128x64 COG 액정 디스플레이 (ST7567S) - WO12864T1

128x64 COG 액정 디스플레이 (ST7567S)

모델 번호 WO12864T1

►128x64 COG 디스플레이
►그래픽 LCD
►IC: ST7565S
►3V 전원 공급 장치
►1/65 듀티 사이클, 1/9 bias
►인터페이스 : 6800/8080/SPI

PDF 다운로드

데모 코드 조회에 추가

이전 목록으로 돌아가기 다음

도면

128x64 Chip on Glass LCD (ST7567S) - WO12864T1

Data source ref:WO12864T1-TFH#

사양

인터페이스 핀 기능

Pin No.

기호

설명

VDD

Power supply pin for logic.

VSS

Ground pin, connected to 0V

CSB

Chip select input pin.

RSTB

Hardware reset input pin

It determines whether the access is related to data or
command.

RWR

C86	MPU Type	RWR	설명
H	6800 series	R/W	Read/Write control input pin. R/W=“H”: read. R/W=“L”: write.
L	8080 series	/WR	Write enable input pin. Signals on D[7:0] will be latched at the rising edge of /WR signal.

RWR is not used 4-line SPI interface and should fix to “H” by VDD

ERD

C86	MPUType	ERD	설명
H	6800 series	E	Read/Write control input pin. R/W=”H“: When E is “H”, D[7:0] are in output mode. R/W=”L“: Signals on D[7:0] are latched at the falling edge of E signal.
L	8080 series	/RD	Read enable input pin. When /RD is “L”, D[7:0] are in output mode.

ERD is not used in 4-Line SPI interface and should fix to “H” by VDD

9~16

D0~D7

When using 8-bit parallel interface: (6800 or 8080 mode)
8-bit bi-directional data bus. Connect to the data bus of 8-bit microprocessor.
When CSB is non-active (CSB=“H”), D[7:0] pins are high impedance

When using serial interface: 4-line SPI
D[0]=SCL: Serial clock input.
D[1]=SDA_IN: Serial data input.
D[2:3]=SDA_OUT: Serial data output.
D[1:3] must be connected together as SDA.
D[4:7]=(1,1,1,1): ID Pin. D[4:7] should fix to “H” or “L” by VDDH or VSSL.
ID[0:3] can be read 4-bit ID only for serial interface from D[4:7].

C86

C86 selects the microprocessor type in parallel interface mode.

PSB	C86	Selected Interface
“L”	“H”	Serial 4-Line SPI Interface
“H”	“L”	Parallel 8080 Series MPU Interface
“H”	“H”	Parallel 6800 Series MPU Interface

PSB

PSB selects the interface type: Serial or Parallel.

일반 사양

항목	치수	단위
도트 매트릭스 (해상도)	128 × 64	－
모듈 치수	38.0 × 26.42 × 8.8(MAX)	mm
보기 영역	29.58 × 16.22	mm
활성 영역	25.58 × 14.06	mm
도트 크기	0.18 × 0.20	mm
도트 피치	0.20 × 0.22	mm
Duty	1/65 DUTY;1/9 BIAS
뷰 방향	6 o'clock
역광 타입	LED
IC	ST7567S
인터페이스	6800 series/8080 series/4-Line SPI

절대 최대 정격값

항목	기호	최소값	대표값	최대값	단위
작동 온도	T_OP	-20	－	+70	℃
보관 온도	T_ST	-30	－	+80	℃
Input Voltage	V_I	-0.3	－	VDD+0.3	V
Digital Power Supply Voltage	V_DD-V_ss	-0.3	－	4.0	V
LCD Power supply voltage	V0-XV0	-0.3	－	14.0	V

전기적 특성

항목	기호	조건	최소값	대표값	최대값	단위
Supply Voltage For Logic	V_DD-V_SS	－	2.7	3.0	3.3	V
Supply Voltage For LCD	V_OP	Ta=-20℃ Ta=25℃ Ta=70℃	－ 8.9 －	－ 9.1 －	－ 9.3 －	V V V
Input High Volt.	V_IH	－	0.7V_DD	－	V_DD	V
Input Low Volt.	V_IL	－	V_SS	－	0.3V_DD	V
Output High Volt.	V_OH	－	0.8V_DD	－	V_DD	V
Output Low Volt.	V_OL	－	V_DD	－	0.2V_DD	V
Supply Current	I_DD	VDD=3.0V	－	－	1.5	mA

Search Keyword: lcd 128x64, lcd 128 x 64, 128x64 lcd, 128 x 64 lcd