產品敘述
WF101JSYAHLNB0是一款10.1吋高亮度投射電容式觸控面板(PCAP) IPS TFT LCD模組，解析度為 1024x600 像素。 WF101JSYAHLNB0模組內建EK79001HN和EK73215BCGA 驅動IC，支援LVDS介面。模組對比度800:1(典型值)、亮度900 nits (典型值)、長寬比16:9、採用防眩光玻璃表面、為全透TFT。這款10.1吋IPS TFT視角比TN TFT更寬，視角為左: 85/右: 85/上: 85/下: 85度 (典型值)。此款電容式觸控面板上內建ILI2511 IC 支援USB介面也可用於I2C介面，支援5指觸控功能可與Windows，Linux，Android和Mac操作系統相容。想了解更多使用ILI2511 IC的USB/I2C介面電容式觸控面板的說明請連結至技術介紹專區。
WF101JSYAHLNB0的電源電壓(VDD)為3.0V~3.6V，典型值為3.3V。模組工作溫度為-20℃~+70℃，儲存溫度為-30℃至+80℃。如果您需要此型號對應的電阻式觸控(RTP) TFT模組，請考慮WF101JSYAHLNT0型號。
規格圖
產品規格
Pin功能定義
| Pin No. | 符號 | 功能說明 |
|---|---|---|
| 1 | VCOM | Common voltage |
| 2 | VDD | Digital power |
| 3 | VDD | Digital power |
| 4 | NC | Not connect |
| 5 | Reset | Global reset pin. Active low to enter reset state. Suggest to connecting with an RC reset circuit for stability. Normally pull high. (R=10KΩ，C=1μF) |
| 6 | STBYB | Standby mode, normally pull high STBYB=”1”, normal operation STBYB=”0”,timing control, source driver will turn off, all output are high-Z |
| 7 | GND | Digital ground |
| 8 | RXIN0- | Negative LVDS differential data inputs |
| 9 | RXIN0+ | Positive LVDS differential data inputs |
| 10 | GND | Digital ground |
| 11 | RXIN1- | Negative LVDS differential data inputs |
| 12 | RXIN1+ | Positive LVDS differential data inputs |
| 13 | GND | Digital ground |
| 14 | RXIN2- | Negative LVDS differential data inputs |
| 15 | RXIN2+ | Positive LVDS differential data inputs |
| 16 | GND | Digital ground |
| 17 | RXCLKN- | Negative LVDS differential clock inputs |
| 18 | RXCLKN+ | Positive LVDS differential clock inputs |
| 19 | GND | Digital ground |
| 20 | RXIN3- | Negative LVDS differential data inputs |
| 21 | RXIN3+ | Positive LVDS differential data inputs |
| 22 | GND | Digital ground |
| 23 | NC | Not connect |
| 24 | NC | Not connect |
| 25 | GND | Digital ground |
| 26 | NC | Not connect |
| 27 | NC | Not connect |
| 28 | SELB | 6-bit/8-bit input select SELB = L , 8-bit ; SELB = H , 6-bit |
| 29 | AVDD | Analog power |
| 30 | GND | Digital ground |
| 31 | LED- | LED Cathode |
| 32 | LED- | LED Cathode |
| 33 | L/R | Left or right display control |
| 34 | U/D | Up / down display control |
| 35 | VGL | Negative power for TFT |
| 36 | NC | Not connect |
| 37 | NC | Not connect |
| 38 | VGH | Positive power for TFT |
| 39 | LED+ | LED Anode |
| 40 | LED+ | LED Anode |
When L/R=”1”,set left to right scan direction.
When U/D=”0”,set top to bottom scan direction.
When U/D=”1”,set bottom to top scan direction.
PCAP PIN 定義
| Pin | 符號 | 功能說明 |
|---|---|---|
| 1 | USB_VSS | System ground |
| 2 | USB_VDD 5V | Power supply |
| 3 | USB_D+ | Data + |
| 4 | USB_D- | Data - |
| 5 | VSS | System ground |
| 6 | SDA | I2C data input and output |
| 7 | SCL | I2C clock input |
| 8 | RST | External Reset, Low is active |
| 9 | INT | External interrupt to the host |
| 10 | VDDT 3.3 | Power supply |
規格說明
| 項目 | 規格 | 單位 |
|---|---|---|
| 顯示尺寸(對角線) | 10.1 | 吋 |
| 點陣(解析度) | 1024 RGB X 600 | dots |
| 模組尺寸 | 235(W) x143(H) x 8.78(D) | mm |
| 可視區域 | 222.72 (H) x 125.28(V) | mm |
| 點間距 | 0.2175(W) x 0.2088(H) | mm |
| LCD類型 | TFT 全透 | |
| 介面 | LVDS | |
| 驅動IC | EK79001HN + EK73215BCGA 或相容IC | |
| 視角 | 85/85/85/85 | |
| 長寬比 | 16:9 | |
| 背光類型 | LED, 白色 | |
| PCAP IC | ILI2511 或相容IC | |
| PCAP 介面 | USB (I2C可用) | |
| PCAP FW 版本 | V6.0.0.0.62.90.1.2 | |
| 觸控面板類型 | 投射電容式觸控面板 (PCAP) | |
| 表面 | 亮面 | |
最大絕對額定值
| 項目 | 符號 | 最小值 | 典型值 | 最大值 | 單位 |
|---|---|---|---|---|---|
| 工作溫度 | TOP | -20 | － | +70 | ℃ |
| 儲存溫度 | TST | -30 | － | +80 | ℃ |
電氣特性
典型操作條件 (At Ta = 25 °C,)
| 項目 | 符號 | 最小值 | 典型值 | 最大值 | 單位 |
|---|---|---|---|---|---|
| LCD數位電源電壓 | VDD | 3 | 3.3 | 3.6 | V |
| 類比電源電壓 | AVDD | 9.89 | 10.2 | 10.5 | V |
| Gate 開啟供電電壓 | VGH | 19.4 | 20.0 | 20.6 | V |
| Gate 關閉供電電壓 | VGL | -10.3 | -10.0 | -9.7 | V |
| 一般供電電壓 | VCOM | 4.0 | 4.3 | 4.6 | V |
| 邏輯輸入高電壓 | VIH | 0.7 VDD | - | VDD | V |
| 邏輯輸入低電壓 | VIL | 0 | - | 0.3 VDD | V |
| Supply PCAP | USB_VDD 5V | 4.4 | 5.0 | 5.5 | V |
| I VDD 5V | — | 97.8 | 120 | mA |
