2.7 inç,128x64, COG Grafik OLED Ekran Çerçeveli
Model No. WEF012864K
►Türü : Grafik
►Yapı : COG+Çerçeveli
►Boyut : 2.7 inç
►128x64 dot matrisi
►IC:SSD1309
►3V güç sağlayıcı
►1/64 görev
►Ara yüz : 6800, 8080, SPI, I2C
►OLED Rengi: Beyaz / Sarı / Gök Mavisi / Yeşil
Açıklama
WEF012864K, 128x64 piksel panel çözünürlüğüne sahip COG grafik 2.7 inç monokrom pasif PMOLED ekran modülüdür ve yüksek kontrast(10,000:1).. WEF012864K çoklu iletişim arabirimlerini destekleyen bir SSD1309 denetleyici IC'ye sahiptir: 6800, 8080, 4-Wire SPI ve I2C seri arayüz. 3V sürücü kullanır ve 1/64Duty modunu benimser.
WEF012864K modülü, WEO012864K ile aynı 2.7 inçlik OLED paneli kullanır, ancak müşteri montajı için eklenmiş bir demir çerçeve ile.
WEF012864K, COG yapıya sahip bir OLED ekran modülüdür. Organik, kendinden aydınlatmalıdır ve arka ışık gerektirmez. Modül ince, hafif ve düşük güç tüketimine sahiptir. WEF012864K modülü, elde taşınabilir ürünler, ölçüm cihazları, ev ürünleri, POS sistemleri, İnternet of Things, iletişim ekipmanları ve tıbbi ekipmanlar vb. için çok uygundur. Bu modülün çalışma sıcaklığı -40°C ila +80°C arasında ve depolama sıcaklığı -40°C ila +85°C arasındadır.
WEF012864K modülü, WEO012864K ile aynı 2.7 inçlik OLED paneli kullanır, ancak müşteri montajı için eklenmiş bir demir çerçeve ile.
WEF012864K, COG yapıya sahip bir OLED ekran modülüdür. Organik, kendinden aydınlatmalıdır ve arka ışık gerektirmez. Modül ince, hafif ve düşük güç tüketimine sahiptir. WEF012864K modülü, elde taşınabilir ürünler, ölçüm cihazları, ev ürünleri, POS sistemleri, İnternet of Things, iletişim ekipmanları ve tıbbi ekipmanlar vb. için çok uygundur. Bu modülün çalışma sıcaklığı -40°C ila +80°C arasında ve depolama sıcaklığı -40°C ila +85°C arasındadır.
ÇIZIM
Data source ref:WEF012864KWPP3N00000
AYRINTILAR
Arayüz Pin Fonksiyonlari
Pin No. | Sembol | Fonksiyon | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
1 | NC(GND) | No connection | |||||||||||||||
2 | VSS | Ground. | |||||||||||||||
3-10 | NC | No connection | |||||||||||||||
11 | VDD | Power supply pin for core logic operation | |||||||||||||||
12 | BS1 | MCU bus interface selection pins. Select appropriate logic setting as described in the following table. BS2 and BS1 are pin select
(1) 0 is connected to VSS (2) 1 is connected to VDD |
|||||||||||||||
13 | BS2 | ||||||||||||||||
14 | NC | No connection | |||||||||||||||
15 | CS# | This pin is the chip select input connecting to the MCU. The chip is enabled for MCU communication only when CS# is pulled LOW (active LOW). | |||||||||||||||
16 | RES# | This pin is reset signal input. When the pin is pulled LOW, initialization of the chip is executed. Keep this pin pull HIGH during normal operation. | |||||||||||||||
17 | D/C# | This pin is Data/Command control pin connecting to the MCU. When the pin is pulled HIGH, the data at D[7:0] will be interpreted as data. When the pin is pulled LOW, the data at D[7:0] will be transferred to a command register. In I2C mode, this pin acts as SA0 for slave address selection. When 3-wire serial interface is selected, this pin must be connected to VSS. | |||||||||||||||
18 | R/W# | This pin is read / write control input pin connecting to the MCU interface. When 6800 interface mode is selected, this pin will be used as Read/Write (R/W#) selection input. Read mode will be carried out when this pin is pulled HIGH and write mode when LOW. When 8080 interface mode is selected, this pin will be the Write (WR#) input. Data write operation is initiated when this pin is pulled LOW and the chip is selected. When serial or I2C interface is selected, this pin must be connected to VSS. | |||||||||||||||
19 | E/RD# | This pin is MCU interface input. When 6800 interface mode is selected, this pin will be used as the Enable (E) signal. Read/write operation is initiated when this pin is pulled HIGH and the chip is selected. When 8080 interface mode is selected, this pin receives the Read (RD#) signal. Read operation is initiated when this pin is pulled LOW and the chip is selected. When serial or I2C interface is selected, this pin must be connected to VSS. | |||||||||||||||
20~27 | D0~D7 | These pins are bi-directional data bus connecting to the MCU data bus. Unused pins are recommended to tie LOW. When serial interface mode is selected, D0 will be the serial clock input: SCLK; D1 will be the serial data input: SDIN and D2 should be kept NC. When I2C mode is selected, D2, D1 should be tied together and serve as SDAout, SDAin in application and D0 is the serial clock input, SCL. | |||||||||||||||
28 | IREF | This pin is the segment output current reference pin. IREF is supplied externally. | |||||||||||||||
29 | VCOMH | COM signal deselected voltage level. A capacitor should be connected between this pin and VSS. | |||||||||||||||
30 | VCC | Power supply for panel driving voltage. This is also the most positive power voltage supply pin. | |||||||||||||||
31 | NC(GND) | No connection |
Genel Özellikler
Kalem | Ölçü | Birim |
---|---|---|
Nokta Matrisi (Çözünürlük) | 128 × 64 | dot |
Modül ölçüleri | 89.7 × 47.2 ×3.4 | mm |
Aktif alan | 61.41 × 30.69 | mm |
Nokta boyutu | 0.45 × 0.45 | mm |
Nokta sıklığı | 0.48 × 0.48 | mm |
Display Mode | Pasif Matrisli | |
Display Color | Monokrom | |
Drive Duty | 1/64 Duty | |
IC | SSD1309 | |
Arayüz | 6800,8080,4-Wire SPI,I2C | |
Boyut (Köşegen) | 2.7 inç |
Maksimum Değerler
Parameter | Sembol | Minumum Deger | Maksimum Deger | Birim |
---|---|---|---|---|
Supply Voltage for Logic | VDD | -0.3 | 4 | V |
Supply Voltage for Display | VCC | 0 | 17 | V |
Çalışma Sıcaklığı | TOP | -40 | +80 | °C |
Saklama Sıcaklığı | TSTG | -40 | +85 | °C |
Elektronik Özellikleri
DC Elektronik Özellikleri
Kalem | Sembol | Durum | Minumum Deger | Tipik Deger | Maksimum Deger | Birim |
---|---|---|---|---|---|---|
Supply Voltage for Logic | VDD | - | 2.8 | 3.0 | 3.3 | V |
Supply Voltage for Display | VCC | - | 12.5 | 13.0 | 13.5 | V |
High Level Input | VIH | - | 0.8×VDD | - | - | V |
Low Level Input | VIL | - | - | - | 0.2×VDD | V |
High Level Output | VOH | - | 0.9×VDD | - | - | V |
Low Level Output | VOL | - | - | - | 0.1×VDD | V |
50% Check Board operating Current | VCC =13V | - | 22.0 | 33.0 | mA |
Search keyword: 128x64 oled, oled 128x64, 2.7 oled, 2.7 inç oled, oled 2.7