128x64 OLED-Modul 2.42 Zoll - WEP012864AJ

128x64 OLED-Modul 2.42 Zoll

Modellnummer WEP012864AJ(8080)

►Typ: Grafik
►Bauweise: COG + Frame + PCB
►Größe: 2,42 Zoll
►128 x 64 Punktmatrix
►IC：CH1116
►3-V-Stromversorgung
►1/64 duty
►Schnittstelle: 8080
►die Farbe des Displays: Weiß / Gelb

PDF-Download

Democode Zu Anfrage hinzufügen

Zurück Zurück zur Liste Weiter

Zeichnung

Winstar Display - 2.42 inch Graphic OLED 128x64 Display - WEP012864AJ-8080

Data source ref：WEP012864AJLPP3N00000

Technische Daten

mechanische Daten

Artikel	Ausmaß	Einheit
Punktmatrix	128 x 64	-
Abmaße der modul	75.0 × 52.7 × 8.5(Max).	mm
Aktiver Bereich	55.01 × 27.49	mm
Punktgröße	0.40 × 0.40	mm
Punktabstand	0.43 × 0.43	mm
der Anzeigemodus	Passive Matrix
Display Color	Monochrome
Drive Duty	1/64 Duty
IC	CH1116
Schnittstelle	8080
Punktgröße	2.42 Zoll

Absolute Grenzwerte

Parameter	Symbol	Mindestwert	Maximalwert	Einheit
Versorgungsspannung für Logik	VDD	-0.3	3.6	V
Betriebstemperatur	TOP	-40	+80	°C
Lagertemperatur	TSTG	-40	+85	°C

elektronische Eingenschaften

Artikel	Symbol	Condition	Mindestwert	typischer Wert	Maximalwert	Einheit
Versorgungsspannung für Logik	VDD	-	2.8	3.0	3.3	V
High-Level-Eingang	VIH	-	0.8×VDD	-	VDD	V
Low-Level-Eingang	VIL	-	VSS	-	0.2×VDD	V
High-Level-Ausgang	VOH	-	0.8×VDD	-	VDD	V
Low-Level-Ausgang	VOL	-	VSS	-	0.2×VDD	V
Anzeige 50 % Pixel an	IDD	VDD =3.0V	-	60	120	mA

Schnittstelle Pin-Funktion

No.	Symbol	Beschreibung
1	VDD	Power supply input
2	VSS	Ground.
3	NC	No connection
4~11	D0~D7	This is an 8-bit bi-directional data bus that connects to an 8-bit or 16-bit standard MPU data bus.
12	CS#	This pad is the chip select input. When="L", then the chip select becomes active, and data/command I/O is enabled.
13	NC	No Connection
14	RES#	This is a reset signal input pad. When is set to "L", the settings are initialized. The reset operation is performed by the signal level.
15	W/R#	This is a MPU interface input pad. When connected to an 8080 MPU, this is active LOW. This pad connects to the 8080 MPU signal. The signals on the data bus are latched at the rising edge of the signal.
16	A0	This is the Data/Command control pad that determines whether the data bits are data or a command. A0="H": the inputs at D0 to D7 are treated as display data. A0="L": the inputs at D0 to D7 are transferred to the command registers.
17	R/D#	This is a MPU interface input pad. When connected to an 8080 series MPU, it is active LOW. This pad is connected to the signal of the 8080 series MPU, and the data bus is in an output status when this signal is "L".
18	NC	No Connection
19	DISP	Display off when it's pulled low; Display on when it's pulled high.
20	NC	No connection