Accueil Produits Afficheur TFT TFT-LCD Support HDMI Signal WF70A2TIFGDHGV

N° de modèle WF70A2TIFGDHGV

►Dimension 7 pouces
►Résolution d’écran: 800x480 points
►Vue préférentielle 12h
►Interface: Support HDMI Connector (Only DVI Signal)
►Contrôleur IC: TFP401
►Carte de contrôle: Yes
►Luminosité (Cd/m²): 350
►Cadre de maintien avec points de fixation: NON
►Dalle tactile: Avec dalle tactile capacitive (PCAP)
►Detect Point (Fingers) : 1 / 2 / Option
►Température d’utilisation: -20~70℃

Description

WF70A2TIFGDHGV#: with a 40-pin header connector on board, supports up to Raspberry Raspberry Pi 3B+ (contain Pi 4B) version.  If customers choose Raspberry Pi 4 version, please note the interface is Micro HDMI; customers need to use the Micro HDMI to HDMI cable for Winstar this series products.
WF70A2TIFGDHG0#: without connector on board(do not support Raspberry Pi).

DESSIN

WF70A2TIFGDHGV

SPÉCIFICATIONS

Spécifications générales

Article Dimensions Unité
Dimension 7.0 pouce
Matrice de points 800 × RGB × 480(TFT) points
Dimensions du module 165.0(W) × 100(H) × 26.6(D) mm
Zone active 154.08 × 85.92 mm
Pas des points 0.0642 × 0.179 mm
Type de LCD TFT, Blanc, Transmissif
Vue préférentielle 12 o'clock
Inversion de sens de l'échelle de gris 6 o'clock
Rapport d'aspect 16:9
Contrôleur IC TFP401 ou équivalent
Type de rétroéclairage LED, Blanc
Interface Support HDMI Connector (Only DVI Signal)
PCAP IC ILI2130 ou équivalent
PCAP Interface USB
PCAP FW Version 0x07.0x00.0x00.0x00.0x65.0x90.0x00.0x01
PCAP Résolution 16384*16384
Avec/sans dalle tactile Avec dalle tactile capacitive (PCAP)
Surface Reflets

Valeurs nominales maximales absolues

Article Symbole Valeur min Valeur type Valeur max Unité
Température de fonctionnement TOP -20 +70
Température de stockage TST -30 +80

Caractéristiques électroniques

Operating conditions

Article Symbole État Valeur min Valeur type Valeur max Unité
Supply Voltage For LCM VDD 4.9 5 5.1 V
Supply Current For LCM IDD 830 1250 mA
LED Life Time 50,000 Hr

Interface

1. LCM PIN Definition(CON6)

Pin Symbole Function Remark
1 NC No connection  
2 5V Raspberry Pi:Power 5V  
3 GPIO02 Raspberry Pi:GPIO02  
4 5V Raspberry Pi:Power 5V  
5 GPIO03 Raspberry Pi:GPIO03  
6 GND Raspberry Pi:GND  
7 GPIO04 Raspberry Pi:GPIO04  
8 GPIO14 Raspberry Pi:GPIO14  
9 GND Raspberry Pi:GND  
10 GPIO15 Raspberry Pi:GPIO15  
11 GPIO17 Raspberry Pi:GPIO17  
12 GPIO18 Raspberry Pi:GPIO18 (Backlight Enable)  
13 GPIO27 Raspberry Pi:GPIO27  
14 GND Raspberry Pi:GND  
15 GPIO22 Raspberry Pi:GPIO22  
16 GPIO23 Raspberry Pi:GPIO23  
17 NC No connection  
18 GPIO24 Raspberry Pi:GPIO24  
19 GPIO10 Raspberry Pi:GPIO10  
20 GND Raspberry Pi:GND  
21 GPIO09 Raspberry Pi:GPIO09  
22 GPIO25 Raspberry Pi:GPIO25  
23 GPIO11 Raspberry Pi:GPIO11  
24 GPIO08 Raspberry Pi:GPIO08  
25 GND Raspberry Pi:GND  
26 GPIO07 Raspberry Pi:GPIO07  
27 ID_SD Raspberry Pi:ID_SD  
28 ID_SC Raspberry Pi:ID_SC  
29 GPIO05 Raspberry Pi:GPIO05  
30 GND Raspberry Pi:GND  
31 GPIO06 Raspberry Pi:GPIO06  
32 GPIO12 Raspberry Pi:GPIO12  
33 GPIO13 Raspberry Pi:GPIO13  
34 GND Raspberry Pi:GND  
35 GPIO19 Raspberry Pi:GPIO19  
36 GPIO16 Raspberry Pi:GPIO16  
37 GPIO26 Raspberry Pi:GPIO26  
38 GPIO20 Raspberry Pi:GPIO20  
39 GND Raspberry Pi:GND  
40 GPIO21 Raspberry Pi:GPIO21  
 

