Startseite Produkte TFT-LCDs Bar-Typ TFT Farbdisplay WF39QTIBSDBG0

3.9 Zoll 480x128 Kapazitiv Touchscreen TFT LCD

Modellnummer WF39QTIBSDBG0

►Größe: 3,9 Zoll
►Auflösung: 480x128 Punkten
►Betrachtungsrichtung: 12H
►Schnittstelle: MCU
►Treiber IC : SSD1963
►Steuerplatine: Yes
►Helligkeit (cd/m²): 400
►Durchsteckrahmen: Yes
►Touchscreen: Kapazitiv Touchscreen (PCAP)
►Detect Point : 5 Fingers

Zeichnung

Capacitive Touch Display, Touch Panel Display - Winstar Touch Display- WF39QTIBSDBG0

Technische Daten

Schnittstelle Pin-Funktion

LCM PIN Definition

Pin Symbol Funktion
1 GND System round pin of the IC. Connect to system ground.
2 VDD Power Supply : +3.3V
3 BL_E Backlight control signal , H: On \ L: Off
4 D/C Data/Command select
5 WR Write strobe signal
6 RD Read strobe signal
7 DB0 Data bus
8 DB1 Data bus
9 DB2 Data bus
10 DB3 Data bus
11 DB4 Data bus
12 DB5 Data bus
13 DB6 Data bus
14 DB7 Data bus
15 DB8 Data bus (When select 8bits mode, this pin is NC)
16 DB9 Data bus (When select 8bits mode, this pin is NC)
17 DB10 Data bus (When select 8bits mode, this pin is NC)
18 DB11 Data bus (When select 8bits mode, this pin is NC)
19 DB12 Data bus (When select 8bits mode, this pin is NC)
20 DB13 Data bus (When select 8bits mode, this pin is NC)
21 DB14 Data bus (When select 8bits mode, this pin is NC)
22 DB15 Data bus (When select 8bits mode, this pin is NC)
23 NC No connect
24 NC No connect
25 CS Chip select
26 RESET Hardware reset
27 DISP_ON Display on/off control
28 NC No connect
29 NC No connect
30 NC No connect
31 NC No connect
32 NC No connect
33 VLED- VLED- for B/L LED inverter (GND)
34 VLED- VLED- for B/L LED inverter (GND)
35 VLED+ VLED+ for B/L LED inverter (+5V)
36 VLED+ VLED+ for B/L LED inverter (+5V)

PCAP PIN Definition

Pin Symbol Funktion
1 VSS Ground for analog circuit
2 VDDT Power Supply : +3.0V
3 SCL I2C clock inputI2C clock input
4 NC No connect
5 SDA I2C data input and output
6 NC No connect
7 /RST External Reset, Low is active
8 NC No connect
9 /INT External interrupt to the host
10 VSS Ground for analog circuit

Allgemeine Spezifikationen

Artikel Ausmaß Einheit
Größe (Diagonale) 3,9 Zoll
Punktmatrix (Auflösung) 480 × 128 × RGB (TFT) dots
Abmaße der modul 122,0 × 44,0 × 9,8(max) mm
Aktiver Bereich 95,04 × 25,34 mm
Punktabstand 0,066(W) × 0,198(H) mm
LCD-Typ TFT, Weiß, Transmissiv
Betrachtungsrichtung 12o'clock
Graustufen-Inversionsrichtung 6 o'clock
Seitenverhältnis Bar Type
Treiber IC SSD1963
TFT Schnittstelle Digital 8080 family MPU 8bit/16bit
PCAP IC CYTMA568 Or Equal
PCAP FW Version TBD
Backlight-Typ LED, Weiß
Color arrangement RGB-STRIPE
Touchscreen projiziert kapazitives Touch-Panel (PCAP)
Oberfläche Glanz

absolute Grenzwerte

Artikel Symbol Mindestwert typischer Wert Maximalwert Einheit
Betriebstemperatur TOP -20 +70
Lagertemperatur TST -30 +80

elektronische Eingenschaften

Operating conditions: (CON3.Pin1=GND, Pin2=VDD)

Artikel Symbol Mindestwert typischer Wert Maximalwert Einheit
Supply Voltage For LCM VDD 3,0 3,1 3,3 V
Supply Current For LCM IDD 200 mA
Supply Voltage For CTP VDDT 2,8 3,3 V
Supply Current For CTP IDDT 35 mA
go top
close