Pantalla TFT con Control de LCD 5"
Modelo Nº WF50FTYFGDBGA
►Tamaño : 5 pulgada
►Resolución : 800x480 puntos
►Dirección de la vista : 80/80/80/80
►Controlador IC：SSD1963
►Placa de control: Yes
►Brillo (cd/m²) : 400
►Agujero del bastidor : No
►Pantalla táctil : Con panel táctil capacitivo (PCAP)
►O-Film: No
DIBUJO
ESPECIFICACIONES
Función interfaz Pin
| Pin | Símbolo | Función |
|---|---|---|
| 1 | GND | System round pin of the IC. Connect to system ground. |
| 2 | VDD | Power Supply : +3.3V |
| 3 | BL_E | Backlight control signal , H: On \ L: Off |
| 4 | D/C | Data/Command select |
| 5 | WR | Write strobe signal |
| 6 | RD | Read strobe signal |
| 7 | DB0 | Data bus |
| 8 | DB1 | Data bus |
| 9 | DB2 | Data bus |
| 10 | DB3 | Data bus |
| 11 | DB4 | Data bus |
| 12 | DB5 | Data bus |
| 13 | DB6 | Data bus |
| 14 | DB7 | Data bus |
| 15 | DB8 | Data bus (When select 8bits mode, this pin is NC) |
| 16 | DB9 | Data bus (When select 8bits mode, this pin is NC) |
| 17 | DB10 | Data bus (When select 8bits mode, this pin is NC) |
| 18 | DB11 | Data bus (When select 8bits mode, this pin is NC) |
| 19 | DB12 | Data bus (When select 8bits mode, this pin is NC) |
| 20 | DB13 | Data bus (When select 8bits mode, this pin is NC) |
| 21 | DB14 | Data bus (When select 8bits mode, this pin is NC) |
| 22 | DB15 | Data bus (When select 8bits mode, this pin is NC) |
| 23 | NC | No connection |
| 24 | PCAP_INT | PCAP_ External interrupt to the host |
| 25 | CS | Chip select |
| 26 | RST | Hardware reset |
| 27 | NC | No connection |
| 28 | NC | No connection |
| 29 | PCAP_SCL | I2C clock input |
| 30 | PCAP_SDA | I2C data input and output |
| 31 | PCAP_RST | PCAP_ External Reset, Low is active |
| 32 | NC | No connection |
| 33 | VLED- | VLED- for B/L LED inverter (GND) |
| 34 | VLED- | VLED- for B/L LED inverter (GND) |
| 35 | VLED+ | VLED+ for B/L LED inverter |
| 36 | VLED+ | VLED+ for B/L LED inverter |
Especificaciones generales
| Elemento | Dimensión | Unidad |
|---|---|---|
| Tamaño | 5.0 | pulgada |
| Matriz de puntos | 800 × 3(RGB) × 480 | dots |
| Dimensión del módulo | 120.7 x 75.8 x 8.76 (Max) | mm |
| zona activa (AA) | 108.0 × 64.8 | mm |
| Distancia entre puntos | 0.135 x 0.135 | mm |
| Tipo de LCD | TFT, Negro, Transmisivo | |
| Dirección de la vista | 80/80/80/80 | |
| Relación de aspecto | 5:3 | |
| Tipo de retroiluminación | LED, Blanco | |
| Controlador IC | SSD1963 | |
| TFT Interfaz | Digital 8080 family MPU 8bit/16bit | |
| PCAP IC | ILI2130 o equivalente | |
| PCAP Interfaz | I2C | |
| PCAP FW Versión | 0x07.0x00.0x00.0x00.0xA1.0x25.0x50.0x00 | |
| PCAP Resolución | 16384*16384 | |
| Pantalla táctil | Con panel táctil capacitivo (CTP) | |
| Superficie | Deslumbramiento | |
Valores nominales máximos absolutos
| Elemento | Símbolo | Valor mín. | Valor típico | Valor máx. | Unidad |
|---|---|---|---|---|---|
| Temperatura de funcionamiento | TOP | -20 | － | +70 | ℃ |
| Temperatura de almacenamiento | TST | -30 | － | +80 | ℃ |
Características electrónicas
| Elemento | Símbolo | Valor mín. | Valor típico | Valor máx | Unidad |
|---|---|---|---|---|---|
| Supply Voltage For LCM | VDD | 3.1 | 3.3 | 3.6 | V |
| Supply Current For LCM | IDD | - | 76 | 114 | mA |
