Écran LCD IPS TFT 12.3 pouces 1920x720 avec Dalle Tactile Capacitive
N° de modèle WF123BSWAYLNBA
►Dimension 12.3 pouces
►Résolution d’écran: 1920x720 points
►Vue préférentielle: 85/85/85/85 (IPS)
►Interface : 2ch-LVDS
►CI pilote:HX8298-C01-LT+HX8695-E-LT
►Carte de contrôle: NON
►Luminosité(cd/m²): 650
►Trou dans le cadre: NON
►Dalle tactile: Avec dalle tactile capacitive (PCAP)
►Detect Point : 10 Fingers
►Température d’utilisation: -30~+85℃
Description
The WF123BSWAYLNBA is a 12.3-inch touch TFT display featuring IPS technology with wide viewing angles of 85/85/85/85. It boasts a resolution of 1920x720 dots and a brightness of 650 cd/m². The module's dimensions are 364.0mm (H) × 175.0mm (V), with an active area of 292.032mm (H) × 109.512mm (V).
Built with HX8298-C01-LT+HX8695-E-LT driver ICs, it supports 2ch-LVDS interfaces for efficient data transmission. Equipped with a Projected Capacitive Touch Panel (PCAP), it offers the capability to detect up to 10 points of contact simultaneously.
The display operates on a supply voltage (VCC) ranging from 3V to 3.6V, with a typical value of 3.3V. It can withstand operating temperatures from -30℃ to +85 ℃, making it suitable for various environments. Additionally, its storage temperatures range from -40 to +90 ℃, ensuring durability and reliability even in extreme conditions.
Built with HX8298-C01-LT+HX8695-E-LT driver ICs, it supports 2ch-LVDS interfaces for efficient data transmission. Equipped with a Projected Capacitive Touch Panel (PCAP), it offers the capability to detect up to 10 points of contact simultaneously.
The display operates on a supply voltage (VCC) ranging from 3V to 3.6V, with a typical value of 3.3V. It can withstand operating temperatures from -30℃ to +85 ℃, making it suitable for various environments. Additionally, its storage temperatures range from -40 to +90 ℃, ensuring durability and reliability even in extreme conditions.
DESSIN
SPÉCIFICATIONS
Fonction PIN sur l'interface
TFT LCD Module
FPC connector is used for electronics interface.
AORORA F31L-1A7H1-21050 , 50PIN
Pin no. | Symbole | Fonction |
---|---|---|
1 | GND | Ground |
2 | NC | No connector |
3 | VCC | Digital Power |
4 | VCC | Digital Power |
5 | GND | Panel Power |
6 | GND | Panel Power |
7 | NC | No connector |
8 | NC | No connector |
9 | GND | Ground |
10 | ORXIN0- | Odd pixel negative LVDS differential clock input |
11 | ORXIN0+ | Odd pixel positive LVDS differential clock input |
12 | ORXIN1- | Odd pixel negative LVDS differential clock input |
13 | ORXIN1+ | Odd pixel positive LVDS differential clock input |
14 | ORXIN2- | Odd pixel negative LVDS differential clock input |
15 | ORXIN2+ | Odd pixel positive LVDS differential clock input |
16 | ORXCLKIN- | Odd pixel negative LVDS differential clock input |
17 | ORXCLKIN+ | Odd pixel positive LVDS differential clock input |
18 | ORXIN3- | Odd pixel negative LVDS differential clock input |
19 | ORXIN3+ | Odd pixel positive LVDS differential clock input |
20 | ERXIN0- | Even pixel negative LVDS differential clock input |
21 | ERXIN0+ | Even pixel positive LVDS differential clock input |
22 | ERXIN1- | Even pixel negative LVDS differential clock input |
