| Pin No. |
記号 |
説明 |
| 1 |
GND |
System ground pin of the IC . Connect to system ground. |
| 2 |
VDD |
Power Supply : +3.3V |
| 3 |
NC |
No connect |
| 4 |
RS |
Data/Command select |
| 5 |
WR |
Write strobe signal |
| 6 |
RD |
Read strobe signal |
| 7~14 |
DB0~DB7 |
Data bus |
| 15~22 |
DB8~DB15 |
Data bus (When select 8bits Mode, this pin is NC) |
| 23 |
WAIT |
Wait Signal Output(H:active) |
| 24 |
CTP_INT |
CTP_ External interrupt to the host |
| 25 |
CS |
Chip select |
| 26 |
RST |
Hardware reset |
| 27 |
L/R |
Left / right selection; Default L/R=H |
| 28 |
U/D |
Up/down selection; ; Default U/D=L |
| 29 |
CTP_SCL |
I2C clock input |
| 30 |
CTP_SDA |
I2C data input and output |
| 31 |
CTP_RST |
CTP_ External Reset, Low is active |
| 32 |
NC |
No connection |
| 33~34 |
VLED- |
Power for LED Driver IC(GND) |
| 35~36 |
VLED+ |
Power for LED Driver IC(+5V) |
