Ana sayfa Ürünler OLED Ekran Grafik OLED Ekran WEA012832P

1.71 inç COG+PCB 128x32,Grafik OLED Ekran

Model No. WEA012832P

►Türü : Grafik
►Yapı : COG+PCB
►Boyut : 1.71 inç
►128x32 dot matrisi
►IC:CH1115
►3V güç sağlayıcı
►1/32 görev
►Ara yüz : 4-Wire SPI
►OLED Rengi: Beyaz / Sarı

ÇIZIM

1.71 inch Graphic OLED Display Module 128x32 (COG+PCB) - WEA012832P
Data source ref: WEA012832PLAP3N00000

AYRINTILAR

Arayüz Pin Fonksiyonlari

No. Sembol Fonksiyon
1 GND Ground.
2 VCC Power supply pin for logic.
3 D0 When the serial interface is selected, then D0 serves as the serial clock input pad (SCL) and D1 serves as the serial data input pad (SI).
4 D1
5 RES# This pin is reset signal input. When the pin is pulled LOW, initialization of the chip is executed. Keep this pin HIGH (i.e. connect to VDD) during normal operation.
6 D/C# This is the Data/Command control pad that determines whether the data bits are data or a command.
D/C = "H": the inputs at D0 and D1 are treated as display data.
D/C = "L": the inputs at D0 and D1 are transferred to the command registers.
7 CS# This pin is the chip select input. (active LOW)

Mekanik Veri

Kalem Ölçü Birim
Nokta Matrisi 128 x 32
Modül ölçüleri 60.0 × 18.75 × 5.96(MAX) mm
Aktif alan 42.22 × 10.54 mm
Nokta boyutu 0.308 × 0.308 mm
Nokta sıklığı 0.33 × 0.33 mm
Display Mode Pasif Matrisli
Display Color Monokrom
Drive Duty 1/32 Duty
IC CH1115
Arayüz 4-Wire SPI
Boyut 1.71 inç

Maksimum Değerler

Parameter Sembol Minumum Deger Maksimum Deger Birim
Supply Voltage for Logic VCC -0.3 3.6 V
Çalışma Sıcaklığı TOP -40 +80 °C
Saklama Sıcaklığı TSTG -40 +85 °C

Elektronik Özellikleri

DC EElektronik Özellikleri

Kalem Sembol Durum Minumum Deger Tipik Deger Maksimum Deger Birim
Supply Voltage for Logic VCC 1.8 3.0 3.3 V
High Level Input VIH 0.8×VCC VCC V
Low Level Input VIL GND 0.2×VCC V
High Level Output VOH 0.8×VCC VCC V
Low Level Output VOL GND 0.2×VCC V
Display 50% Pixel on ICC VCC =3V - 40 30 mA
go top
close