Display LCD COG Gráfico de 240x128
Model No. WO240128B
►LCD COG
►Módulo Display LCD Gráfico
►240 x 128 pontos
►IC: ST7586S
►Alimentação +3,3V
►1/128 duty cycle
►Interface : 6800/8080/SPI
DRAWING
Data source ref:WO240128B-TFH#
SPECIFICATIONS
Função do pino de interface
Pin No. | Símbolo | DESCRIÇÃO | ||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
1 | ESD GND | Electro-Static discharge | ||||||||||||||||||||
2 | VG | VG is the power of SEG-drivers | ||||||||||||||||||||
3 | XV0 | Negative operating voltage of COM-drivers | ||||||||||||||||||||
4 | V0 | Positive operating voltage of COM-drivers | ||||||||||||||||||||
5 | VM | VM is the non-select voltage level of COM-drivers. | ||||||||||||||||||||
6 | VDDA | Power supply | ||||||||||||||||||||
7 | VSS | Ground | ||||||||||||||||||||
8 | VD1 | Digital power source selection. | ||||||||||||||||||||
9 | VDDI | VDD1 is the power of interface I/O circuit | ||||||||||||||||||||
10 | CSB | Chip select input pin CSB=“L”: This chip is selected and the MPU interface is active CSB=“H”: This chip is not selected and the MPU interface is disabled (D[7:0] are high impedance) |
||||||||||||||||||||
11 | IF3 | These pins select interface operation mode.
|
||||||||||||||||||||
12 | IF2 | |||||||||||||||||||||
13 | IF1 | |||||||||||||||||||||
14 | RSTB | Reset input pin. When RSTB is “L”, internal initialization procedure is executed. | ||||||||||||||||||||
15 | /RD(E) | Read / Write execution control pin. (This pin is only used in parallel interface)
|
||||||||||||||||||||
16~23 | D7~D0 | The bi-directional data bus of the MPU interface. When CSB is “H”, they are high impedance. If using serial interface: D0 is the SDA signal in 4-Line & 3-Line interface. D1 is the A0 signal in 4-Line interface |
||||||||||||||||||||
24 | /WR/(R/W) | Read / Write execution control pin. (This pin is only used in parallel interface
|
||||||||||||||||||||
25 | A0(SCL) | The function of this pin is different in parallel and serial interface In parallel interface: A0 is register selection input A0 = "H": inputs on data bus are display data A0 = "L": inputs on data bus are command In serial interface: this pad will be used as SCL (serial-clock) input |
||||||||||||||||||||
26 | ESD GND | Electro-Static discharge |
Dados Mecânicos
Item | Dimensão | Unidade |
---|---|---|
Number of Characters | 240 x 128 | - |
Dimensão do módulo | 122.2 x 79.8 x 6.5 (MAX) | mm |
View area | 114.0 x 64.0 | mm |
Área ativa | 107.98 x 57.58 | mm |
Tamanho do ponto | 0.43 x 0.43 | mm |
Distância entre pontos | 0.45 x 0.45 | mm |
Duty | 1/128D,1/12B | |
Tipo de luz de fundo | LED | |
IC | ST7586S | |
Interface | 6800/8080/3-Line/4-Line |
Classificações Máximas Absolutas
Item | Símbolo | Min | Típico | Máximo | Unidade |
---|---|---|---|---|---|
Number of dots | TOP | -20 | - | +70 | ℃ |
Temperatura de armazenamento | TST | -30 | - | +80 | ℃ |
Digital Power Supply Voltage | VDDI | -0.3 | - | 3.6 | V |
Analog Power supply voltage | VDDA | -0.3 | - | 3.6 | V |
LCD Power supply voltage | V0-XV0 | -0.3 | - | 19 | V |
LCD Power supply voltage | VG | -0.3 | - | 5.5 | V |
Características Eletrônicas
Item | Símbolo | Condition | Min | Típico | Máximo | Unidade |
---|---|---|---|---|---|---|
Supply Voltage For Logic | VDD-VSS | - | 3.0 | 3.3 | 3.6 | V |
Supply Voltage For LCM | VDD-V0 | Ta=-20℃ Ta=25℃ Ta=70℃ |
- |
- 15.0 - |
- 15.2 - |
V V V |
Input High Volt. | VIH | - | 0.7VDD | - | VDD | V |
Input Low Volt. | VIL | - | VSS | - | 0.3VDD | V |
Output High Volt. | VOH | - | 0.8VDD | - | VDD | V |
Output Low Volt. | VOL | - | VSS | - | 0.2VDD | V |
Supply Current(No include LED Backlight) | IDD | VDD=3.3V | - | 2.0 | 4.0 | mA |
Search keyword: 240x128 lcd, 240 x 128 lcd, lcd 240x128, lcd 240 x 128