ホーム 製品 TFT 液晶 モジュール IPS ディスプレイ, IPS TFT 液晶 WF101JSYAHLNB0

10.1インチ1024x600高輝度 LVDS IPS PCAP TFT 液晶

型番 WF101JSYAHLNB0

►サイズ: 10.1インチ
►解像度: 1024×600 dots
►視野角: IPS
►インターフェース: LVDS
►ドライバIC : EK79001HN + EK73215BCGA
►コントロールボード: オ無
►輝度(cd/m2): 900 (高輝度TFT)
►スルーホールフレーム: 無
►タッチパネル: 静電容量式タッチパネル (PCAP)
►検出ポイント: 5

製品情報

WF101JSYAHLNB0は、投影型静電容量式タッチパネル(PCAP)を備えた高輝度10.1インチIPS TFTLCDモジュールです。解像度1024x600ピクセルで作られています。 WF101JSYAHLNB0モデルには、EK79001HNおよびEK73215BCGAドライバーICが組み込まれています。この10.1インチIPSTFTは、TN TFTよりも広い視野角を持ち、視野角は左:85 /右:85 /上:85 /下:85度(標準値)です。LVDSインターフェース、明るさ900ニット(標準値)、グレア表面ガラスです。タッチパネルには、モジュールにILI2511ICが搭載されています。 USBインターフェースをサポートし、I2Cインターフェース、マルチタッチ機能にも使用でき、Windows、Linux、Android、およびMacオペレーティングシステムと互換性があります。USB/ I2Cインターフェースの詳細ILI2511ICを備えた容量性タッチスクリーン。WinstarのWebサイト(テクニカル)をご確認ください。

WF101JSYAHLNB0の電源電圧(VDD)は3.0V〜3.6Vで、標準値は3.3Vです。 -20℃から+ 70℃の温度と-30℃から+ 80℃の保管温度で動作できます。お客様が抵抗膜方式タッチパネルを必要とする場合は、WF101JSYAHLNT0モデルをご検討願います。

外形図

Affichage  IPS 10,1 pouces TFT, Écran IPS 10,1 - WINSTAR

製品仕様

ピン功能定義

Pin No. 記号 説明
1 VCOM Common voltage
2 VDD Digital power
3 VDD Digital power
4 NC Not connect
5 Reset Global reset pin. Active low to enter reset state. Suggest to connecting with an RC reset circuit for stability. Normally pull high. (R=10KΩ,C=1μF)
6 STBYB Standby mode, normally pull high STBYB=”1”, normal operation STBYB=”0”,timing control, source driver will turn off, all output are high-Z
7 GND Digital ground
8 RXIN0- Negative LVDS differential data inputs
9 RXIN0+ Positive LVDS differential data inputs
10 GND Digital ground
11 RXIN1- Negative LVDS differential data inputs
12 RXIN1+ Positive LVDS differential data inputs
13 GND Digital ground
14 RXIN2- Negative LVDS differential data inputs
15 RXIN2+ Positive LVDS differential data inputs
16 GND Digital ground
17 RXCLKN- Negative LVDS differential clock inputs
18 RXCLKN+ Positive LVDS differential clock inputs
19 GND Digital ground
20 RXIN3- Negative LVDS differential data inputs
21 RXIN3+ Positive LVDS differential data inputs
22 GND Digital ground
23 NC Not connect
24 NC Not connect
25 GND Digital ground
26 NC Not connect
27 NC Not connect
28 SELB 6-bit/8-bit input select SELB = L , 8-bit ; SELB = H , 6-bit
29 AVDD Analog power
30 GND Digital ground
31 LED- LED Cathode
32 LED- LED Cathode
33 L/R Left or right display control
34 U/D Up / down display control
35 VGL Negative power for TFT
36 NC Not connect
37 NC Not connect
38 VGH Positive power for TFT
39 LED+ LED Anode
40 LED+ LED Anode
When L/R=”0”,set right to left scan direction.
When L/R=”1”,set left to right scan direction.
When U/D=”0”,set top to bottom scan direction.
When U/D=”1”,set bottom to top scan direction.

PCAP PIN 定義

Pin 記号 説明
1 USB_VSS System ground
2 USB_VDD 5V Power supply
3 USB_D+ Data +
4 USB_D- Data -
5 VSS System ground
6 SDA I2C data input and output
7 SCL I2C clock input
8 RST External Reset, Low is active
9 INT External interrupt to the host
10 VDDT 3.3 Power supply

規格説明

項目 仕様 単位
表示サイズ(対角線) 10.1 インチ
ドットマトリクス(解像度) 1024 RGB x 600 dots
モジュールサイズ 235(W) x 143(H) x 8.78(D) mm
有効エリア 222.72 (H) x 125.28(V) mm
ドットピッチ 0.2175(W) x 0.2088(H) mm
LCDタイプ TFT, 黒色, 透過型
インターフェース LVDS
ドライバIC EK79001HN + EK73215BCGA または同等
視野角度 85/85/85/85
画面アスペクト比 16:9
バックライトタイプ LED, 白色
PCAP IC ILI2511 または同等
PCAP インターフェイス USB (I2C available)
PCAP FW バージョン V6.0.0.0.62.90.1.2
タッチパネルタイプ 静電容量方式タッチパネル
表面 防眩

最大绝对额定值

项目 符号 最小值 典型值 最大值 単位
動作温度 TOP -20 +70
保存温度 TST -30 +80

电气特性

典型動作条件 (At Ta = 25 °C,)

项目 符号 最小值 典型值 最大值 単位
LCDデジタル電源電圧 VDD 3 3.3 3.6 V
アナログ電源電圧 AVDD 9.89 10.2 10.5 V
Gate On 電源電圧 VGH 19.4 20.0 20.6 V
Gate Off 電源電圧 VGL -10.3 -10.0 -9.7 V
一般電源電圧 VCOM 4.0 4.3 4.6 V
ロジック高レベル入力電圧 VIH 0.7 VDD - VDD V
ロジック低レベル入力電圧 VIL 0 - 0.3 VDD V
Supply PCAP USB_VDD 5V 4.4 5.0 5.5 V
I VDD 5V - 97.8 120 mA
go top
close