4,3 pouces 480x272 pour Affichage TFT Haute Luminosité Signal HDMI
N° de modèle WF43WSYFEDHNV
►Dimension 4.3 pouces
►Résolution d’écran: 480×272 points
►Vue préférentielle 80/80/80/80
►Interface: Support HDMI Connector (Only DVI Signal)
►Contrôleur IC: TFP401
►Carte de contrôle: Yes
►Luminosité (Cd/m²): 1000
►Cadre de maintien avec points de fixation: NON
►Dalle tactile: Sans dalle tactile
►Température d’utilisation: -20~+70℃
Description
WF43WSYFEDHNV est un module TFT-LCD IPS haute luminosité de 4,3 pouces, avec une résolution de 480x272 pixels. WF43WSYFEDHNV est livré avec une carte de contrôle qui prend en charge l'interface HDMI (uniquement DVI) et possède un connecteur GPIO à 40 broches sur la carte ; il est conçu pour rendre l'utilisation de Raspberry Pi plus facile. La carte de contrôle sur le module est dotée de quatre trous de montage, ce qui permet aux clients de fixer facilement les modules sur leurs applications. La série HDMI WF43W prend également en charge la fonction PWM (modulation de largeur d'impulsion) pour ajuster la luminosité du rétroéclairage LED. WF43WSYFEDHNV adopte un panneau IPS qui offre un angle de vision plus large de gauche : 80 / droite : 80 / haut : 80 / bas : 80 degrés (valeur typique). Ce modèle TFT est équipé du circuit intégré de contrôleur TFP401, il prend en charge l'interface HDMI (uniquement pour DVI), avec une luminosité de 1000 nits (valeur typique). Nous proposons également en option des panneaux tactiles résistifs (RTP) et des panneaux tactiles capacitifs projetés (PCAP) pour la série de signaux HDMI WF43W, disponibles sous les références WF43WSYFEDHTV (RTP) et WF43WSYFEDHGV (PCAP).
La tension d'alimentation pour le LCM (VDD) de WF43WSYFEDHNV est de 5V, la surface en verre brillant, le rapport d'aspect est de 16:9, le rapport de contraste est de 800:1 (valeur typique). Il peut fonctionner à des températures allant de -20°C à +70°C et être stocké dans des températures allant de -30°C à +80°C.
DESSIN
SPÉCIFICATIONS
Spécifications générales
Article | Dimensions | Unité |
---|---|---|
Dimension | 4.3 | pouce |
Matrice de points | 480 × RGB × 272(TFT) | points |
Dimensions du module | 105.5(W) × 84.2(H) × 22.13(D) | mm |
Zone active | 95.04 ×53.856 | mm |
Pas des points | 0.198 × 0.198 | mm |
Type de LCD | TFT, Noir, Transmissif | |
Vue préférentielle | 80/80/80/80 (IPS) | |
Rapport d'aspect | 16:9 | |
Contrôleur IC | TFP401 | |
Interface | HDMI(only for DVI) | |
Type de rétroéclairage | LED, Blanc | |
Avec/sans dalle tactile | sans dalletactile | |
Surface | Reflets |
Valeurs nominales maximales absolues
Article | Symbole | Valeur min | Valeur type | Valeur max | Unité |
---|---|---|---|---|---|
Température de fonctionnement | TOP | -20 | - | +70 | ℃ |
Température de stockage | TST | -30 | - | +80 | ℃ |
Caractéristiques électroniques
Operating conditionsArticle | Symbole | État | Valeur min | Valeur type | Valeur max | Unité |
---|---|---|---|---|---|---|
Supply Voltage For LCM | VDD | - | - | 5.0 | - | V |
Supply Current For LCM | IDD | - | - | 950 | 1400 | mA |
LED life time | - | - | - | 50,000 | - | Hr |
Fonction PIN sur l'interface
1. LCM PIN Definition(CON4)
Pin | Symbole | Fonction | Remark |
---|---|---|---|
1 | NC | No connector | |
2 | 5V | Raspberry Pi:Power 5V | |
3 | GPIO02 | Raspberry Pi:GPIO02 | |
4 | 5V | Raspberry Pi:Power 5V | |
5 | GPIO03 | Raspberry Pi:GPIO03 | |
6 | GND | Raspberry Pi:GND | |
7 | GPIO04 | Raspberry Pi:GPIO04 | |
8 | GPIO14 | Raspberry Pi:GPIO14 | |
9 | GND | Raspberry Pi:GND | |
10 | GPIO15 | Raspberry Pi:GPIO15 | |
11 | GPIO17 | Raspberry Pi:GPIO17 | |
12 | GPIO18 (PWM_BL) |
Raspberry Pi:GPIO18 (PWM adjusts the backlight brightness) | Note2 |
13 | GPIO27 | Raspberry Pi:GPIO27 | |