23 | ERXIN1+ | Even pixel positive LVDS differential clock input |
24 | ERXIN2- | Even pixel negative LVDS differential clock input |
25 | ERXIN2+ | Even pixel positive LVDS differential clock input |
26 | ERXCLKIN- | Even pixel negative LVDS differential clock input |
27 | ERXCLKIN+ | Even pixel positive LVDS differential clock input |
28 | ERXIN3- | Even pixel negative LVDS differential clock input |
29 | ERXIN3+ | Even pixel positive LVDS differential clock input |
30 | GND | Ground |
31 | NC | No connector |
32 | RESETB | Global reset pin, active low. |
33 | STBYB | Standby mode, active low. |
34 | CA3 | Output signal to indicate self protection mode, when DE,HS,VS,DCLK, any of these signals is missing, it will become High. If using this pin, CA3 need to pulled low by an resistor,else , let it floating. |
35 | SCL | Serial interface clock input. (User folating) |
36 | SDA | Serial interface data input/output.(User folating) |
37 | CSB | Serial interface chip enable.(User folating) |
38 | GND | Power Ground |
39 | GND | Power Ground |
40 | NC | No connector |
41 | LEDA | LED power (Anode) |
42 | LEDA | LED power (Anode) |
43 | LEDA | LED power (Anode) |
44 | NC | No connector |
45 | LEDK1 | Cathode 1 |
46 | LEDK2 | Cathode 2 |
47 | LEDK3 | Cathode 3 |
48 | LEDK4 | Cathode 4 |
49 | NTC_A | NTC_Anode |
50 | NTC_K | NTC_Cathode |
PCAP PIN Definition
Pin | Symbole | Fonction |
---|---|---|
1 | USB_VSS | System ground |
2 | USB_VDD 5V | Power supply |
3 | USB_D+ | Data + |
4 | USB_D- | Data - |
5 | VSS | System ground |
6 | SDA | I2C data input and output |
7 | SCL | I2C clock input |
8 | RST | External Reset, Low is active |
9 | INT | External interrupt to the host |
10 | VDDT 3.3 | Power supply |
Spécifications générales
Article | Dimensions | Unité |
---|---|---|
Dimension | 12.3 | pouces |
Pixel Number | 1920 RGB (H) × 720(V) | pixel |
Dimensions du module | 364.0(H) × 175.0 (V) × 10.7 | mm |
Zone active | 292.032(H) × 109.512(V) | mm |
Pas des points | 0.1521(H) × 0.1521 (V) | mm |
Type de LCD | TFT, Noir, Transmissif | |
CI pilote | HX8298-C01-LT+HX8695-E-LT ou équivalent | |
Angle de vue | 85/85/85/85 | |
Type de rétroéclairage | LED, Blanc | |
TFT Interface | 2ch-LVDS | |
PCAP IC | ILI2511 ou équivalent | |
PCAP Interface | USB (I2C available) | |
Version PCAP FW | V6.0.0.0.0.0.0.3 | |
Dalle tactile | Avec dalle tactile capacitive,PCA | |
Surface | Reflets |
Valeurs nominales maximales absolues
Article | Symbole | Valeur min | Valeur type | Valeur max | Unité |
---|---|---|---|---|---|
Température de fonctionnement | TOP | -30 | - | +85 | ℃ |
Température de stockage | TST | -40 | - | +90 | ℃ |
Caractéristiques électroniques
Article | Symbole | Valeur min | Valeur type | Valeur max | Unité |
---|---|---|---|---|---|
Supply Voltage | VCC | 3 | 3.3 | 3.6 | V |
Input signal voltage | ViH | VCC *0.7 | - | VCC | V |
ViL | 0 | - | VCC *0.3 | V | |
Current of power supply | ICC | - | - | 500 | mA |
Inrush current | IRUSH | - | - | 2.0 | A |
Supply PCAP (USB) | USB_VDD 5V | 4.75 | 5.0 | 5.25 | V |
I USB_VDD | - | 90 | 135 | mA | |
Supply PCAP (I2C) | VDDT 3.3 | 3.15 | 3.3 | 3.45 | V |
IVDDT | - | 90 | 135 | mA |