2 Zoll 240x320 PCAP TFT Bildschirm
Modellnummer WF0200BTYAJDNG0
►Größe: 2 Zoll
►Auflösung: 240 x 320 Punkten
►Betrachtungsrichtung: IPS
►Schnittstelle: MCU, SPI
►Treiber IC:ST7789VI
►Steuerplatine: Nein
►Helligkeit (cd/m²):450
►Durchsteckrahmen: Nein
►Touchscreen: Projiziert Kapazitiver Touchscreen (PCAP)
►Berührungspunkte: 1 Finger
Beschreibung
WF0200BTYAJDNG0 ist ein 2-Zoll-IPS-TFT-LCD-Modul mit einem kapazitiven projizierten Touchscreen (PCAP). Dieses TFT-LCD-Modul, das mit dem ST7789VI-Treiber-IC ausgestattet ist, unterstützt MCU- und SPI-Schnittstellen mit einer Auflösung von 240 × 320 Pixel. WF0200BTYAJDNG0 zeichnet sich durch ein IPS-Panel aus, das den Vorteil eines breiteren Betrachtungswinkels bietet: Links: 80 / Rechts: 80 / Oben: 80 / Unten: 80 Grad, einer Helligkeit von 450 Nits (typischer Wert) und einem Seitenverhältnis von 3:4 (typischer Wert). Der projizierte kapazitive Touchscreen von WF0200BTYAJDNG0 ist mit dem IC GT911 ausgestattet, der die I2C-Schnittstelle und einen einzelnen Detektionspunkt unterstützt.
Die Versorgungsspannung für analog liegt zwischen 2,4V und 3,6V (der typische Wert beträgt 3,3V). Dieses Modul kann bei Temperaturen von -20°C bis +70°C betrieben werden, und die Lagertemperaturen liegen zwischen -30°C und +70°C. Der 2-Zoll-TFT-LCD-Display im Hochformat eignet sich für eine Vielzahl von elektronischen Geräten, darunter Messgeräte wie Laserentfernungsmesser und Luftqualitätsdetektoren, sowie Testgeräte, Sportuhren und andere kompakte elektronische Geräte.
Zeichnung
Technische Daten
Schnittstelle
LCM PIN Definition
NO | Symbol | Funktion | |||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
1 | GND | Ground | |||||||||||||||||||||||||||||||||||
2 | NC(YU) | No connection | |||||||||||||||||||||||||||||||||||
3 | NC(XL) | No connection | |||||||||||||||||||||||||||||||||||
4 | NC(YD) | No connection | |||||||||||||||||||||||||||||||||||
5 | NC(XR) | No connection | |||||||||||||||||||||||||||||||||||
6 | NC | No connection | |||||||||||||||||||||||||||||||||||
7 | VDD | Power supply | |||||||||||||||||||||||||||||||||||
8 | VDDI | Power Supply for I/O System. | |||||||||||||||||||||||||||||||||||
9 | TE | Tearing effect signal is used to synchronize MCU to frame memory writing. If not used, please let this pin open |
|||||||||||||||||||||||||||||||||||
10 | CSX | Chip selection pin Low enable. High disable. |
|||||||||||||||||||||||||||||||||||
11 | DCX(SCL) | (D/CX): This pin is used to select "Data or Command" in the parallel interface. DCX='1': display data or parameter. DCX='0': command data. (SCL): When SPI mode,This pin is used to be serial interface clock. |
|||||||||||||||||||||||||||||||||||
12 | WRX(D/CX) | Display data/command selection Second Data lane in 2 data lane serial interface. (WRX): Write enable in MCU parallel interface. (D/CX): When 4-SPI mode,This pin in 4-line serial interface If not used, please fix this pin at VDDI or GND. |
|||||||||||||||||||||||||||||||||||
13 | RDX | -Read enable in 8080 MCU parallel interface. -If not used, please fix this pin at VDDI or GND. |
|||||||||||||||||||||||||||||||||||
14~29 | DB0~DB15 | Data bus line | |||||||||||||||||||||||||||||||||||
30 | RESX | System reset pin. signal is active low |
|||||||||||||||||||||||||||||||||||
31 | IM0 | The MCU interface mode select.
