Modulo IPS TFT-LCD 5" alta luminosità, 800x480 px, touch capacitivo (PCAP)
Modello numero WF50FSYFGDHGV
►Dimensione : 5 pollici
►Risoluzione : 800x480 punti
►Direzione di visione : 80/80/80/80 (IPS)
►Interfaccia: Support HDMI Connector (Only DVI Signal)
►Controllo IC : TFP401
►Scheda di controllo : Yes
►Luminosità (cd/m2) : 750
►Cornice di fissaggio : No
►Touch Screen : con pannello touch capacitivo (PCAP)
►Detect Point (Fingers) : 1 / 2 / Option
►Temperatura di funzionamento : -20~+70℃
Descrizione
WF50FSYFGDHGV è un modulo IPS TFT-LCD da 5 pollici ad alta luminosità con risoluzione di 800x480 pixel e pannello capacitivo touch (PCAP). WF50FSYFGDHGV è dotato di una scheda di controllo che supporta solo l'interfaccia segnale HDMI del sistema Raspberry PI (solo DVI). Sulla scheda di controllo è presente un connettore GPIO a 40 pin progettato per semplificare l'utilizzo con Raspberry Pi. La scheda di controllo del modulo presenta quattro fori di montaggio che offrono un metodo facile per fissare i moduli sulle applicazioni. WF50FSYFGDHGV adotta un pannello IPS che offre un angolo di visione più ampio di Sinistra: 80 / Destra: 80 / Su: 80 / Giù: 80 gradi (valore tipico). La luminosità è di 750 nit (valore tipico); il pannello capacitivo touch è dotato di un IC ILI2130 che supporta l'interfaccia USB. Offriamo anche pannelli touch resistivi (RTP) per la serie di segnali HDMI WF50F, con il numero di parte disponibile WF50FSYFGDHTV (schermo touch RTP).
La tensione di alimentazione per LCM (VDD) di WF50FSYFGDHGV è di 5V, con vetro superficiale antiriflesso, rapporto di aspetto 5:3 e rapporto di contrasto di 1000:1 (valore tipico). Può essere utilizzato a temperature comprese tra -20°C e +70°C, con temperature di conservazione da -30°C a +80°C.
La serie WF50F con connettore HDMI (segnale DVI) ha superato con successo i test CE ed ha ottenuto la certificazione. Per un rapporto dettagliato di test, si prega di fare clic sul link seguente.
CE Certificate Download |
EMC Test Report Download |
DISEGNO
SPECIFICHE TECNICHE
Specifiche generali
Articolo | Dimensioni | Unità |
---|---|---|
Dimensione | 5 | pollici |
A matrice di punti | 800 × 3(RGB) × 480 | dots |
Dimensione del modulo | 120.7 x 75.8 x 23.2 (Max) | mm |
Area attiva | 108.0 x 64.8 | mm |
Passo del Dot | 0.135 x 0.135 | mm |
Tipo LCD | TFT, Nero, Transmissive | |
Direzione di visione | 80/80/80/80 | |
Proporzioni dell’area visiva (ratio) | 5:3 | |
Tipo di backlight | LED, Bianco | |
Controllore IC | TFP401 | |
Interfaccia | Support HDMI Connector (Only DVI Signal) | |
PCAP IC | ILI2130 o equivalente | |
PCAP FW versione | 0x07.0x00.0x00.0x00.0xA1.0x25.0x50.0x00 | |
PCAP Risoluzione | 16384*16384 | |
PCAP Interfaccia | USB | |
Con / senza Touch Panel | con pannello touch capacitivo, PCAP | |
Superficie | Glare |
Valori massimi assoluti
Articolo | Simbolo | Valore Min | Valore tipico | Valore massimo | Unità |
---|---|---|---|---|---|
Temperatura di lavoro | TOP | -20 | - | +70 | ℃ |
Temperatura di stock | TST | -30 | - | +80 | ℃ |
Caratteristiche elettriche
Articolo | Simbolo | Valore Min | Valore tipico | Valore massimo | Unità |
---|---|---|---|---|---|
Supply Voltage For LCM | VDD | 4.9 | 5 | 5.1 | V |
Supply Current For LCM | IDD | - | 490 | 750 | mA |
LED life time | - | - | 50,000 | - | mA |
Funzione dei Pin di Interfaccia
1. LCM PIN Definition(CON4)
Pin | Simbolo | Funzione | Remark |
---|---|---|---|
1 | NC | No connection | |
2 | 5V | Raspberry Pi:Power 5V | |
3 | GPIO02 | Raspberry Pi:GPIO02 | |
4 | 5V | Raspberry Pi:Power 5V | |
5 | GPIO03 | Raspberry Pi:GPIO03 | |
6 | GND | Raspberry Pi:GND | |
7 | GPIO04 | Raspberry Pi:GPIO04 | |
8 | GPIO14 | Raspberry Pi:GPIO14 | |
9 | GND | Raspberry Pi:GND | |
10 | GPIO15 | Raspberry Pi:GPIO15 | |
