Display LCD COG 128x64 (ST7567S) - WO12864T1

Display LCD COG 128x64 (ST7567S)

Modello numero WO12864T1

►LCM COG 128x64
►Tipo: grafico
►Struttura: COG
►Dimensione: 1.15 pollici
►128x64 a matrice di punti
►IC: ST7565S
►Alimentatore 3V
►1/65 duty cycle, 1/9 bias
►Interfaccia : 6800/8080/SPI

SCARICA PDF

DEMO CODE AGGIUNGI ALLA RICHIESTA

PREV. Torna alla lista PROSSIMO

DISEGNO

128x64 Chip on Glass LCD (ST7567S) - WO12864T1

Data source ref:WO12864T1-TFH#

SPECIFICHE TECNICHE

Funzione dei Pin di Interfaccia

Pin No.

Simbolo

descrizione

VDD

Power supply pin for logic.

VSS

Ground pin, connected to 0V

CSB

Chip select input pin.

RSTB

Hardware reset input pin

It determines whether the access is related to data or
command.

RWR

C86	MPU Type	RWR	descrizione
H	6800 series	R/W	Read/Write control input pin. R/W=“H”: read. R/W=“L”: write.
L	8080 series	/WR	Write enable input pin. Signals on D[7:0] will be latched at the rising edge of /WR signal.

RWR is not used 4-line SPI interface and should fix to “H” by VDD

ERD

C86	MPUType	ERD	descrizione
H	6800 series	E	Read/Write control input pin. R/W=”H“: When E is “H”, D[7:0] are in output mode. R/W=”L“: Signals on D[7:0] are latched at the falling edge of E signal.
L	8080 series	/RD	Read enable input pin. When /RD is “L”, D[7:0] are in output mode.

ERD is not used in 4-Line SPI interface and should fix to “H” by VDD

9~16

D0~D7

When using 8-bit parallel interface: (6800 or 8080 mode)
8-bit bi-directional data bus. Connect to the data bus of 8-bit microprocessor.
When CSB is non-active (CSB=“H”), D[7:0] pins are high impedance

When using serial interface: 4-line SPI
D[0]=SCL: Serial clock input.
D[1]=SDA_IN: Serial data input.
D[2:3]=SDA_OUT: Serial data output.
D[1:3] must be connected together as SDA.
D[4:7]=(1,1,1,1): ID Pin. D[4:7] should fix to “H” or “L” by VDDH or VSSL.
ID[0:3] can be read 4-bit ID only for serial interface from D[4:7].

C86

C86 selects the microprocessor type in parallel interface mode.

PSB	C86	Selected Interface
“L”	“H”	Serial 4-Line SPI Interface
“H”	“L”	Parallel 8080 Series MPU Interface
“H”	“H”	Parallel 6800 Series MPU Interface

PSB

PSB selects the interface type: Serial or Parallel.

Specifiche generali

Articolo	Dimensioni	Unità
A matrice di punti (Risoluzione)	128 × 64	－
Dimensione del modulo	38.0 × 26.42 × 8.8(MAX)	mm
Area di visualizzazione	29.58 × 16.22	mm
Area attiva	25.58 × 14.06	mm
Dimensioni del Dot	0.18 × 0.20	mm
Passo del Dot	0.20 × 0.22	mm
Duty	1/65 DUTY;1/9 BIAS
Tipo di backlight	LED
IC	ST7567S
Interfaccia	6800 series/8080 series/4-Line SPI

Valori massimi assoluti

Articolo	Simbolo	Valore Min	Valore tipico	Valore massimo	Unità
Temperatura di lavoro	T_OP	-20	－	+70	℃
Temperatura di stock	T_ST	-30	－	+80	℃
Input Voltage	V_I	-0.3	－	VDD+0.3	V
Digital Power Supply Voltage	V_DD-V_ss	-0.3	－	4.0	V
LCD Power supply voltage	V0-XV0	-0.3	－	14.0	V

Caratteristiche elettriche

Articolo	Simbolo	Condizione	Valore Min	Valore tipico	Valore massimo	Unità
Supply Voltage For Logic	V_DD-V_SS	－	2.7	3.0	3.3	V
Supply Voltage For LCD	V_OP	Ta=-20℃ Ta=25℃ Ta=70℃	－ 8.9 －	－ 9.1 －	－ 9.3 －	V V V
Input High Volt.	V_IH	－	0.7V_DD	－	V_DD	V
Input Low Volt.	V_IL	－	V_SS	－	0.3V_DD	V
Output High Volt.	V_OH	－	0.8V_DD	－	V_DD	V
Output Low Volt.	V_OL	－	V_DD	－	0.2V_DD	V
Supply Current	I_DD	VDD=3.0V	－	－	1.5	mA