TFT LCD IPS 1024x600 suporte conector de HDMI de 10,1" com painel de toque capacitivo
Model No. WF101JSYFHLHBV
►Tamanho: 10.1 polegadas
►Resolução: 1024x600 pontos
►Direção de exibição: IPS
►Interface: suporte conector de HDMI (Somente sinal DVI)
►Controlador TFP401 integrado
►Brightness(cd/m2): 850
►Quadro com furo passante: Não
►Tela de toque: Com painel de toque capacitivo (tela)
►Detect Point (Fingers) : 1 / 2 / Option
►Temperatura de operação : -20~+70℃
Descrição
WF101JSYFHLHBV é um módulo LCD TFT IPS de 10,1 polegadas; fabricado com resolução 1024x600 pixéis e a relação de aspecto é de 16:9 com tela tátil capacitiva e projetada no módulo. Este modelo está integrado com Ics controladores EK79001HN e EK73215BCGA, ele suporta sinal HDMI (somente para DVI). O painel tátil capacitivo está integrado com o IC controlador ILI2511 que suporta interface USB com um 5 ponto de detecção.
Este TFT-LCD é apresentado com painel IPS que tem as vantagens de um ângulo de visualização mais amplo de Esquerda:85 / Direita:85 / Cima:85 / Baixo:85 graus (típico). Ele tem alto brilho, com um brilho de 850 cd/㎡ e relação de contraste (valor típico) de 800:1. Esta série de módulos pode operar a temperaturas de -20℃ a +70℃; suas temperaturas de armazenamento variam de -30℃ a +80℃.
Você pode simplesmente usar este display TFT com seu Raspberry Pi, ou também pode usar como display de computador com qualquer dispositivo que suporte saída de sinal HDMI.
DRAWING
SPECIFICATIONS
Especificações Gerais
Item | Dimensão | Unidade |
---|---|---|
Tamanho | 10.1 | polegadas |
Matriz de pontos | 1024 RGB x 600 | pontos |
Dimensão do módulo | 235(W) x143(H) x 27.96(MAX)(D) | mm |
Área ativa | 222.72 (H) x 125.28(V) | mm |
Distância entre pontos | 0.2175(W) x 0.2088(H) | mm |
Modo de exibição | TFT, Preto, Transmissivo | |
Ângulo de exibição | 85/85/85/85 | |
Pixel Arrangement | RGB-STRIPE | |
Relação de aspecto | 16:9 | |
IC do controlador | EK79001HN + EK73215BCGA ou equivalente | |
Tipo de luz de fundo | LED, Branco | |
Electrical Interface (Logic) | Support HDMI Connector (Only DVI Signal) | |
PCAP IC | ILI2511 ou equivalente | |
PCAP Interface | USB | |
Versão PCAP FW | V6.0.0.0.62.90.1.2 | |
Painel de toque | painel de toque capacitivo | |
Superfície | Reflexo |
Classificações Máximas Absolutas
Item | Símbolo | Valor Min | Valor Típico | Valor Máximo | Unidade |
---|---|---|---|---|---|
Temperatura de operação | TOP | -20 | - | +70 | ℃ |
Temperatura de armazenamento | TST | -30 | - | +80 | ℃ |
Características Eletrônicas
Item | Símbolo | Condição | Valor Min | Valor Típico | Valor Máximo | Unidade |
---|---|---|---|---|---|---|
Supply Voltage For LCM | VDD | - | 4.7 | 5 | 5.3 | V |
Supply Current For LCM | IDD | - | - | 1.7 | 2.6 | A |
LED life time | - | - | 50000 | - | - | Hr |
Função do pino de interface
1.CON6
Pin No. | Símbolo | Função |
---|---|---|
1 | NC | No connection |
2 | 5V | Raspberry Pi:Power 5V |
3 | GPIO02 | Raspberry Pi:GPIO02 |
4 | 5V | Raspberry Pi:Power 5V |
5 | GPIO03 | Raspberry Pi:GPIO03 |
6 | GND | Raspberry Pi:GND |
7 | GPIO04 | Raspberry Pi:GPIO04 |
8 | GPIO14 | Raspberry Pi:GPIO14 |
9 | GND | Raspberry Pi:GND |
10 | GPIO15 | Raspberry Pi:GPIO15 |
11 | GPIO17 | Raspberry Pi:GPIO17 |
12 | BL-PWM (GPIO18) |
Backlight Enable ,Active_L (Raspberry Pi:GPIO18) |
13 | GPIO27 | Raspberry Pi:GPIO27 |
14 | GND | Raspberry Pi:GND |
15 | GPIO22 | Raspberry Pi:GPIO22 |
16 | GPIO23 | Raspberry Pi:GPIO23 |
