Écran Tactile HDMI 5 pouces IPS TFT-LCD 800x480 pixels
N° de modèle WF50FSYFGDHGV
►Dimension 5 pouces
►Résolution d’écran: 800x480 points
►Vue préférentielle 80/80/80/80 (IPS)
►Interface: Support HDMI Connector (Only DVI Signal)
►Contrôleur IC: TFP401
►Carte de contrôle: Yes
►Luminosité (Cd/m²): 750
►Cadre de maintien avec points de fixation: NON
►Dalle tactile: Avec dalle tactile capacitive (PCAP)
►Detect Point (Fingers) : 1 / 2 / Option
►Température d’utilisation: -20~+70℃
Description
WF50FSYFGDHGV est un module IPS TFT-LCD polyvalent de 5 pouces avec une résolution de 800x480 pixels et un écran tactile capacitif (PCAP). WF50FSYFGDHGV est livré avec une carte de contrôle qui prend en charge uniquement l'interface de signal HDMI du système Raspberry PI (uniquement DVI). Il y a un connecteur GPIO à 40 broches sur la carte de contrôle qui est conçu pour faciliter l'utilisation avec Raspberry Pi. La carte de contrôle du module est dotée de quatre trous de montage, offrant une solution pratique pour fixer les modules sur différentes applications. WF50FSYFGDHGV adopte un panneau IPS qui a un angle de vision plus large de Gauche: 80 / Droite: 80 / Haut: 80 / Bas: 80 degrés (valeur typique). La luminosité est de 750 nits (valeur typique) ; le panneau tactile capacitif est intégré avec le circuit ILI2130 qui prend en charge l'interface USB. Nous proposons également des panneaux tactiles résistifs (RTP) pour la série de signaux HDMI WF50F, avec le numéro de pièce disponible WF50FSYFGDHTV (écran tactile RTP).
La tension d'alimentation pour le LCM (VDD) de WF50FSYFGDHGV est de 5V, la surface du verre est en verre anti-éblouissant, le rapport d'aspect est de 5:3, et le rapport de contraste est de 1000:1 (valeur typique). Il peut être utilisé à des températures comprises entre -20°C et +70°C, et les températures de stockage peuvent aller de -30°C à +80°C.
La série WF50F avec connecteur HDMI (signal DVI) a réussi les tests CE et a obtenu la certification. Pour un rapport détaillé de test, veuillez cliquer sur le lien suivant.
CE Certificate Download |
EMC Test Report Download |
DESSIN
SPÉCIFICATIONS
Spécifications générales
Article | Dimensions | Unité |
---|---|---|
Dimension | 5 | pouce |
Matrice de points | 800 × 3(RGB) × 480 | points |
Dimensions du module | 120.7 × 75.8 × 23.2 (Max) | mm |
Zone active | 108.0 × 64.8 | mm |
Pas des points | 0.135 × 0.135 | mm |
Type de LCD | TFT, Noir, Transmissif | |
Vue préférentielle | 80/80/80/80 | |
Rapport d'aspect | 5:3 | |
Type de rétroéclairage | LED, Blanc | |
Contrôleur IC | TFP401 | |
Interface | Support HDMI Connector (Only DVI Signal) | |
PCAP IC | ILI2130 ou équivalent | |
PCAP FW Version | 0x07.0x00.0x00.0x00.0xA1.0x25.0x50.0x00 | |
PCAP Résolution | 16384*16384 | |
PCAP Interface | USB | |
Avec/sans dalle tactile | Avec dalle tactile capacitive, PCAP | |
Surface | Reflets |
Valeurs nominales maximales absolues
Article | Symbole | Valeur min | Valeur type | Valeur max | Unité |
---|---|---|---|---|---|
Température de fonctionnement | TOP | -20 | - | +70 | ℃ |
Température de stockage | TST | -30 | - | +80 | ℃ |
Caractéristiques électroniques
Article | Symbole | Valeur min | Valeur type | Valeur max | Unité |
---|---|---|---|---|---|
Supply Voltage For LCM | VDD | 4.9 | 5 | 5.1 | V |
Supply Current For LCM | IDD | - | 490 | 750 | mA |
LED life time | - | - | 50,000 | - | mA |
Interface
1. LCM PIN Definition(CON4)
Pin | Symbole | Function | Remark |
---|---|---|---|
1 | NC | No connection | |
2 | 5V | Raspberry Pi:Power 5V | |
3 | GPIO02 | Raspberry Pi:GPIO02 | |
4 | 5V | Raspberry Pi:Power 5V | |
5 | GPIO03 | Raspberry Pi:GPIO03 | |
6 | GND | Raspberry Pi:GND | |
7 | GPIO04 | Raspberry Pi:GPIO04 | |
8 | GPIO14 | Raspberry Pi:GPIO14 | |
9 | GND | Raspberry Pi:GND | |
