128x64 2,42 polegadas,COG+FR Display OLED Gráfico - WEF012864G

128x64 2,42 polegadas,COG+FR Display OLED Gráfico

Model No. WEF012864G

►Tipo: Gráfico
►Estrutura: COG+com quadro
►Tamanho: 2,42 polegadas
►Matriz de pontos 128x64
►IC：SSD1309
►Alimentação 3V
►1/64 duty
►Interface: 6800, 8080, SPI, I2C
►Display Color: Branco / Amarelo / Céu azul / Verde

PDF DOWNLOAD

DEMO CODE ADD TO INQUIRY

PREV. BACK to LIST NEXT

Descrição

WEF012864G é um módulo de display PMOLED gráfico COG monocromático passivo de 2,42 polegadas com moldura de ferro e uma resolução de painel de 128x64 pixels e alto contraste(10,000:1). WEF012864G possui um controlador IC SSD1309 embutido e suporta uma variedade de interfaces, incluindo interfaces 6800, 8080, 4-Wire SPI e I2C. Utiliza um driver de 3V com um ciclo de trabalho de 1/64. A série utiliza os mesmos painéis OLED do modelo existente WEO012864G.

A série WEO012864G adota um design sem moldura de ferro.
A série WEO012864G-CTP adota um design sem moldura de ferro + tela sensível ao toque capacitiva (CTP).

WEF012864G é um módulo de display OLED de estrutura COG, orgânico, autoiluminante e sem necessidade de retroiluminação. Este módulo é fino, leve e tem baixo consumo de energia. O módulo WEF012864G é muito adequado para produtos portáteis, instrumentos de medição e produtos domésticos, e pode ser usado na Internet das Coisas, em equipamentos de comunicação e em dispositivos médicos. A temperatura de operação deste módulo é de -40℃ a +80℃, e a temperatura de armazenamento é de -40℃ a +85℃.

DRAWING

128x64, 2.42 inch COG Graphic OLED Display with Frame - WEF012864G

Data source ref:WEF012864GLAP3N00000

SPECIFICATIONS

Função do pino de interface

Pin No.

Símbolo

Função

NC(GND)

No connection

VSS

Ground.

3-10

No connection

VDD

Power supply pin for core logic operation

BS1

MCU bus interface selection pins. Select appropriate logic setting as described in the following table. BS2 and BS1 are pin select

	BS1	BS2
I2C	1	0
4-wire Serial	0	0
8-bit 68XX Parallel	0	1
8-bit 80XX Parallel	1	1

Note
(1) 0 is connected to VSS
(2) 1 is connected to VDD

BS2

No connection

CS#

This pin is the chip select input connecting to the MCU. The chip is enabled for MCU communication only when CS# is pulled LOW (active LOW).

RES#

This pin is reset signal input. When the pin is pulled LOW, initialization of the chip is executed. Keep this pin pull HIGH during normal operation.

D/C#

This pin is Data/Command control pin connecting to the MCU. When the pin is pulled HIGH, the data at D[7:0] will be interpreted as data. When the pin is pulled LOW, the data at D[7:0] will be transferred to a command register. In I2C mode, this pin acts as SA0 for slave address selection.

R/W#

This pin is read / write control input pin connecting to the MCU interface. When 6800 interface mode is selected, this pin will be used as Read/Write (R/W#) selection input. Read mode will be carried out when this pin is pulled HIGH and write mode when LOW. When 8080 interface mode is selected, this pin will be the Write (WR#) input. Data write operation is initiated when this pin is pulled LOW and the chip is selected. When serial or I2C interface is selected, this pin must be connected to VSS.

E/RD#

This pin is MCU interface input. When 6800 interface mode is selected, this pin will be used as the Enable (E) signal. Read/write operation is initiated when this pin is pulled HIGH and the chip is selected. When 8080 interface mode is selected, this pin receives the Read (RD#) signal. Read operation is initiated when this pin is pulled LOW and the chip is selected. When serial or I2C interface is selected, this pin must be connected to VSS.

20~27

D0~D7

These pins are bi-directional data bus connecting to the MCU data bus. Unused pins are recommended to tie LOW. When serial interface mode is selected, D0 will be the serial clock input: SCLK; D1 will be the serial data input: SDIN and D2 should be kept NC. When I2C mode is selected, D2, D1 should be tied together and serve as SDAout, SDAin in application and D0 is the serial clock input, SCL.

IREF

This pin is the segment output current reference pin. IREF is supplied externally.

VCOMH

COM signal deselected voltage level. A capacitor should be connected between this pin and VSS.

VCC

Power supply for panel driving voltage. This is also the most positive power voltage supply pin.

NC(GND)

No connection

Especificações Gerais

Article	Dimensions	Unité
Matriz de pontos	128 × 64	Pontos
Dimensão do módulo	77.2 × 42.14 ×3.4	mm
Área ativa	55.01 × 27.49	mm
Tamanho do ponto	0.40 × 0.40	mm
Distância entre pontos	0.43 × 0.43	mm
Modo de exibição	Passive Matrix
Cor de exibição	Monochrome
Drive Duty	1/64 Duty
IC	SSD1309
Interface	6800,8080,4-Wire SPI,I2C
Tamanho	2,42 polegadas

Classificações Máximas Absolutas

Parameter	Símbolo	Valor Min	Valor Máximo	Unidade
Supply Voltage for Logic	VDD	-0.3	4	V
Supply Voltage for Display	VCC	0	15	V
Temperatura de operação	TOP	-40	+80	°C
Temperatura de armazenamento	TSTG	-40	+85	°C

Características Eletrônicas

DC Características Eletrônicas

Article	Symbole	État	Valeur min	Valeur type	Valeur max	Unité
Supply Voltage for Logic	VDD	－	1.65	3.0	3.3	V
Supply Voltage for Display	VCC	－	12.5	13	13.5	V
High Level Input	VIH	－	0.8×VDD	－	－	V
Low Level Input	VIL	－	－	－	0.2×VDD	V
High Level Output	VOH	－	0.9×VDD	－	－	V
Low Level Output	VOL	－	－	－	0.1×VDD	V
50% Check Board operating Current		VCC =13.0V	－	18	27	mA

Search keyword: 128x64 oled, oled 128x64, 2.42 oled, 2.42 polegadas oled, oled 2.42