Wysoka jasność wyświetlaczy IPS TFT 4" 480x480 (Pojemnościowy panel dotykowy)
Numer modelu WF40ESWAA6DNG0
►Rozmiar: 4 calowy
►Rozdzielczość : 480x480 punktów
►godzina obserwacji: IPS
►Interfejs: RGB
►Kontroler: ST7701S
►Płyta kontrolera : Brak
►Jasbrakść(cd/m²): 1000
► otwory w ramie: Brak
►Panel dotykowy : Pojemnościowy panel dotykowy (PCAP)
►Detect Point : 5 Fingers
►temperatura pracy : -30~+80 °C
Rysunek
Specyfikacja
Funkcja pinów interfejsu
LCM PIN Definition
Pin | Symbol | Funkcja |
---|---|---|
1 | VLED- | Power for LED backlight cathode |
2 | VLED+ | Power for LED backlight anode |
3 | GND | Power ground |
4 | VCC | Power supply |
5 | R0 | Data bus |
6 | R1 | |
7 | R2 | |
8 | R3 | |
9 | R4 | |
10 | R5 | |
11 | R6 | |
12 | R7 | |
13 | G0 | Data bus |
14 | G1 | |
15 | G2 | |
16 | G3 | |
17 | G4 | |
18 | G5 | |
19 | G6 | |
20 | G7 | |
21 | B0 | Data bus |
22 | B1 | |
23 | B2 | |
24 | B3 | |
25 | B4 | |
26 | B5 | |
27 | B6 | |
28 | B7 | |
29 | SCL | SCL: Serial clock input for SPI interface. |
30 | PCLK | Dot clock signal for RGB interface operation |
31 | CS | - A chip select signal Low: the chip is selected and accessible High: the chip is not selected and not accessible |
32 | HSYNC | Line synchronizing signal for RGB interface operation |
33 | VSYNC | Frame synchronizing signal for RGB interface operation |
34 | DE | Data enable signal for RGB interface operation Low: access enabled High: access inhibited |
35 | SDA | SDA: Serial data input/output bidirectional pin for SPI Interface. |
36 | RESET | - The external reset input - Initializes the chip with a low input. Be sure to execute a power-on reset after supplying power. |
37-40 | NC | No connect |
PCAP PIN Definition
Pin | Symbol | Funkcja |
---|---|---|
1 | VSS | Ground for analog circuit |
2 | VDDT | Power Supply : +3.0V |
3 | SCL | I2C clock input |
4 | NC | No connect |
5 | SDA | I2C data input and output |
6 | NC | No connect |
7 | /RST | External Reset, Low is active |
8 | NC | No connect |
9 | /INT | External interrupt to the host |
10 | VSS | Ground for analog circuit |
Ogólna specyfikacja
Rzecz | Wymiar | Jednostka |
---|---|---|
Rozmiar (Przekątna) | 4.0 | cale |
Matryca punktowa (Rozdzielczość) | 480 × 3(RGB) × 480 | punktów |
Wymiary modułu | 78.8(H) × 82.95 (W) × 7.17 | mm |
Obszar aktywny | 71.856(H) × 70.176 (V) | mm |
Raster pomiędzy pikselami | 0.1497(H) × 0.1462(V) | mm |
Rodzaj LCD | TFT, czarny, Transmisyjny | |
godzina obserwacji | 80/80/80/80 | |
Proporcje | 1:1 | |
Interfejs | 24-bit RGB | |
Kontroler | ST7701S albo odpowiednik | |
Rodzaj podświetlenia | LED ,biały | |
PCAP IC | ST1633I albo odpowiednik | |
PCAP Interfejs | I2C | |
PCAP FW Version | V01 | |
Panel dotykowy | PCAP, pojemnościowy panel dotykowy | |
Powierzchnia | Anti-Glare |
Bezwzględne oceny maksymalne
Rzecz | Symbol | Minimalna wartość | Typowa wartość | Maksymalna wartość | Jednostka |
---|---|---|---|---|---|
Temperatura pracy | TOP | -30 | - | +80 | ℃ |
Temperatura przechowywania | TST | -30 | - | +80 | ℃ |
Parametry elektryczne
Typical Operation Conditions
Rzecz | Symbol | Standardowa wartość | Jednostka | ||
---|---|---|---|---|---|
Minimalna wartość | Typowa wartość | Maksymalna wartość | |||
Interface Supply Voltage | VCC | 2.5 | 2.8 | 3.6 | V |
Current for Driver(White) | IVCC | - | 27 | 40.5 | mA |
Supply PCAP | VDDT | 2.8 | - | 3.3 | V |
ICTP(mA) | - | 12.4 | 18.6 | mA |