제품 OLED 디스플레이 그래픽 OLED 디스플레이 WEO012864J-CTP

12864, 2.42" OLED 디스플레이 모듈용량식 터치패널이 있는

모델 번호 WEO012864J-CTP

►유형 : 그래픽
►구조 : COG
►크기 : 2.42 인치
►128 x 64 점 행렬
►내장형 컨트롤러 SSD1309
►3V 전원 공급 장치
►1/64 duty
►인터페이스 : 8080 옵션 6800, SPI, I2C
►용량식 터치패널
►디스플레이 색상: 백색 / 노란색 / 하늘색 / 녹색

도면

12864, 2.42 inch OLED Display Module with Capacitive Touch Panel - WEO012864J-CTP

Data source ref: WEO012864JWPP3D00000

사양

인터페이스 핀 기능

No. 기호 기능
1 VDD Power supply pin for core logic operation
2 VSS Ground.
3 NC(GND) No connection
4~11 D0~D7 These pins are bi-directional data bus connecting to the MCU data bus.
Unused pins are recommended to tie LOW.
12 CS# This pin is the chip select input connecting to the MCU.
The chip is enabled for MCU communication only when CS# is pulled LOW (active LOW).
13 NC(GND) No connection
14 RES# This pin is reset signal input.
When the pin is pulled LOW, initialization of the chip is executed.
Keep this pin pull HIGH during normal operation.
15 R/W# This pin is read / write control input pin connecting to the MCU interface.
When 6800 interface mode is selected, this pin will be used as Read/Write (R/W#) selection input. Read mode will be carried out when this pin is pulled HIGH and write mode when LOW.
16 D/C# This pin is Data/Command control pin connecting to the MCU.
When the pin is pulled HIGH, the data at D[7:0] will be interpreted as data.
When the pin is pulled LOW, the data at D[7:0] will be transferred to a command register.
17 E This pin is MCU interface input.
When 6800 interface mode is selected, this pin will be used as the Enable (E) signal.
18 NC(GND) No connection
19 DISP No Connection
20 NC(GND) No connection
21 TP_INT Interrupt signal, active low, asserted to request
Host start a new transaction
22 TP_SDA I2C data signal
23 TP_SCL I2C clock signal
24 TP_RST External reset signal, active low

기계적 데이터

항목 치수 단위
도트 매트릭스 128 x 64
모듈 치수 75.0 × 52.7 ×10.2 MAX mm
활성 영역 55.01 × 27.49 mm
도트 크기 0.40 × 0.40 mm
도트 피치 0.43 × 0.43 mm
디스플레이 모드 패시브 매트릭스
디스플레이 색상 Monochrome
Drive Duty 1/64 Duty
IC SSD1309
인터페이스 8Bits 6800 , Optional 8080 / 4-SPI / I2C
크기 2.42 인치
PCAP IC GT911
Detect Point 1
PCAP 인터페이스 I2C
표면 눈부심

절대 최대 정격값

Parameter 기호 최소값 최대값 단위
Supply Voltage for Logic VDD -0.3 4 V
작동 온도 TOP -20 +70 °C
보관 온도 TSTG -30 +80 °C

전기적 특성

DC 전기적 특성

항목 기호 조건 최소값 대표값 최대값 단위
Supply Voltage for Logic VDD 2.8 3.0 3.3 V
High Level Input VIH 0.8×VDD V
Low Level Input VIL 0.2×VDD V
High Level Output VOH 0.9×VDD V
Low Level Output VOL 0.1×VDD V
50% Check Board operating Current IDD VDD =3V - 150 300 mA

Search keyword: 128x64 oled, oled 128x64, 2.42 oled, 2.42" oled, 2.42 inch oled, oled 2.42, oled 2.42"

go top
close