Issue No. 140
- 1) WEP012832A 2.23" 128x32 Capacitive Touch Screen OLED
- 2) 7" 800x480 PCPA TFT Module WF70B2SIAGDNG0
- 3) 7" 1024x600 IPS TFT M Series WF70MTABHLRN0
- 4) Comparison: Functions of WF70MTABHLRN0
- 5) More Functions of WF70MTABHLRN0
WEP012832A model has extension item with Capacitive Touch Panel on module; it's 2.23" diagonal size, made of 128x32 dot matrix. This OLED module is built-in with SSD1305 IC; it supports 6800/8080 8-bit parallel, I2C, and 4-Wire SPI interface, supply voltage for logic 3.3V, the display with 50% Check board current is 85mA @3.3VDD (typical value), driving duty 1/32, supply voltage for logic 3.0V~5.0V (VDD). This model is having Capacitive Touch Panel on module; it is built-in with FT6336U IC which supports I2C interface, detect point on 1 finger, normal glare surface glass.
WEP012832A-CTP model is a COG OLED display with a PCB on module. There are two methods for options to fix modules on customers’ applications; one is using mounting holes to fix the modules, the other one is using metal pins on PCB board. Furthermore, we provide three options of interface connection for customers to choose, hot bar soldering, metal pins or FPC with connector. We also provide a mini vibration motor and buzzer optional as well.
This OLED module is suitable for smart home application, medical device, smart control, etc. WEP012832A-CTP module can be operating at temperatures from -20℃ to +70℃; its storage temperatures range from -40℃ to +85℃.
WF70B2SIAGDNG0 is a 7 inch TFT LCD module with Projected Capacitive Touch Panel, resolution 800x480 pixels. WF70B2SIAGDNG0 model is built-in with HX8264-E and HX8664-B driver ICs, it supports 24 bit RGB interface, featured with DC to DCfunction; contrast ratio 800:1 (typical value), brightness 700 nits (typical value), aspect ratio 16:9, normally white, transmissive LCD type, view direction 12H, gray scale inversion direction 6H. The Projected Capacitive Touch Panel of WF70B2 is built-in with FT5426 IC which supports I2C interface. WF70B2 series is compatible with WF70Y series but featured with different driver ICs, it is a new 7” TFT option for customers to choose.
The supply voltage for logic (VCC) of WF70B2SIAGDNG0 is from 3.0V to 3.6V, typical value 3.3V. It can be operating at temperatures from -20℃ to +70℃ and storage temperatures from -30℃ to +80℃.
WF70MTABHLRN0 is a 7 inch IPS M Series TFT-LCD display, made of resolution 1024x600 pixels. The M Series TFT is an "all in one system" which supports two kinds of user interfaces; the UART and SPI interface. WF70MTABHLRN0 module is featured with IPS panel which is having the advantage of wider viewing angle of Left:85 / Right:85 / Up:85 / Down:85 degree (typical), contrast ratio 800:1 (typical value), high brightness 600 nits (typical value), anti-glare surface panel, aspect Ratio 16:9. The power voltage of LCM is 5V (1.5A at least). It can be operating at temperatures from -10℃ to +70℃ and storage temperatures from -30℃ to +80℃. This 7" IPS M series have Resistive Touch Panel and Projected Capacitive Touch Panel for options.
WF70MTABHLRN0 module is built-in with microcontroller STM32F429 (CPU Frequency 180MHZ) on control board. Winstar designed an UI (user interface). By using Winstar TFT UI editing program and firmware, users can accelerate the project development. More detailed information of this IPS 7" M Series TFT series, please find in the following content.
Below is the functions comparison of WF70MTIBGDRN0 and WF70MTABHLRN0:
(WF70G TN panel)
(WF70A8 IPS panel)
|Text Mode (ASCII)||V|
|Unicode Text Mode||V|
|Flash File System||V|
|QR code Generator||V|
|Storage Image In Flash||V|
|Paint SD Card Image||V||V|
1. UART commands are incompatible with the other M-Series TFT modules.
2. SPI Commands are incompatible with the other M-Series TFT modules.
1. Flash File System:
2. Unicode Text Mode (Multi-Font):
3. Storage Image In Flash:
4. QR code Generator:
5. Virtual Layer:
6. More Geometry function:
7. Show Image from SD Card:
8. Single color matting:
|QR code Generator|