Display LCD COG Gráfico de 240x64
Model No. WO24064D
►LCD COG
►Módulo Display LCD Gráfico
►240 x 64 pontos
►IC: ST7586S
►Alimentação +3,3V
►1/64 duty cycle
►Interface : 6800/8080/SPI
Descrição
WO24064D é um módulo de LCD gráfico COG monocromático no formato 240x64 pontos. O display LCD gráfico COG padrão 240 x 64 da Winstar, modelo WO24064D, é equipado com um circuito integrado ST7586S que suporta interfaces SPI / 6800 / 8080 e uma interface opcional de 4 linhas SPI ou 3 linhas SPI. O módulo tem dimensões de 86,2 x 39,3 mm e uma área ativa de 76,78 x 20,46 mm. Este módulo LCD pode operar em temperaturas de -20℃ a +70℃. A tensão de alimentação lógica é de 3,0V a 3,4V, com um valor típico de 3,3V e um duty cycle de condução de 1/64. Este display LCD COG é particularmente adequado para máquinas médicas, instrumentos de teste, sistemas de segurança doméstica, equipamentos de controle industrial, etc.
DRAWING
Data source ref:WO24064D-TFH#
SPECIFICATIONS
Função do pino de interface
Pin No. | Símbolo | Level | DESCRIÇÃO | ||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
1 | VG | P | VG is the power of SEG-drivers. | ||||||||||||||||||||
2 | XV0 | P | Negative operating voltage of COM-drivers. | ||||||||||||||||||||
3 | V0 | P | Positive operating voltage of COM-drivers. V0O is the output of the positive Vop generator. V0I is the positive Vop supply of LCD drivers. V0S is the sensor of the positive Vop generator. V0O, V0I & V0S should be separated on ITO and be connected together by FPC. |
||||||||||||||||||||
4 | VM | P | VM is the non-select voltage level of COM-drivers. | ||||||||||||||||||||
5 | VDDA | P | Analog power for internal booster. | ||||||||||||||||||||
6 | VSS | P | Ground | ||||||||||||||||||||
7 | VD1 | P | VD1I is the power source of digital circuits. | ||||||||||||||||||||
8 | VDDI | P | Power of interface I/O circuit. | ||||||||||||||||||||
9 | CSB | Input | Chip select input pin. CSB=“L”: This chip is selected and the MPU interface is active. CSB=“H”: This chip is not selected and the MPU interface is disabled (D[7:0] are high impedance). |
||||||||||||||||||||
10 | IF3 | Input | These pins select interface operation mode.
|
||||||||||||||||||||
11 | IF2 | ||||||||||||||||||||||
12 | IF1 | ||||||||||||||||||||||
13 | RSTB | Input | Reset input pin. When RSTB is “L”, internal initialization procedure is executed. | ||||||||||||||||||||
14 | /RD(E) | Input | Read / Write execution control pin. (This pin is only used in parallel interface) | ||||||||||||||||||||
15 | D7 | I/O | The bi-directional data bus of the MPU interface. When CSB is “H”, they are high impedance. If using serial interface: D0 is the SDA signal in 4-Line & 3-Line interface. D1 is the A0 signal in 4-Line interface |
||||||||||||||||||||
16 | D6 | ||||||||||||||||||||||
17 | D5 | ||||||||||||||||||||||
18 | D4 | ||||||||||||||||||||||
19 | D3 | ||||||||||||||||||||||
20 | D2 | ||||||||||||||||||||||
21 | D1 | ||||||||||||||||||||||
22 | D0 | ||||||||||||||||||||||
23 | NC | No connection | |||||||||||||||||||||
24 | /WR(R/W) | Input | Read / Write execution control pin. (This pin is only used in parallel interface) | ||||||||||||||||||||
25 | A0(SCL) | Input | The function of this pin is different in parallel and serial interface. In parallel interface: A0 is register selection input. A0 = "H": inputs on data bus are display data; A0 = "L": inputs on data bus are command. _ In serial interface: this pad will be used as SCL (serial-clock) input |
||||||||||||||||||||
26 | VSS | P | Ground |
Dados Mecânicos
Item | Dimensão | Unidade |
---|---|---|
Number of Dots | 240 x 64 | - |
Dimensão do módulo | 86.2 x 39.3 x 5.1 | mm |
View area | 80.8 x 24.8 | mm |
Área ativa | 76.78 x 20.46 | mm |
Tamanho do ponto | 0.30 x 0.30 | mm |
Distância entre pontos | 0.32 x 0.32 | mm |
Duty | 1/64 | |
Tipo de luz de fundo | LED | |
IC | ST7586S | |
Interface | 6800/8080/3-Line/4-Line |
Classificações Máximas Absolutas
Item | Símbolo | Min | Típico | Máximo | Unidade |
---|---|---|---|---|---|
Temperatura de operação | TOP | -20 | - | +70 | ℃ |
Temperatura de armazenamento | TST | -30 | - | +80 | ℃ |
Digital Power Supply Voltage | VDDI | -0.3 | - | 3.6 | V |
Analog Power supply voltage | VDDA | -0.3 | - | 3.6 | V |
LCD Power supply voltage | V0-XV0 | -0.3 | - | 19 | V |
LCD Power supply voltage | VG | -0.3 | - | 5.5 | V |
Características Eletrônicas
Item | Símbolo | Condition | Min | Típico | Máximo | Unidade |
---|---|---|---|---|---|---|
Supply Voltage For Logic | VDD-VSS | - | 3.0 | 3.3 | 3.4 | V |
Supply Voltage For LCM | XV0-V0 | Ta=-20℃ Ta=25℃ Ta=70℃ |
- 9.8 - |
- 10.0 - |
- 10.2 - |
V V V |
Input High Volt. | VIH | - | 0.7 VDD | - | VDD | V |
Input Low Volt. | VIL | - | VSS | - | 0.3VDD | V |
Output High Volt. | VOH | - | 0.8VDD | - | VDD | V |
Output Low Volt. | VOL | - | VSS | - | 0.2VDD | V |
Supply Current(No include LED Backlight) | IDD | VDD=3.3V | - | 1.5 | - | mA |
Search Keyword: lcd 240x64, lcd 240 x 64, 240x64 lcd, 240 x 64 lcd