Pantalla TFT táctil resistivo 10.2" con control de LCD
Modelo Nº WF102QTIFGDBT0
►Tamaño : 10.2 pulgada
►Resolución : 800 x 480 pontos
►Dirección de la vista : 12H
►Interfa : MCU
►Controlador IC:SSD1963
►Placa de control : Yes
►Brillo (cd/m2) : 250
►Agujero del bastidor : No
►Pantalla táctil : Con panel táctil resistivo (RTP)
DIBUJO
ESPECIFICACIONES
Función interfaz Pin
Pin | Símbolo | Función |
---|---|---|
1 | GND | System ground pin of the IC . Connect to system ground. |
2 | VDD | Power Supply : +3.3V |
3 | BLE | Backlight control signal , H: On \ L: Off |
4 | D/C | Data/Command select |
5 | WR | Write strobe signal |
6 | RD | Read strobe signal |
7~14 | DB0~DB7 | Data bus |
15~22 | DB8~DB15 | Data bus (When select 8bits Mode, this pin is NC) |
23~24 | NC | No connect |
25 | CS | Chip select |
26 | RST | Hardware reset |
27 | L/R | Left / right selection; Default L/R=H |
28 | U/D | Up/down selection; ; Default U/D=L |
29 | XL | Left electrode |
30 | YU | Top electrode |
31 | XR | Right electrode |
32 | YD | Bottom electrode |
33~34 | VLED- | Power for LED Driver IC(GND) |
35~36 | VLED+ | Power for LED Driver IC(+5V) |
Especificaciones generales
Elemento | Dimensión | Unidad |
---|---|---|
Tamaño | 10.2 | pulgada |
Matriz de puntos | 800 × RGB × 480 | dots |
Dimensión del módulo | 235.0(H) × 145.8(V) × 12.4(D) | mm |
zona activa | 222.0(W) × 132.48(H) | mm |
Distancia entre puntos | 0.0925(W) × 0.276(H) | mm |
Tipo de LCD | TFT, Blanco, Transmisivo | |
Dirección de la vista | 12 o'clock | |
Dirección de inversión de escala de grises | 6 o'clock | |
Tipo de retroiluminación | LED, Blanco | |
IC de Controlador | SSD1963 | |
Interfaz | Digital 8080 family MPU 8bit/16bit | |
Con o sin panel táctil | Con panel táctil resistivo (RTP) | |
Superficie | Pantalla antirreflectante |
Valores nominales máximos absolutos
Elemento | Símbolo | Valor mín. | Valor típico | Valor máx. | Unidad |
---|---|---|---|---|---|
Temperatura de funcionamiento | TOP | -20 | - | +70 | ℃ |
Temperatura de almacenamiento | TST | -30 | - | +80 | ℃ |
Características electrónicas
Elemento | Símbolo | Condición | Valor mín. | Valor típico | Valor máx | Unidad |
---|---|---|---|---|---|---|
Supply Voltage For LCM | VDD | - | 3.0 | 3.1 | 3.3 | V |
Supply Current For LCM | IDD | - | - | 160 | 225 | mA |