10 | GPIO15 | Raspberry Pi:GPIO15 | |
11 | GPIO17 | Raspberry Pi:GPIO17 | |
12 | GPIO18 | Raspberry Pi:GPIO18 (Backlight Enable) | |
13 | GPIO27 | Raspberry Pi:GPIO27 | |
14 | GND | Raspberry Pi:GND | |
15 | GPIO22 | Raspberry Pi:GPIO22 | |
16 | GPIO23 | Raspberry Pi:GPIO23 | |
17 | NC | No connection | |
18 | GPIO24 | Raspberry Pi:GPIO24 | |
19 | GPIO10 | Raspberry Pi:GPIO10 | |
20 | GND | Raspberry Pi:GND | |
21 | GPIO09 | Raspberry Pi:GPIO09 | |
22 | GPIO25 | Raspberry Pi:GPIO25 | |
23 | GPIO11 | Raspberry Pi:GPIO11 | |
24 | GPIO08 | Raspberry Pi:GPIO08 | |
25 | GND | Raspberry Pi:GND | |
26 | GPIO07 | Raspberry Pi:GPIO07 | |
27 | ID_SD | Raspberry Pi:ID_SD | |
28 | ID_SC | Raspberry Pi:ID_SC | |
29 | GPIO05 | Raspberry Pi:GPIO05 | |
30 | GND | Raspberry Pi:GND | |
31 | GPIO06 | Raspberry Pi:GPIO06 | |
32 | GPIO12 | Raspberry Pi:GPIO12 | |
33 | GPIO13 | Raspberry Pi:GPIO13 | |
34 | GND | Raspberry Pi:GND | |
35 | GPIO19 | Raspberry Pi:GPIO19 | |
36 | GPIO16 | Raspberry Pi:GPIO16 | |
37 | GPIO26 | Raspberry Pi:GPIO26 | |
38 | GPIO20 | Raspberry Pi:GPIO20 | |
39 | GND | Raspberry Pi:GND | |
40 | GPIO21 | Raspberry Pi:GPIO21 |
2. (CON5)
Pin | Symbole | Function | Remark |
---|---|---|---|
1 | 3.3V | TFT Module Power limit can only output 3.3V,100mA | Note1 |
2 | 5V | Raspberry Pi:Power 5V | |
3 | GPIO02 | Raspberry Pi:GPIO02 | |
4 | 5V | Raspberry Pi:Power 5V | |
5 | GPIO03 | Raspberry Pi:GPIO03 | |
6 | GND | Raspberry Pi:GND | |
7 | GPIO04 | Raspberry Pi:GPIO04 | |
8 | GPIO14 | Raspberry Pi:GPIO14 | |
9 | GND | Raspberry Pi:GND | |
10 | GPIO15 | Raspberry Pi:GPIO15 | |
11 | GPIO17 | Raspberry Pi:GPIO17 | |
12 | GPIO18 | Raspberry Pi:GPIO18 (Backlight Enable) | |
13 | GPIO27 | Raspberry Pi:GPIO27 | |
14 | GND | Raspberry Pi:GND | |
15 | GPIO22 | Raspberry Pi:GPIO22 | |
16 | GPIO23 | Raspberry Pi:GPIO23 | |
17 | 3.3V | TFT Module Power limit can only output 3.3V,100mA | Note1 |
18 | GPIO24 | Raspberry Pi:GPIO24 | |
19 | GPIO10 | Raspberry Pi:GPIO10 | |
20 | GND | Raspberry Pi:GND | |
21 | GPIO09 | Raspberry Pi:GPIO09 | |
22 | GPIO25 | Raspberry Pi:GPIO25 | |
23 | GPIO11 | Raspberry Pi:GPIO11 | |
24 | GPIO08 | Raspberry Pi:GPIO08 | |
25 | GND | Raspberry Pi:GND | |
26 | GPIO07 | Raspberry Pi:GPIO07 | |
27 | ID_SD | Raspberry Pi:ID_SD | |
28 | ID_SC | Raspberry Pi:ID_SC | |
29 | GPIO05 | Raspberry Pi:GPIO05 | |
30 | GND | Raspberry Pi:GND | |
31 | GPIO06 | Raspberry Pi:GPIO06 | |
32 | GPIO12 | Raspberry Pi:GPIO12 | |
33 | GPIO13 | Raspberry Pi:GPIO13 | |
34 | GND | Raspberry Pi:GND | |
35 | GPIO19 | Raspberry Pi:GPIO19 | |
36 | GPIO16 | Raspberry Pi:GPIO16 | |
37 | GPIO26 | Raspberry Pi:GPIO26 | |
38 | GPIO20 | Raspberry Pi:GPIO20 | |
39 | GND | Raspberry Pi:GND | |
40 | GPIO21 | Raspberry Pi:GPIO21 |
PCAP USB PIN Definition(CON3)
Pin | Symbole | Function | Remark |
---|---|---|---|
1 | 5V | Power 5V | |
2 | D- | Data line - | |
3 | D+ | Data line + | |
4 | NC | No connection | |
5 | GND | Power Ground |
4. DVI
Pin No. | Symbole | I/O | Function | Remark |
---|---|---|---|---|
1 | Rx2+ | I | +LVDS Differential Data Input | |
2 | GND | P | Ground | |
3 | Rx2- | I | -LVDS Differential Data Input | |
4 | Rx1+ | I | +LVDS Differential Data Input | |
5 | GND | P | Ground | |
6 | Rx1- | I | -LVDS Differential Data Input | |
7 | Rx0+ | I | +LVDS Differential Data Input | |
8 | GND | P | Ground | |
9 | Rx0- | I | -LVDS Differential Data Input | |
10 | RxC+ | I | +LVDS Differential Clock Input | |
11 | GND | P | Ground | |
12 | RxC- | I | -LVDS Differential Clock Input | |
13-14 | NC | - | No connection | |
15 | SCL | I/O | DDC(Data Display Channel) Clock | |
16 | SDA | I/O | DDC(Data Display Channel) Data | |
17 | GND | P | Ground | |
18 | 5V | P | Power Supply | |
19 | Detect | I/O | Hot plug detect |