2.LCM PIN Definition (CON5)

Pin Symbole Function Remark
1 3.3V TFT Module Power limit can only output 3.3V,100mA Note1
2 5V Raspberry Pi:Power 5V  
3 GPIO02 Raspberry Pi:GPIO02  
4 5V Raspberry Pi:Power 5V  
5 GPIO03 Raspberry Pi:GPIO03  
6 GND Raspberry Pi:GND  
7 GPIO04 Raspberry Pi:GPIO04  
8 GPIO14 Raspberry Pi:GPIO14  
9 GND Raspberry Pi:GND  
10 GPIO15 Raspberry Pi:GPIO15  
11 GPIO17 Raspberry Pi:GPIO17  
12 GPIO18 Raspberry Pi:GPIO18 (Backlight Enable)  
13 GPIO27 Raspberry Pi:GPIO27  
14 GND Raspberry Pi:GND  
15 GPIO22 Raspberry Pi:GPIO22  
16 GPIO23 Raspberry Pi:GPIO23  
17 3.3V TFT Module Power limit can only output 3.3V,100mA Note1
18 GPIO24 Raspberry Pi:GPIO24  
19 GPIO10 Raspberry Pi:GPIO10  
20 GND Raspberry Pi:GND  
21 GPIO09 Raspberry Pi:GPIO09  
22 GPIO25 Raspberry Pi:GPIO25  
23 GPIO11 Raspberry Pi:GPIO11  
24 GPIO08 Raspberry Pi:GPIO08  
25 GND Raspberry Pi:GND  
26 GPIO07 Raspberry Pi:GPIO07  
27 ID_SD Raspberry Pi:ID_SD  
28 ID_SC Raspberry Pi:ID_SC  
29 GPIO05 Raspberry Pi:GPIO05  
30 GND Raspberry Pi:GND  
31 GPIO06 Raspberry Pi:GPIO06  
32 GPIO12 Raspberry Pi:GPIO12  
33 GPIO13 Raspberry Pi:GPIO13  
34 GND Raspberry Pi:GND  
35 GPIO19 Raspberry Pi:GPIO19  
36 GPIO16 Raspberry Pi:GPIO16  
37 GPIO26 Raspberry Pi:GPIO26  
38 GPIO20 Raspberry Pi:GPIO20  
39 GND Raspberry Pi:GND  
40 GPIO21 Raspberry Pi:GPIO21  
Note1: The 3.3V supply current is limited; please pay special attention to use  

3. DVI

Pin No. Symbole I/O Function Remark
1 Rx2+ I +LVDS Differential Data Input  
2 GND P Ground  
3 Rx2- I -LVDS Differential Data Input  
4 Rx1+ I +LVDS Differential Data Input  
5 GND P Ground  
6 Rx1- I -LVDS Differential Data Input  
7 Rx0+ I +LVDS Differential Data Input  
8 GND P Ground  
9 Rx0- I -LVDS Differential Data Input  
10 RxC+ I +LVDS Differential Clock Input  
11 GND P Ground  
12 RxC- I -LVDS Differential Clock Input  
13-14 NC - No connection  
15 SCL I/O DDC(Data Display Channel) Clock  
16 SDA I/O DDC(Data Display Channel) Data  
17 GND P Ground  
18 5V P Power Supply  
19 Detect I/O Hot plug detect  
I: input, O: output, P: Power

4.USB

Pin No. Symbole I/O Function Remark
1 5V P Power Supply  
2 D- I/O USB Data -  
3 D+ I/O USB Data +  
4 NC - No connection  
5 GND P Ground  
 

5.POWER JACK

Pin No. Symbole I/O Function Remark
1 5V P Power Supply (5V)  
2 GND P Ground  
3 NC   No connection  
*Display need to use power jack to power on due to HDMI port not able to fulfill the supply current
go top
close