Issue No. 124
- 1) Shipping Arrangement before Stocktaking
- 2) Shipping Address for RMA Return Goods to Taiwan
- 3) 1.28 inch COG OLED WEO012864L-ZIF Version
- 4) Introduction: 4.3 Inch IPS TFT WF43WTYAEDNN0
- 5) 4.3 Inch IPS TFT High Brightness WF43WSYAEDNN0
- 6) Winstar HDMI TFT-LCD Series
Winstar Display will have half yearly inventory audit in late of June for Taiwan and China plants. Please note that we will stop shipping and receiving shipment during this period. Below are the last shipping date before the inventory check and the first shipping date after the stocktaking for your reference. Please work with Winstar sales persons closely before the stocktaking if your shipment might be affected.
Shipping From China►Last shipping date: June 27, 2019
►First shipping date: July 1, 2019
Shipping From Taiwan►Last shipping date: June 25, 2019
►First shipping date: July 1, 2019
Winstar RMA office is not in our headquarters office which is located in another building in Central Taiwan Science Park of Taiwan. For RMA return goods, please contact your Winstar sales persons before shipping in order to receive a Return Material Authorization (RMA) number. Please mark RMA number on outside of carton and add RMA NO. on shipping documents.
RMA Address: 2F, No.25, Keya Rd., Daya Dist., Taichung City 428, Taiwan
Tel: +886-4-2568 9987
Fax: +886-4-2568 7763
Recipient: please mark: "Winstar RMA Center"
Please mark “RMA” number on carton, and add RMA no. on shipping documents.
WEO012864L-ZIF is a 1.28" COG ZIF version OLED display module; it's made of 128x64 dot matrix format. This 1.28 inch Graphic OLED module is built in with controller SH1106G IC; it supports 8-bit 6800 and 8080, 3-wire/4-wire SPI and I2C interfaces. WEO012864L-ZIF module can be operating at temperatures from -40℃ to +80℃; its storage temperatures range from -40℃ to +85℃. These OLED COG modules are ultra thin, lightweight and low power consumption which is great for handheld instruments, meters, smart grid, medical device, IoT system, etc. This model is available in white and yellow colors. For detail information, please contact us.
WF43WTYAEDNN0 is a 4.3 inch IPS TFT display with resolution 480x270 pixels. It is built in with SC7283 driver IC; it supports RGB-24bit interface, with brightness 500 nits (typical value), aspect ratio 16:9, contrast ratio 800 (typical value), glare surface glass. We also offer Resistive Touch Panels (RTP) and Projected Capacitive Touch Panel (PCAP) optional for WF43W model.
This 4.3 inch TFT-LCD is an IPS (In-Plane Switching) Panel which having the advantage of wider viewing angle of Left:80 / Right:80 / Up:80 / Down:80 degree (typical) provides great angle-visibility. WF43WTYAEDNN0 module can be operating at temperatures from -20℃ to +70℃; its storage temperatures range from -30℃ to +80℃.
WF43WSYAEDNN0 is a High Brightness 4.3 inch wider view angle IPS TFT LCD module, with 480x272 pixels. This TFT model is built in with SC7283 driver IC, it supports 24-bit RGB interface, brightness 1000 nits (typical value). We also offer Resistive Touch Panels (RTP) and Projected Capacitive Touch Panel (PCAP) optional for WF43W model.
This 4.3” IPS TFT has a wider viewing angle than TN TFT, the view angle is Left:80 / Right:80 / Up:80 / Down:80 degree (typical value). The supply voltage for LCM (VCC) of WF43WSYAEDNN0 is from 3.0V to 3.6V, Glare surface glass, aspect ratio 16:9, contrast ratio 800 (typical value). It can be operating at temperatures from -20℃ to +70℃ and storage temperatures from -30℃ to +80℃.
Winstar TFT LCD product portfolio come with HDMI interface TFT LCD modules, our HDMI Displays Family are designed to work with the Raspberry Pi or embedded system, single board computers (or desktop/laptops) which requires HDMI output. These series TFT modules come with a control board with HDMI interface; it is designed to make Raspberry Pi usage become easily. Please note our standard HDMI TFT modules which part number suffixed with “X” support Raspberry Pi 1~3 version only. If customers’ application requires supporting Raspberry Pi3B+ version, please choose the module part numbers suffixed with “V” which support Pi3B+ version. More details, please check our website.
Our HDMI TFT modules now are available in sizes 5", 7"and 10.1 inch. We offer Resistive Touch Panels (RTP) and Projected Capacitive Touch Panel (PCAP) for each size. The HDMI TFT is becoming more popular, customers can simply use the HDMI TFT display with your Raspberry Pi, and also you can use it as computer display with any device which has HDMI output.
Welcome to check online for the specification including panel size, controller IC, brightness, as well as resolution. For more detailed information , please contact our sales persons or via firstname.lastname@example.org.
► Link to Winstar HDMI TFT web page