17 | NC | No connection |
18 | GPIO24 | Raspberry Pi:GPIO24 |
19 | GPIO10 | Raspberry Pi:GPIO10 |
20 | GND | Raspberry Pi:GND |
21 | GPIO09 | Raspberry Pi:GPIO09 |
22 | GPIO25 | Raspberry Pi:GPIO25 |
23 | GPIO11 | Raspberry Pi:GPIO11 |
24 | GPIO08 | Raspberry Pi:GPIO08 |
25 | GND | Raspberry Pi:GND |
26 | GPIO07 | Raspberry Pi:GPIO07 |
27 | ID_SD | Raspberry Pi:ID_SD |
28 | ID_SC | Raspberry Pi:ID_SC |
29 | GPIO05 | Raspberry Pi:GPIO05 |
30 | GND | Raspberry Pi:GND |
31 | GPIO06 | Raspberry Pi:GPIO06 |
32 | GPIO12 | Raspberry Pi:GPIO12 |
33 | GPIO13 | Raspberry Pi:GPIO13 |
34 | GND | Raspberry Pi:GND |
35 | GPIO19 | Raspberry Pi:GPIO19 |
36 | GPIO16 | Raspberry Pi:GPIO16 |
37 | GPIO26 | Raspberry Pi:GPIO26 |
38 | GPIO20 | Raspberry Pi:GPIO20 |
39 | GND | Raspberry Pi:GND |
40 | GPIO21 | Raspberry Pi:GPIO21 |
2.CON5
Pin No. | Símbolo | Função |
---|---|---|
1 | 3.3V | TFT Module Power limit can only output 3.3V,100mA |
2 | 5V | Raspberry Pi:Power 5V |
3 | GPIO02 | Raspberry Pi:GPIO02 |
4 | 5V | Raspberry Pi:Power 5V |
5 | GPIO03 | Raspberry Pi:GPIO03 |
6 | GND | Raspberry Pi:GND |
7 | GPIO04 | Raspberry Pi:GPIO04 |
8 | GPIO14 | Raspberry Pi:GPIO14 |
9 | GND | Raspberry Pi:GND |
10 | GPIO15 | Raspberry Pi:GPIO15 |
11 | GPIO17 | Raspberry Pi:GPIO17 |
12 | BL-PWM (GPIO18) |
Backlight Enable ,Active_L (Raspberry Pi:GPIO18) |
13 | GPIO27 | Raspberry Pi:GPIO27 |
14 | GND | Raspberry Pi:GND |
15 | GPIO22 | Raspberry Pi:GPIO22 |
16 | GPIO23 | Raspberry Pi:GPIO23 |
17 | 3.3V | TFT Module Power limit can only output 3.3V,100mA |
18 | GPIO24 | Raspberry Pi:GPIO24 |
19 | GPIO10 | Raspberry Pi:GPIO10 |
20 | GND | Raspberry Pi:GND |
21 | GPIO09 | Raspberry Pi:GPIO09 |
22 | GPIO25 | Raspberry Pi:GPIO25 |
23 | GPIO11 | Raspberry Pi:GPIO11 |
24 | GPIO08 | Raspberry Pi:GPIO08 |
25 | GND | Raspberry Pi:GND |
26 | GPIO07 | Raspberry Pi:GPIO07 |
27 | ID_SD | Raspberry Pi:ID_SD |
28 | ID_SC | Raspberry Pi:ID_SC |
29 | GPIO05 | Raspberry Pi:GPIO05 |
30 | GND | Raspberry Pi:GND |
31 | GPIO06 | Raspberry Pi:GPIO06 |
32 | GPIO12 | Raspberry Pi:GPIO12 |
33 | GPIO13 | Raspberry Pi:GPIO13 |
34 | GND | Raspberry Pi:GND |
35 | GPIO19 | Raspberry Pi:GPIO19 |
36 | GPIO16 | Raspberry Pi:GPIO16 |
37 | GPIO26 | Raspberry Pi:GPIO26 |
38 | GPIO20 | Raspberry Pi:GPIO20 |
39 | GND | Raspberry Pi:GND |
40 | GPIO21 | Raspberry Pi:GPIO21 |
3.PCAP USB PIN Definition
Pin | Símbolo | Função |
---|---|---|
1 | 5V | Power Supply (5V) |
2 | D- | Data line - |
3 | D+ | Data line + |
4 | NC | No connection |
5 | GND | Power Ground |
4.DVI
Pin No. | Símbolo | I/O | Função |
---|---|---|---|
1 | Rx2+ | I | +LVDS Differential Data Input |
2 | GND | P | Ground |
3 | Rx2- | I | -LVDS Differential Data Input |
4 | Rx1+ | I | +LVDS Differential Data Input |
5 | GND | P | Ground |
6 | Rx1- | I | -LVDS Differential Data Input |
7 | Rx0+ | I | +LVDS Differential Data Input |
8 | GND | P | Ground |
9 | Rx0- | I | -LVDS Differential Data Input |
10 | RxC+ | I | +LVDS Differential Clock Input |
11 | GND | P | Ground |
12 | RxC- | I | -LVDS Differential Clock Input |
13-14 | NC | - | No connection |
15 | SCL | I/O | DDC(Data Display Channel) Clock |
16 | SDA | I/O | DDC(Data Display Channel) Data |
17 | GND | P | Ground |
18 | 5V | P | Power Supply |
19 | Detect | I/O | Hot plug detect |
5.Power-Jack
Pin No. | Símbolo | I/O | Função |
---|---|---|---|
1 | 5V | P | Power Supply (5V) |
2 | GND | P | Ground |
3 | NC | - | No connection |