Pantalla TFT con PCAP Touch Screen 10.1"
Modelo Nº WF101LSYJPLNG0
►Tamaño : 10.1”
►Resolución : 1280×800 puntos
►Dirección de la vista : IPS
►Interfaz : LVDS
►Driver IC：EK79202B1
►Placa de control : No
►Brillo cd/m²): 900
►Agujero del bastidor : No
►Pantalla táctil : Con panel táctil capacitivo (PCAP)
►Detect Point : 5 Fingers
►Pantalla TFT Capacitiva IPS, LCD IPS Touchscreen Capacitivo
DIBUJO
ESPECIFICACIONES
Función interfaz Pin
LCM PIN Definition
| Pin No. | Símbolo | I/O | Función |
|---|---|---|---|
| 1 | DC12V | P | Power Supply |
| 2 | DC12V | P | Power Supply |
| 3 | DC12V | P | Power Supply |
| 4 | NC | - | No connection |
| 5 | GND | P | Ground |
| 6 | GND | P | Ground |
| 7 | GND | P | Ground |
| 8 | Rxin0- | I | -LVDS Differential Data Input |
| 9 | Rxin0+ | I | +LVDS Differential Data Input |
| 10 | GND | P | Ground |
| 11 | Rxin1- | I | -LVDS Differential Data Input |
| 12 | Rxin1+ | I | +LVDS Differential Data Input |
| 13 | GND | P | Ground |
| 14 | Rxin2- | I | -LVDS Differential Data Input |
| 15 | Rxin2+ | I | +LVDS Differential Data Input |
| 16 | GND | P | Ground |
| 17 | RxCLK- | I | -LVDS Differential Clock Input |
| 18 | RxCLK+ | I | +LVDS Differential Clock Input |
| 19 | GND | P | Ground |
| 20 | Rxin3- | I | -LVDS Differential Data Input |
| 21 | Rxin3+ | I | +LVDS Differential Data Input |
| 22 | GND | P | Ground |
| 23 | PWM | This pin is connected to the external LED driver. PWM type control signal for brightness of the LED backlight. If not used, please float this pin. | |
| 24 | NC | - | No connection |
| 25 | DC3V | P | Power Supply |
| 26 | NC | - | No connection |
| 27 | GND | P | Ground |
| 28 | SDA | I/O | Serial communication data input. |
| 29 | SCL | I | Serial communication clock input |
| 30 | INT | O | External interrupt to the host |
| 31 | RST | I | External Reset, Low is active |
| 32 | GND | P | Ground |
| 33~43 | NC | - | No connection |
| 44 | GND | P | Ground |
| 45 | GND | P | Ground |
| 46 | GND | P | Ground |
| 47 | NC | - | No connection |
| 48 | DC12V | P | Power Supply |
| 49 | DC12V | P | Power Supply |
| 50 | DC12V | P | Power Supply |
Especificaciones generales
| Elemento | Dimensión | Unit |
|---|---|---|
| Tamaño | 10.1 | pulgada |
| Resolución | 1280 x 3(RGB) x 800 | dots |
| Dimensión del módulo | 257.96 × 168.6 × 25.88 | mm |
| zona activa | 216.96 (H) × 135.6(V) | mm |
| Distancia entre puntos | 0.1695 × 0.1695 | mm |
| Modo de visualización | Negro , Transmisivo | |
| Viewing Angle | 80/80/80/80 | |
| Disposición de píxeles | R.G.B. Vertical Stripe | |
| TFT Controlador IC | EK79202B1 o equivalente | |
| Tipo de retroiluminación | LED, Blanco | |
| Relación de aspecto | 16:10 | |
| TFT Interfaz | LVDS | |
| PCAP FW Version | 80 | |
| PCAP IC | GT928 o equivalente | |
| PCAP Interfaz | I2C | |
| PCAP Resolución | 1280*800 | |
| Con o sin panel táctil | Con panel táctil capacitivo, PCAP | |
| Surface | Deslumbramiento | |
Valores nominales máximos absolutos
| Elemento | Símbolo | Valor mín. | Valor típico | Valor máx. | Unidad |
|---|---|---|---|---|---|
| Temperatura de funcionamiento | TOP | -20 | － | +70 | ℃ |
| Temperatura de almacenamiento | TST | -30 | － | +80 | ℃ |
Características electrónicas
Condiciones de operación típicas：
| Elemento | Símbolo | Valor mín. | Valor típico | Valor máx. | Unidad |
|---|---|---|---|---|---|
| Tensión de alimentación para LCM +12V | DC12V | - | 12.0 | - | V |
| Corriente de suministro para LCM +12V | IDC12V | - | 620 | 950 | mA |
| Tensión de alimentación para PCAP (I2C) | DC3V | 3.15 | 3.3 | 3.45 | V |
| Corriente de suministro para PCAP (I2C) | IDC3V | - | 14 | 21 | mA |
Características de la luz de fondo：
| Parameter | Símbolo | Valor mín. | Valor típico | Valor máx. | Unidad |
|---|---|---|---|---|---|
| Nivel de control PWM (LED_PWM) | High Level | - | 3.3 | - | V |
| Low Level | - | 0 | - | V | |
| Relación de trabajo de control PWM | - | 1 | - | 100 | % |
| Frecuencia de control PWM | - | - | 10K | - | Hz |
| Tiempo de vida del LED | - | 50,000 | - | - | Hr |
