Home Products TFT LCD TFT Panel + Controller Board WF102QTIFGDBT0

TFT with TFT LCD Controller Board 10.2"

Model No. WF102QTIFGDBT0

►Display Format : 800 x 480
►Size : 10.2”
►View Direction : 12H
►Interface : MCU
►Built-in Controller : SSD1963
►Control-Board : Yes
►Brightness(cd/m2) : 250
►Frame Through Hole : No
►Touch Screen : Resistive Touch Panel (RTP)

DESCRIPTION

The 10.2 inch WF102QTIFGDBT0 is built in with SSD1963 controller board plus a 36 pin-out connector on board. This model is available in 8080 family MPU 8bit/16bit options and already defined pin no. 33 ~ 36 as backlight supply; so there is no need to design extra backlight circuit. This display is having TFT Resistive Touch Screen on module.

DRAWING

WF102QTIFGDBT0 - TFT with TFT LCD Controller Board 10.2

SPECIFICATIONS

Interface

Pin Symbol Function
1 GND System ground pin of the IC . Connect to system ground.
2 VDD Power Supply : +3.3V
3 BLE Backlight control signal , H: On \ L: Off
4 D/C Data/Command select
5 WR Write strobe signal
6 RD Read strobe signal
7~14 DB0~DB7 Data bus
15~22 DB8~DB15 Data bus (When select 8bits Mode, this pin is NC)
23~24 NC No connect
25 CS Chip select
26 RST Hardware reset
27 L/R Left / right selection; Default L/R=H
28 U/D Up/down selection; ; Default U/D=L
29 XL Left electrode
30 YU Top electrode
31 XR Right electrode
32 YD Bottom electrode
33~34 VLED- Power for LED Driver IC(GND)
35~36 VLED+ Power for LED Driver IC(+5V)

General Specifications

Item Dimension Unit
Size 10.2 inch
Dot Matrix 800 × RGB × 480 dots
Module dimension 235.0(H) × 145.8(V) × 12.4(D) mm
Active area 222.0(W) × 132.48(H) mm
Dot pitch 0.0925(W) × 0.276(H) mm
LCD type TFT, Normally White, Transmissive
View Direction 12 o'clock
Gray Scale Inversion Direction 6 o'clock
Backlight Type LED, Normally White
Controller IC SSD1963
Interface Digital 8080 family MPU 8bit/16bit
Touch Screen Resistive touch screen (RTP)
Surface Anti-Glare

Absolute Maximum Ratings

Item Symbol Min Typ Max Unit
Operating Temperature TOP -20 +70
Storage Temperature TST -30 +80

Electrical Characteristics

Item Symbol Condition Min Typ Max Unit
Supply Voltage For LCM VDD 3.0 3.1 3.3 V
Supply Current For LCM IDD 160 225 mA

Search keyword: tft 10.2, tft 10.2", 10.2 tft lcd, 10.2" tft lcd, 10.2 inch tft lcd, tft lcd 10.2, 10.2 tft display, 10.2" tft display, 10.2 inch tft display, tft display 10.2, tft display 10.2"
go top
close