LCD Matrix Display 128x64
Modellnummer WO12864B
►128x64 LCD Matrix Display
►COG LCD
►LCD Grafik
►IC: ST7565P
►3,3-V-Stromversorgung
►1/65 duty cycle
►WO12864B1 : Dicke 6,0 mm
►Schnittstelle : 6800/8080/SPI
Beschreibung
There are two versions for WO12864B series, which is different on thickness as below:
►WO12864B : thickness 12.1mm (Max)
►WO12864B1 : thickness 6.0mm
►WO12864B : thickness 12.1mm (Max)
►WO12864B1 : thickness 6.0mm
Zeichnung
Data source ref:WO12864B-TFH#
Technische Daten
Schnittstelle Pin-Funktion
Pin No. | Symbol | Level | Beschreibung | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
1 | /CS1B | I | This is the chip select signal. | |||||||||||||||
2 | /RES | I | When RES is set to “L”, the setting are initialized. | |||||||||||||||
3 | A0 | I | This is connect to the least significant bit of the normal MPU address bus, and it determines whether the data bits are data or command. A0 = “H”: Indicates that D0 to D7 are display data. A0 = “L”: Indicates that D0 to D7 are control data. |
|||||||||||||||
4 | /WR(R/W) | I | • When connected to 8080 series MPU, this pin is treated as the “/WR” signal of the 8080 MPU and is LOW-active. The signals on the data bus are latched at the rising edge of the /WR signal. • When connected to 6800 series MPU, this pin is treated as the “R/W” signal of the 6800 MPU and decides the access type : When R/W = “H”: Read. When R/W = “L”: Write. |
|||||||||||||||
5 | /RD(E) | I |
• When connected to 8080 series MPU, this pin is treated as the “/RD” signal of the 8080 MPU and is LOW-active. |
|||||||||||||||
6~13 | D0~D7 | I/O | Data bus line | |||||||||||||||
14 | VDD | Power supply | Power supply | |||||||||||||||
15 | VSS | Power supply | Ground | |||||||||||||||
16 | VOUT | O | DC/DC voltage converter. Connect a capacitor between this terminal and vss or VDD | |||||||||||||||
17 | CAP3P | O | DC/DC voltage converter. Connect a capacitor between this terminal and the CAP1N terminal. | |||||||||||||||
18 | CAP1N | O | DC/DC voltage converter. Connect a capacitor between this terminal and the CAP1P terminal. | |||||||||||||||
19 | CAP1P | O | DC/DC voltage converter. Connect a capacitor between this terminal and the CAP1N terminal. | |||||||||||||||
20 | CAP2P | O | DC/DC voltage converter. Connect a capacitor between this terminal and the CAP2N terminal. | |||||||||||||||
21 | CAP2N | O | DC/DC voltage converter. Connect a capacitor between this terminal and the CAP2P terminal. | |||||||||||||||
22~26 | V4~V0 | Power supply | This is a multi-level power supply for the liquid crystal drive. | |||||||||||||||
27 | VR | I | Output voltage regulator terminal. Provides the voltage between VSS and V0 through a resistive voltage divider. | |||||||||||||||
28 | C86 | I | This is the MPU interface selection pin. C86 = “H”: 6800 Series MPU interface. C86 = “L”: 8080 Series MPU interface |
|||||||||||||||
29 | P/S | I | This is the parallel data input/serial data input switch terminal. P/S = “H”: Parallel data input. P/S = “L”: Serial data input. The following applies depending on the P/S status:
/RD (E) and /WR (R/W) are fixed to either “H” or “L”. With serial data input, It is impossible read data from RAM |
|||||||||||||||
30 | NC | - | No connection. |
mechanische Daten
Artikel | Ausmaß | Einheit |
---|---|---|
Number of Dots | 128 x 64 | - |
Module Ausmaß | 89,7 x 49,8 x 11,8 | mm |
Anzeigebereich | 69,0 x 36,5 | mm |
Active area | 63,97 x 31,97 | mm |
Dot size | 0,47 x 0,47 | mm |
Dot pitch | 0,5 x 0,5 | mm |
Duty | 1/65 , 1/9 Bias | |
Backlight-Typ | LED | |
IC | ST7565P | |
Schnittstelle | 6800/8080/4-Line SPI |
Absolute Maximalwertimum Ratings
Artikel | Symbol | Mindestwert | typischer Wert | Maximalwert | Einheit |
---|---|---|---|---|---|
Betriebstemperatur | TOP | -20 | - | +70 | ℃ |
Lagertemperatur | TST | -30 | - | +80 | ℃ |
Power Supply Voltage | VDD | -0,3 | - | 3,6 | V |
Power supply voltage (VDD standard) | V0,VOUT | -0,3 | - | 14,5 | V |
Power supply voltage (VDD standard) | V1,V2,V3,V4 | -0,3 | - | V0+0,3 | V |
Elektrische Eigenschaften
Artikel | Symbol | Bedingung | Mindestwert | typischer Wert | Maximalwert | Einheit |
---|---|---|---|---|---|---|
Supply Voltage For Logic | VDD-VSS | - | 2,7 | - | 3,3 | V |
Supply Voltage For LCM | V0-VSS | Ta=-20℃ Ta=25℃ Ta=70℃ |
9,5 9,2 8,95 |
9,8 9,45 9,2 |
10,5 9,8 9,45 |
V V V |
Input High Volt. | VIH | - | 0.8 VDD | - | VDD | V |
Input Low Volt. | VIL | - | VSS | - | 0,2VDD | V |
Output High Volt. | VOH | IOUT=-0.5mA | 0,8VDD | - | VDD | V |
Output Low Volt. | VOL | IOUT=0.5mA | VSS | - | 0,2VDD | V |
Supply Current(No include LED Backlight) | IDD | - | - | 0,6 | 2,0 | mA |
Search Keyword: lcd 128x64, lcd 128 x 64, 128x64 lcd, 128 x 64 lcd