Display LCD TFT 1024x600 de 7 polegadas Com Toque Capacitivo LVDS
Model No. WF70A7TIAHLNB0
►Tamanho: 7 polegadas
►Resolução : 1024×600 pontos
►Direção de exibição: 12H
►Interface : LVDS
►Driver IC:EK79001HE + EK73215BCGA
►Placa de controle : Não
►Brilho(cd/m2): 450
►Quadro com furo passante : Não
►Tela de Toque: Com painel de toque capacitivo (PCAP)
►PCAP Interface : USB (I2C available)
Descrição
WF70A7TIAHLNB0 é um módulo de display LCD TFT totalmente a cores 1024x600, tamanho diagonal de 7 polegadas e a relação de aspecto é de 16:9, com Painel Tátil Capacitivo no módulo. Este modelo tem dimensão de módulo de 202 x 135,5 mm e tamanho de área ativa de 154,2144 x 85,92 mm. Este módulo está integrado com EK79001HE e EK73215BCGA IC; suporta interface LVDS. The LVDS interface is a great solution because of its high speed of data transmission while using low voltage and improved noise performance. The LVDS interface has several benefits for TFT displays. It is much less susceptible to EMI and crosstalk issues, and peripherals in need of high bandwidth, like high-definition graphics and fast frame rates, allowing the transmitting device to be located farther from the display.
O painel tátil capacitivo está integrado com o IC controlador ILI2511 que suporta interface USB e I2C com um ponto de detecção que suporta o toque de 5 pontos. Este display LCD TFT 1024x600 com Painel Tátil Capacitivo de 5,7 polegadas com tem painel com superfície ofuscante, direção de visualização das 12 horas, inversão da escala de cinzas das 6 horas, apresentado com brilho de 450 cd/m2 (valor típico) e relação de contraste (valor típico) de 800:1.
A tensão de fonte de alimentação é de 3,0V a 3,6V, valor típico é 3,3V. Este módulo pode operar a temperaturas de -20℃ a +70℃; suas temperaturas de armazenamento variam de -30℃ a +80℃.
DRAWING
SPECIFICATIONS
Função do pino de interface
1.LCM PIN DefinitionPin No. | Símbolo | I/O | Função |
---|---|---|---|
1 | VCOM | P | Common Voltage |
2 | VDD | P | Digital circuit |
3 | VDD | P | Digital circuit |
4 | NC | --- | No connection |
5 | Reset | I | Global reset pin |
6 | STBYB | I | Standby mode, Normally pulled high STBYB = “1”, normal operation STBYB = “0”, timing controller, source driver will turn off, all output are High-Z |
7 | GND | P | Ground |
8 | RXIN0- | I | Negative LVDS differential data input |
9 | RXIN0+ | I | Positive LVDS differential data input |
10 | GND | P | Ground |
11 | RXIN1- | I | Negative LVDS differential data input |
12 | RXIN1+ | I | Positive LVDS differential data input |
13 | GND | P | Ground |
14 | RXIN2- | I | Negative LVDS differential data input |
15 | RXIN2+ | I | Positive LVDS differential data input |
16 | GND | P | Ground |
17 | RXCLKIN- | I | Negative LVDS differential clock input |
18 | RXCLKIN+ | I | Positive LVDS differential clock input |
19 | GND | P | Ground |
20 | RXIN3- | I | Negative LVDS differential data input |
21 | RXIN3+ | I | Positive LVDS differential data input |
22 | GND | P | Ground |
23 | NC | --- | No connection |