14 | GND | Raspberry Pi:GND | |
15 | GPIO22 | Raspberry Pi:GPIO22 | |
16 | GPIO23 | Raspberry Pi:GPIO23 | |
17 | NC | No connector | |
18 | GPIO24 | Raspberry Pi:GPIO24 | |
19 | GPIO10 | Raspberry Pi:GPIO10 | |
20 | GND | Raspberry Pi:GND | |
21 | GPIO09 | Raspberry Pi:GPIO09 | |
22 | GPIO25 | Raspberry Pi:GPIO25 | |
23 | GPIO11 | Raspberry Pi:GPIO11 | |
24 | GPIO08 | Raspberry Pi:GPIO08 | |
25 | GND | Raspberry Pi:GND | |
26 | GPIO07 | Raspberry Pi:GPIO07 | |
27 | ID_SD | Raspberry Pi:ID_SD | |
28 | ID_SC | Raspberry Pi:ID_SC | |
29 | GPIO05 | Raspberry Pi:GPIO05 | |
30 | GND | Raspberry Pi:GND | |
31 | GPIO06 | Raspberry Pi:GPIO06 | |
32 | GPIO12 | Raspberry Pi:GPIO12 | |
33 | GPIO13 | Raspberry Pi:GPIO13 | |
34 | GND | Raspberry Pi:GND | |
35 | GPIO19 | Raspberry Pi:GPIO19 | |
36 | GPIO16 | Raspberry Pi:GPIO16 | |
37 | GPIO26 | Raspberry Pi:GPIO26 | |
38 | GPIO20 | Raspberry Pi:GPIO20 | |
39 | GND | Raspberry Pi:GND | |
40 | GPIO21 | Raspberry Pi:GPIO21 |
2. LCM PIN Definition(CON5)
Pin | Symbole | Fonction | Remark |
---|---|---|---|
1 | 3.3V | TFT Module Power limit can only output 3.3V,100mA | Note1 |
2 | 5V | Raspberry Pi:Power 5V | |
3 | GPIO02 | Raspberry Pi:GPIO02 | |
4 | 5V | Raspberry Pi:Power 5V | |
5 | GPIO03 | Raspberry Pi:GPIO03 | |
6 | GND | Raspberry Pi:GND | |
7 | GPIO04 | Raspberry Pi:GPIO04 | |
8 | GPIO14 | Raspberry Pi:GPIO14 | |
9 | GND | Raspberry Pi:GND | |
10 | GPIO15 | Raspberry Pi:GPIO15 | |
11 | GPIO17 | Raspberry Pi:GPIO17 | |
12 | GPIO18 (PWM_BL) |
Raspberry Pi:GPIO18 (PWM adjusts the backlight brightness) | Note2 |
13 | GPIO27 | Raspberry Pi:GPIO27 | |
14 | GND | Raspberry Pi:GND | |
15 | GPIO22 | Raspberry Pi:GPIO22 | |
16 | GPIO23 | Raspberry Pi:GPIO23 | |
17 | 3.3V | TFT Module Power limit can only output 3.3V,100mA | Note1 |
18 | GPIO24 | Raspberry Pi:GPIO24 | |
19 | GPIO10 | Raspberry Pi:GPIO10 | |
20 | GND | Raspberry Pi:GND | |
21 | GPIO09 | Raspberry Pi:GPIO09 | |
22 | GPIO25 | Raspberry Pi:GPIO25 | |
23 | GPIO11 | Raspberry Pi:GPIO11 | |
24 | GPIO08 | Raspberry Pi:GPIO08 | |
25 | GND | Raspberry Pi:GND | |
26 | GPIO07 | Raspberry Pi:GPIO07 | |
27 | ID_SD | Raspberry Pi:ID_SD | |
28 | ID_SC | Raspberry Pi:ID_SC | |
29 | GPIO05 | Raspberry Pi:GPIO05 | |
30 | GND | Raspberry Pi:GND | |
31 | GPIO06 | Raspberry Pi:GPIO06 | |
32 | GPIO12 | Raspberry Pi:GPIO12 | |
33 | GPIO13 | Raspberry Pi:GPIO13 | |
34 | GND | Raspberry Pi:GND | |
35 | GPIO19 | Raspberry Pi:GPIO19 | |
36 | GPIO16 | Raspberry Pi:GPIO16 | |
37 | GPIO26 | Raspberry Pi:GPIO26 | |
38 | GPIO20 | Raspberry Pi:GPIO20 | |
39 | GND | Raspberry Pi:GND | |
40 | GPIO21 | Raspberry Pi:GPIO21 |
Note1: The 3.3V supply current is limited; please pay special attention to use
Note2:PWM dimming frequency is about 100Hz
3. HDMI (only for DVI)
Pin No. | Symbole | I/O | Fonction | Remark |
---|---|---|---|---|
1 | Rx2+ | I | +LVDS Differential Data Input | |
2 | GND | P | Ground | |
3 | Rx2- | I | -LVDS Differential Data Input | |
4 | Rx1+ | I | +LVDS Differential Data Input | |
5 | GND | P | Ground | |
6 | Rx1- | I | -LVDS Differential Data Input | |
7 | Rx0+ | I | +LVDS Differential Data Input | |
8 | GND | P | Ground | |
9 | Rx0- | I | -LVDS Differential Data Input | |
10 | RxC+ | I | +LVDS Differential Clock Input | |
11 | GND | P | Ground | |
12 | RxC- | I | -LVDS Differential Clock Input | |
13-16 | NC | - | No connection | |
17 | GND | P | Ground | |
18 | 5V | P | Power Supply | |
19 | Detect | I/O | Hot plug detect |
I: input, O: output, P: Power
4. USB PIN Definition (CON3)
Pin | Symbole | Fonction | Remark |
---|---|---|---|
1 | 5V | Power Supply (5V) | |
2 | D- | Data line - | |
3 | D+ | Data line + | |
4 | NC | No connection | |
5 | GND | Power Ground |