_VSS | System ground |
2 | USB_VDD 5V | Power supply |
3 | USB_D+ | Data + |
4 | USB_D- | Data - |
5 | VSS | System ground |
6 | SDA | I2C data input and output |
7 | SCL | I2C clock input |
8 | RST | External Reset, Low is active |
9 | INT | External interrupt to the host |
10 | VDDT 3.3 | Power supply |
Especificaciones generales
Elemento | Dimensión | Unidad |
---|---|---|
Tamaño | 10.1 | pulgada |
Matriz de puntos | 1024 RGB x 600 | dots |
Dimensión del módulo | 235(W) x 143(H) x 8.78(D) | mm |
zona activa | 222.72 (H) x 125.28(V) | mm |
Distancia entre puntos | 0.2175(W) x 0.2088(H) | mm |
Tipo de LCD | TFT, Negro, Transmisivo | |
Interfaz | LVDS | |
Controlador IC | EK79001HN + EK73215BCGA o equivalente | |
Dirección de la vista | 85/85/85/85 | |
Relación de aspecto | 16:9 | |
Tipo de retroiluminación | LED, Blanco | |
PCAP IC | ILI2511 or equivalent | |
PCAP Interfaz | USB (I2C available) | |
PCAP FW Versión | V6.0.0.0.62.90.1.2 | |
Con o sin panel táctil | PCAP | |
Superficie | Glare |
Valores nominales máximos absolutos
Elemento | Símbolo | Valor mín. | Valor típico | Valor máx. | Unidad |
---|---|---|---|---|---|
Temperatura de funcionamiento | TOP | -20 | - | +70 | ℃ |
Temperatura de almacenamiento | TST | -30 | - | +80 | ℃ |
Características electrónicas
Typical Operation Conditions (At Ta = 25 °C,)
Elemento | Símbolo | Valor mín. | Valor típico | Valor máx. | Unidad |
---|---|---|---|---|---|
Digital Power Supply Voltage For LCD | VDD | 3 | 3.3 | 3.6 | V |
Analog Power Supply Voltage | AVDD | 9.89 | 10.2 | 10.5 | V |
Gate On Power Supply Voltage | VGH | 19.4 | 20.0 | 20.6 | V |
Gate Off Power Supply Voltage | VGL | -10.3 | -10.0 | -9.7 | V |
Common Power Supply Voltage | VCOM | 4.0 | 4.3 | 4.6 | V |
Input logic high voltage | VIH | 0.7 VDD | - | VDD | V |
Input logic low voltage | VIL | 0 | - | 0.3 VDD | V |
Supply PCAP | USB_VDD 5V | 4.4 | 5.0 | 5.5 | V |
I VDD 5V | — | 97.8 | 120 | mA |