|
|||||||||||||||||||||||||||||||||||
32 | IM1 | ||||||||||||||||||||||||||||||||||||
33 | IM2 | ||||||||||||||||||||||||||||||||||||
34~35 | DB16~DB17 | Data bus line | |||||||||||||||||||||||||||||||||||
36 | VLED- | Cathode of LED backlight. | |||||||||||||||||||||||||||||||||||
37 | VLED- | Cathode of LED backlight. | |||||||||||||||||||||||||||||||||||
38 | VLED+ | Anode of LED backlight. | |||||||||||||||||||||||||||||||||||
39 | NC(SDA) | When SPI mode, This pin is SPI interface input/output pin. The data is latched on the rising edge of the SCL signal. If not used(NC), please fix this pin at VDDI or GND level. |
|||||||||||||||||||||||||||||||||||
40 | NC | No connection |
PCAP PIN Definition
Pin | Symbol | Funktion |
---|---|---|
1 | VSS | Ground for analog circuit |
2 | VDDT | Power Supply : |
3 | SCL | I2C clock inputI2C clock input |
4 | NC | No connect |
5 | SDA | I2C data input and output |
6 | NC | No connect |
7 | /RST | External Reset, Low is active |
8 | NC | No connect |
9 | /INT | External interrupt to the host |
10 | VSS | Ground for analog circuit |
Allgemeine Spezifikationen
Artikel | Ausmaß | Einheit |
---|---|---|
Größe | 2 | Zoll |
Punktmatrix | 240 x RGB x 320(TFT) | dots |
Abmaße der modul | 38.4(W) x 51.9(H) x3.98(D) | mm |
Aktiver Bereich | 30,60 x 40,80 | mm |
Pixelabstand | 0.1275 x 0.1275 | mm |
LCD-Typ | TFT, Schwarz, Transmissiv | |
TFT Schnittstelle | MCU / SPI | |
TFT Treiber IC | ST7789VI oder gleichwertig | |
Betrachtungsrichtung | 80/80/80/80 (IPS) | |
Seitenverhältnis | 3:4 | |
Backlight-Typ | LED, Weiß | |
PCAP Treiber IC | GT911 oder gleichwertig | |
PCAP Schnittstelle | I2C | |
FW Version | 92 | |
PCAP Auflösung | 240 * 320 | |
Touchscreen | Kapazitiv Touchscreen (PCAP) | |
Oberfläche | Glanz |
absolute Grenzwerte
Artikel | Symbol | Mindestwert | typischer Wert | Maximalwert | Einheit |
---|---|---|---|---|---|
Betriebstemperatur | TOP | -20 | - | +70 | ℃ |
Lagertemperatur | TST | -30 | - | +80 | ℃ |
elektrische Eigenschaften
Operating conditions:
Artikel | Symbol | Condition | Mindestwert | typischer Wert | Maximalwert | Einheit |
---|---|---|---|---|---|---|
Supply Voltage For Analog | VDD | - | 2,4 | 3,3 | 3,6 | V |
Interface Operation Voltage | VDDI | - | 1,65 | 1,8 | 3,6 | V |
Supply Current For LCM | IDD | VDD = VDDI = VCC=3.0V |
- | 6,0 | 9,0 | mA |
Supply PCAP | VPCAP | - | 2,8 | - | 3,3 | V |
IPCAP | - | - | 8,0 | 12,0 | mA |
LED driving conditions:
Parameter | Symbol | Mindestwert | typischer Wert | Maximalwert | Einheit |
---|---|---|---|---|---|
LED-Strom | - | - | 60 | - | mA |
LED-Spannung | VLED+ | 2.7 | 3.1 | 3.4 | V |
LED-Lebensdauer | - | - | 50,000 | - | Hr |