11 | GPIO17 | Raspberry Pi:GPIO17 | |
12 | GPIO18 | Raspberry Pi:GPIO18 (Backlight Enable) | |
13 | GPIO27 | Raspberry Pi:GPIO27 | |
14 | GND | Raspberry Pi:GND | |
15 | GPIO22 | Raspberry Pi:GPIO22 | |
16 | GPIO23 | Raspberry Pi:GPIO23 | |
17 | NC | No connection | |
18 | GPIO24 | Raspberry Pi:GPIO24 | |
19 | GPIO10 | Raspberry Pi:GPIO10 | |
20 | GND | Raspberry Pi:GND | |
21 | GPIO09 | Raspberry Pi:GPIO09 | |
22 | GPIO25 | Raspberry Pi:GPIO25 | |
23 | GPIO11 | Raspberry Pi:GPIO11 | |
24 | GPIO08 | Raspberry Pi:GPIO08 | |
25 | GND | Raspberry Pi:GND | |
26 | GPIO07 | Raspberry Pi:GPIO07 | |
27 | ID_SD | Raspberry Pi:ID_SD | |
28 | ID_SC | Raspberry Pi:ID_SC | |
29 | GPIO05 | Raspberry Pi:GPIO05 | |
30 | GND | Raspberry Pi:GND | |
31 | GPIO06 | Raspberry Pi:GPIO06 | |
32 | GPIO12 | Raspberry Pi:GPIO12 | |
33 | GPIO13 | Raspberry Pi:GPIO13 | |
34 | GND | Raspberry Pi:GND | |
35 | GPIO19 | Raspberry Pi:GPIO19 | |
36 | GPIO16 | Raspberry Pi:GPIO16 | |
37 | GPIO26 | Raspberry Pi:GPIO26 | |
38 | GPIO20 | Raspberry Pi:GPIO20 | |
39 | GND | Raspberry Pi:GND | |
40 | GPIO21 | Raspberry Pi:GPIO21 |
2. (CON5)
Pin | Simbolo | Funzione | Remark |
---|---|---|---|
1 | 3.3V | TFT Module Power limit can only output 3.3V,100mA | Note1 |
2 | 5V | Raspberry Pi:Power 5V | |
3 | GPIO02 | Raspberry Pi:GPIO02 | |
4 | 5V | Raspberry Pi:Power 5V | |
5 | GPIO03 | Raspberry Pi:GPIO03 | |
6 | GND | Raspberry Pi:GND | |
7 | GPIO04 | Raspberry Pi:GPIO04 | |
8 | GPIO14 | Raspberry Pi:GPIO14 | |
9 | GND | Raspberry Pi:GND | |
10 | GPIO15 | Raspberry Pi:GPIO15 | |
11 | GPIO17 | Raspberry Pi:GPIO17 | |
12 | GPIO18 | Raspberry Pi:GPIO18 (Backlight Enable) | |
13 | GPIO27 | Raspberry Pi:GPIO27 | |
14 | GND | Raspberry Pi:GND | |
15 | GPIO22 | Raspberry Pi:GPIO22 | |
16 | GPIO23 | Raspberry Pi:GPIO23 | |
17 | 3.3V | TFT Module Power limit can only output 3.3V,100mA | Note1 |
18 | GPIO24 | Raspberry Pi:GPIO24 | |
19 | GPIO10 | Raspberry Pi:GPIO10 | |
20 | GND | Raspberry Pi:GND | |
21 | GPIO09 | Raspberry Pi:GPIO09 | |
22 | GPIO25 | Raspberry Pi:GPIO25 | |
23 | GPIO11 | Raspberry Pi:GPIO11 | |
24 | GPIO08 | Raspberry Pi:GPIO08 | |
25 | GND | Raspberry Pi:GND | |
26 | GPIO07 | Raspberry Pi:GPIO07 | |
27 | ID_SD | Raspberry Pi:ID_SD | |
28 | ID_SC | Raspberry Pi:ID_SC | |
29 | GPIO05 | Raspberry Pi:GPIO05 | |
30 | GND | Raspberry Pi:GND | |
31 | GPIO06 | Raspberry Pi:GPIO06 | |
32 | GPIO12 | Raspberry Pi:GPIO12 | |
33 | GPIO13 | Raspberry Pi:GPIO13 | |
34 | GND | Raspberry Pi:GND | |
35 | GPIO19 | Raspberry Pi:GPIO19 | |
36 | GPIO16 | Raspberry Pi:GPIO16 | |
37 | GPIO26 | Raspberry Pi:GPIO26 | |
38 | GPIO20 | Raspberry Pi:GPIO20 | |
39 | GND | Raspberry Pi:GND | |
40 | GPIO21 | Raspberry Pi:GPIO21 |
PCAP USB PIN Definition(CON3)
Pin | Simbolo | Funzione | Remark |
---|---|---|---|
1 | 5V | Power 5V | |
2 | D- | Data line - | |
3 | D+ | Data line + | |
4 | NC | No connection | |
5 | GND | Power Ground |
4. DVI
Pin No. | Simbolo | I/O | Funzione | Remark |
---|---|---|---|---|
1 | Rx2+ | I | +LVDS Differential Data Input | |
2 | GND | P | Ground | |
3 | Rx2- | I | -LVDS Differential Data Input | |
4 | Rx1+ | I | +LVDS Differential Data Input | |
5 | GND | P | Ground | |
6 | Rx1- | I | -LVDS Differential Data Input | |
7 | Rx0+ | I | +LVDS Differential Data Input | |
8 | GND | P | Ground | |
9 | Rx0- | I | -LVDS Differential Data Input | |
10 | RxC+ | I | +LVDS Differential Clock Input | |
11 | GND | P | Ground | |
12 | RxC- | I | -LVDS Differential Clock Input | |
13-14 | NC | - | No connection | |
15 | SCL | I/O | DDC(Data Display Channel) Clock | |
16 | SDA | I/O | DDC(Data Display Channel) Data | |
17 | GND | P | Ground | |
18 | 5V | P | Power Supply | |
19 | Detect | I/O | Hot plug detect |