N° de modèle WF101KTYAPLNG0
►Dimension 10.1 pouces
►Résolution d’écran: 1280×800 points
►Vue préférentielle IPS
►Interface : LVDS
►CI pilote:EK79202B1
►Carte de contrôle: NON
►Luminosité (Cd/m²): 300
►Cadre de maintien avec points de fixation: NON
►Dalle tactile: Avec dalle tactile capacitive (PCAP)
►Detect Point : 5 Fingers
DESSIN
SPÉCIFICATIONS
Interface
Interface Connector
Pin No. | Symbole | I/O | Function |
---|---|---|---|
1 | NC | - | No connection |
2 | VCC | P | Power Supply |
3 | VCC | P | Power Supply |
4 | NC | - | No connection |
5 | NC | - | No connection |
6 | NC | - | No connection |
7 | GND | P | Ground |
8 | Rxin0- | I | -LVDS Differential Data Input |
9 | Rxin0+ | I | +LVDS Differential Data Input |
10 | GND | P | Ground |
11 | Rxin1- | I | -LVDS Differential Data Input |
12 | Rxin1+ | I | +LVDS Differential Data Input |
13 | GND | P | Ground |
14 | Rxin2- | I | -LVDS Differential Data Input |
15 | Rxin2+ | I | +LVDS Differential Data Input |
16 | GND | P | Ground |
17 | RxCLK- | I | -LVDS Differential Clock Input |
18 | RxCLK+ | I | +LVDS Differential Clock Input |
19 | GND | P | Ground |
20 | Rxin3- | I | -LVDS Differential Data Input |
21 | Rxin3+ | I | +LVDS Differential Data Input |
22 | GND | P | Ground |
23 | NC | - | No connection |
24 | NC | - | No connection |
25 | GND | P | Ground |
26 | NC | - | No connection |
27 | NC | - | No connection |
28 | NC | - | No connection |
29 | NC | - | No connection |
30 | GND | P | Ground |
31 | LED- | P | LED Cathode |
32 | LED- | P | LED Cathode |
33 | NC | - | No connection |
34 | NC | - | No connection |
35 | VGL | P | Gate OFF Voltage |
36 | NC | - | No connection |
37 | NC | - | No connection |
38 | VGH | P | Gate ON Voltage |
39 | LED+ | P | LED Anode |
40 | LED+ | P | LED Anode |
I: input, O: output, P: Power
PCAP PIN Definition
Pin | Symbole | Function |
---|---|---|
1 | SDA | I2C data input and output |
2 | SCL | I2C clock input |
3 | RST | External Reset, Low is active |
4 | INT | External interrupt to the host |
5 | VDDT | Power Supply : +3.3V |
6 | VSS | Ground for analog circuit |
Spécifications générales
Article | Dimensions | Unité |
---|---|---|
Screen Diagonal | 10.1 | pouce |
Résolution | 1280 × 3(R GB) × 800 | points |
Dimensions du module | 257.96 × 168.6 × 5.93 | mm |
Zone active | 216.96 (H) × 135.6(V) | mm |
Pixel pitch | 0.1695 × 0.1695 | mm |
Mode d'affichage | Noir , Transmissif | |
Zone d'affichage | 80/80/80/80 | |
Pixel Arrangement | R.G.B. Vertical Stripe | |
TFT Drive IC | EK79202B1 | |
Type de rétroéclairage | LED, Blanc | |
Rapport d'aspect | 16:10 | |
TFT Interface | LVDS | |
PCAP FW Version | 80 | |
PCAP IC | GT928 | |
PCAP Interface | I2C | |
PCAP Résolution | 1280*800 | |
Avec/sans dalle tactile | Avec dalle tactile capacitive(PCAP) | |
Surface | Reflets |
Valeurs nominales maximales absolues
Article | Symbole | Min | Typ | Max | Unité |
---|---|---|---|---|---|
Température de fonctionnement | TOP | -20 | - | +70 | ℃ |
Température de stockage | TST | -30 | - | +80 | ℃ |
Caractéristiques électroniques
Article | Symbole | Valeur | Unité | ||
---|---|---|---|---|---|
Min | Typ | Max | |||
Power voltage | VCC | 3.0 | 3.3 | 3.5 | V |
VGH | 18 | V | |||
VGL | -10 | V | |||
VSP | 5.5 | V | |||
VSN | -5.5 | V | |||
Supply Voltage For Touch Logic | VDDT | 2.8 | - | 3.3 | V |