产品叙述
WF101JSYJHLNB0是一款10.1寸采用IPS技术且搭载投射式电容式触控屏幕(PCAP)显示器,模块分辨率为1024x 600像素,此款模块具有宽视角优势,其视角为:左85/右85/上85/下85度,对比度800:1(典型值),亮度900 nits(典型值),眩光玻璃,长宽比为16:9。 此模块内建使用ILI2511 IC,同时支持I2C与USB接口;工作温度范围-20℃至+70℃,储存温度范围为-30℃至+80℃。
规格图
产品规格
Pin功能定义
TFT LCD Module
Pin No. | 符号 | 功能说明 |
---|---|---|
1-3 | DC12V | Digital power |
4 | NC | No connection |
5-8 | GND | Digital ground |
8 | Rxin0- | Negative LVDS differential data inputs |
9 | Rxin0+ | Positive LVDS differential data inputs |
10 | GND | Digital ground |
11 | Rxin1- | Negative LVDS differential data inputs |
12 | Rxin1+ | Positive LVDS differential data inputs |
13 | GND | Digital ground |
14 | Rxin2- | Negative LVDS differential data inputs |
15 | Rxin2+ | Positive LVDS differential data inputs |
16 | GND | Digital ground |
17 | RxCLK- | Negative LVDS differential clock inputs |
18 | RxCLK+ | Positive LVDS differential clock inputs |
19 | GND | Digital ground |
20 | Rxin3- | Negative LVDS differential data inputs |
21 | Rxin3+ | Positive LVDS differential data inputs |
22 | GND | Digital ground |
23 | LED_PWM | Backlight control signal |
24 | USB_DC5V | Power supply for PCAP (USB type) |
25 | DC3V | Power supply for PCAP (I2C Type) |
26 | USB_D+ | Data + (PCAP) |
27 | GND | Digital ground |
28 | SDA | I2C data input and output (PCAP) |
29 | SCL | I2C clock input (PCAP) |
30 | INT | External interrupt to the host (PCAP) |
31 | RST | External Reset, Low is active (PCAP) |
32 | GND | Digital ground |
33 | USB_D- | Data - (PCAP) |
34-43 | NC | No connection |
44-46 | GND | Digital ground |
47 | NC | No connection |
48-50 | DC12V | Digital power |
规格说明
项目 | 规格 | 单位 |
---|---|---|
显示尺寸(对角线) | 10.1 | 寸 |
点阵(分辨率) | 1024 RGB x 600 | dots |
模块尺寸 | 235(W) x 143(H) x 22.43(D) | mm |
可视区域 | 222.72 (H) x 125.28(V) | mm |
点间距 | 0.2175(W) x 0.2088(H) | mm |
LCD类型 | TFT 全透 | |
接口 | LVDS | |
驱动IC | EK79001HN + EK73215BCGA or Equivalent | |
视角 | 85/85/85/85 | |
长宽比 | 16:9 | |
背光类型 | LED, Normally White | |
PCAP IC | ILI2511 或相容IC | |
PCAP 接口 | USB (I2C可用) | |
PCAP FW 版本 | V6.0.0.0.62.90.1.2 | |
触控面板类型 | 投射电容式触控面板 (PCAP) | |
表面 | 亮面 |
最大绝对额定值
项目 | 符号 | 最小值 | 典型值 | 最大值 | 单位 |
---|---|---|---|---|---|
工作温度 | TOP | -20 | - | +70 | ℃ |
储存温度 | TST | -30 | - | +80 | ℃ |
电气特性
1.典型操作条件 (At Ta = 25 °C)
项目 | 符号 | 最小值 | 典型值 | 最大值 | 单位 |
---|---|---|---|---|---|
LCM供电电压+12V | DC12V | - | 12.0 | - | V |
LCM供电电流+12V | IDC12V | - | 650 | 980 | mA |
PCAP(I2C) 电源电压 | DC3V | 3.15 | 3.3 | 3.45 | V |
PCAP (I2C) 的电源电流 | IDC3V | - | 80 | 120 | mA |
PCAP电源电压 | USB_DC 5V | 4.75 | 5.0 | 5.25 | V |
IUSB_DC 5V | - | 100 | 100 | mA |
2. 背光驱动条件
范围 | 符号 | 最小值 | 典型值 | 最大值 | 单位 |
---|---|---|---|---|---|
PWM 控制电平 (LED_PWM) | High Level | - | 3.3 | - | V |
Low Level | - | 0 | - | V | |
PWM控制占空比 | - | 1 | - | 100 | % |
PWM控制频率 | - | - | 10K | - | Hz |
LED使用寿命 | - | 50,000 | - | - | Hr |