24 | NC | --- | No connection |
25 | GND | P | Ground |
26 | NC | --- | No connection |
27 | DIMO | O | Backlight CABC controller signal output |
28 | SELB | I | 6bit/8bit mode select H:6bit / L:8bit |
29 | AVDD | P | Power for Analog Circuit |
30 | GND | P | Ground |
31 | LED- | P | LED Cathode |
32 | LED- | P | LED Cathode |
33 | L/R | I | Horizontal inversion |
34 | U/D | I | Vertical inversion |
35 | VGL | P | Negative power for TFT |
36 | GND | P | Ground |
37 | GND | P | Ground |
38 | VGH | P | Positive power for TFT |
39 | LED+ | P | LED Anode |
40 | LED+ | P | LED Anode |
PCAP PIN Definition
Pin | Símbolo | Função |
---|---|---|
1 | USB_VSS | System ground |
2 | USB_VDD 5V | Power supply |
3 | USB_D+ | Data + |
4 | USB_D- | Data - |
5 | VSS | System ground |
6 | SDA | I2C data input and output |
7 | SCL | I2C clock input |
8 | RST | External Reset, Low is active |
9 | INT | External interrupt to the host |
10 | VDDT 3.3 | Power supply |
Especificações Gerais
Item | Dimensão | Unidade |
---|---|---|
Tamanho | 7 | polegadas |
Matriz de pontos | 1024 × RGB × 600(TFT) | pontos |
Dimensão do módulo | 202.0 (W) × 135.5 (H) × 8.73 (D) | mm |
Área ativa | 154.2144 × 85.92 | mm |
Distância entre pontos | 0.1506× 0.1432 | mm |
Tipo LCD | TFT, Branco, Transmissivo | |
Direção de exibição | 12 o'clock | |
Direção de inversão de escala cinza | 6 o'clock | |
Direção de exibição | 16:9 | |
Control IC | -- | |
TFT IC do controlador | EK79001HE + EK73215BCGA | |
TFT Interface | LVDS | |
Tipo de luz de fundo | LED, Branco | |
Painel de toque | painel de toque capacitivo | |
PCAP IC | ILI2511 ou equivalente | |
PCAP Interface | USB (I2C available) | |
PCAP FW Version | V 6. 0. 0. 0. 7.65. 0. 1 | |
Superfície | Reflexo |
Classificações Máximas Absolutas
Item | Símbolo | Valor Min | Valor Típico | Valor Máximo | Unidade |
---|---|---|---|---|---|
Temperatura de operação | TOP | -20 | - | +70 | ℃ |
Temperatura de armazenamento | TST | -30 | - | +80 | ℃ |
Características Eletrônicas
Typical Operation Conditions
Item | Símbolo | Valor | Unidade | ||
---|---|---|---|---|---|
Valor Min | Valor Típico | Valor Máximo | |||
Power voltage | DVDD | 3.0 | 3.3 | 3.6 | V |
AVDD | 9.4 | 9.6 | 9.8 | V | |
VGH | 17 | 18 | 19 | V | |
VGL | -6.6 | -6.0 | -5.4 | V | |
Supply Voltage For Touch Logic |
VDDT | 4.4 | 5.0 | 5.5 | V |
Input signal voltage | VCOM | 3.1 | 3.3 | 3.6 | V |
Input logic high voltage | VIH | 0.7 DVDD | - | DVDD | V |
Input logic low voltage | VIL | 0 | - | 0.3 DVDD | V |
Current Consumption
Item | Símbolo | Valor | Unidade | ||
---|---|---|---|---|---|
Valor Min | Valor Típico | Valor Máximo | |||
Current for Driver | IGH | - | 0.2 | 1.0 | mA |
IGL | - | 0.2 | 1.0 | mA | |
IDVDD | - | 4.0 | 10 | mA | |
IAVDD | - | 20 | 50 | mA |
Backlight Driving Conditions
Item | Símbolo | Valor | Unidade | ||
---|---|---|---|---|---|
Valor Min | Valor Típico | Valor Máximo | |||
Voltage for LED backlight | VL | 8.4 | 9.8 | 10.8 | V |
Current for LED backlight | IL | -- | 300 | -- | mA |
LED life time | - | - | 50,000 | - | Hr |