5.7" Standard TFT-LCD Module
Model No. WF57VTIACDNN0
►Size : 5.7 inch
►Resolution : 320 x 240 dots
►View Direction : 12H
►Interface : RGB
►Driver IC：HX8218+HX8615
►Control-Board : No
►Brightness(cd/m²): 500
►Frame Through Hole : Yes
►Touch Screen : No
►O-Film : Option
Description
WF57VTIACDNN0 is a 5.7-inch standard TFT LCD featuring a resolution of 320 x 240 dots and a brightness of 500 cd/m2. Equipped with an HX8218+HX8615 driver IC supporting 24-bit RGB interfaces, this TFT module operates with a voltage power supply of 3.3V (typical value). Its module dimensions measure 160.0(W) × 109.0(H) mm, with an active area of 115.20 × 86.40 mm.
WF57VTIACDNN0 boasts a 12 o'clock viewing direction, 6 o'clock grayscale inversion, and a 4:3 aspect ratio. Operating temperature ranges from -20℃ to +70℃, while its storage temperature spans from -30℃ to +80℃.
This type of display finds ideal integration into various medical devices such as patient monitoring systems, ultrasound machines, and medical imaging equipment, where clear and precise visual feedback is essential for accurate diagnosis and treatment.
In industrial automation and control systems, this TFT display is invaluable for monitoring and controlling machinery, equipment, and processes. It provides operators with real-time data and visual feedback, ensuring the efficient operation and maintenance of industrial facilities.
DRAWING
SPECIFICATIONS
Interface
| Pin | Symbol | Function |
|---|---|---|
| 1 | IF1 | Input data format control |
| 2 | IF2 | Input data format control |
| 3 | POL | Polarity Signal connect to VCOM driving circuit. |
| 4 | RESET | Hardware reset |
| 5 | SPENA | Chip select |
| 6 | SPCL | Serial Clock |
| 7 | SPDA | Serial Data |
| 8 | B0 | Blue Data bit |
| 9 | B1 | Blue Data bit |
| 10 | B2 | Blue Data bit |
| 11 | B3 | Blue Data bit |
| 12 | B4 | Blue Data bit |
| 13 | B5 | Blue Data bit |
| 14 | B6 | Blue Data bit |
| 15 | B7 | Blue Data bit |
| 16 | G0 | Green Data bit |
| 17 | G1 | Green Data bit |
| 18 | G2 | Green Data bit |
| 19 | G3 | Green Data bit |
| 20 | G4 | Green Data bit |
| 21 | G5 | Green Data bit |
| 22 | G6 | Green Data bit |
| 23 | G7 | Green Data bit |
| 24 | R0 | Red Data bit |
| 25 | R1 | Red Data bit |
| 26 | R2 | Red Data bit |
| 27 | R3 | Red Data bit |
| 28 | R4 | Red Data bit |
| 29 | R5 | Red Data bit |
| 30 | R6 | Red Data bit |
| 31 | R7 | Red Data bit |
| 32 | Hsync | Horizontal synchronous signal |
| 33 | Vsync | Vertical synchronous signal |
| 34 | Data CLK | Dot data clock |
| 35 | AVDD(analog) | Analog power: 4.5V~5.5V |
| 36 | AVDD(analog) | Analog power: 4.5V~5.5V |
| 37 | VCC(Digital) | Digital power: 3V~3.6V |
| 38 | VCC(Digital) | Digital power: 3V~3.6V |
| 39 | NPC | NTSC/PAL mode Auto detection result H:NTSC/L:PAL |
| 40 | VGL | Gate off power |
| 41 | VGL | Gate off power |
| 42 | U/D | Up/down selection |
| 43 | VGH | Gate on power |
| 44 | L/R | Shift direction of device internal shift register control. |
| 45 | GND | System ground pin of the IC. Connect to system ground. |
| 46 | VCOM | VCOM driving input |
| 47 | VCOM | VCOM driving input |
| 48 | ENB | Signal to settle the horizontal display position |
| 49 | GND | System ground pin of the IC. Connect to system ground. |
| 50 | GND | System ground pin of the IC. Connect to system ground. |
General Specifications
| Item | Dimension | Unit |
|---|---|---|
| Size | 5.7 | inch |
| Dot Matrix | 320 × RGB × 240 (TFT) | dots |
| Module dimension | 160.0(W) × 109.0(H) × 8.3(D) | mm |
| Active area | 115.20 × 86.40 | mm |
| Dot pitch | 0.12 × 0.36 | mm |
| LCD type | TFT, Normally White, Transmissive | |
| View Direction | 12 o'clock | |
| Gray Scale Inversion Direction | 6 o'clock | |
| TFT Interface | 24-bit RGB | |
| TFT Drive IC | HX8218+HX8615 or Equivalent | |
| Aspect Ratio | 4:3 | |
| Backlight Type | LED, Normally White | |
| Touch Screen | Without touch screen | |
| Surface | Glare | |
Absolute Maximum Ratings
| Item | Symbol | Min | Typ | Max | Unit |
|---|---|---|---|---|---|
| Operating Temperature | TOP | -20 | － | +70 | ℃ |
| Storage Temperature | TST | -30 | － | +80 | ℃ |
Electrical Characteristics
1. Operating conditions| Item | Symbol | Min | Typ | Max | Unit |
|---|---|---|---|---|---|
| Supply Voltage For LCM | VCC | 3.2 | 3.3 | 3.4 | V |
| Supply Current For LCM | ICC | － | 30 | 45 | mA |
| Input High Volt. | VIH | 0.7 VCC | － | VCC | V |
| Input Low Volt. | VIL | 0 | － | 0.3 VCC | V |
| LCD Driving Supply Voltage |
VGH | 15 | 16 | 17 | V |
| VGL | -6 | -5 | -4 | V | |
| VCOMH | － | 4.5 | - | V | |
| VCOML | － | -0.5 | - | V | |
| AVDD | 4.5 | 5.0 | 5.5 | V |
2. LED driving conditions
| Parameter | Symbol | Min | Typ | Max | Unit |
|---|---|---|---|---|---|
| LED current | - | - | 140 | - | mA |
| Power Consumption | - | 1260 | - | 1470 | mW |
| LED voltage | VBL+ | 9.0 | - | 10.5 | V |
| LED Life Time | - | - | 50,000 | - | Hr |
