도면
Data source ref:WEA009664BLAP3N00000
사양
인터페이스 핀 기능
No. | 기호 | 기능 |
---|---|---|
1 | SDA | When serial interface mode is selected, D0 will be the serial clock input: SCLK; D1 will be the serial data input: SDIN. |
2 | SCL | |
3 | SA0 | This pin is Data/Command control pin connecting to the MCU. |
4 | RST | This pin is reset signal input. When the pin is pulled LOW, initialization of the chip is executed. Keep this pin HIGH (i.e. connect to VDD) during normal operation. |
5 | CS | This pin is the chip select input. (active LOW). |
6 | VDD | 3.0V Power supply pin for core logic operation. |
7 | VIN | 5.0V Power supply pin for core logic operation. |
8 | GND | This is a ground pin. |
기계적 데이터
항목 | 치수 | 단위 |
---|---|---|
도트 매트릭스 | 96 × 64 | 인치 |
모듈 치수 | 31.5 × 31.5 × 2.72 | mm |
활성 영역 | 22.53 × 15.01 | mm |
도트 크기 | 0.205 × 0.205 | mm |
도트 피치 | 0.235 × 0.235 | mm |
디스플레이 모드 | 패시브 매트릭스 | |
디스플레이 색상 | Monochrome | |
그레이스케일 | 4 bits | |
Drive Duty | 1/64 Duty | |
IC | SSD1327 | |
인터페이스 | SPI | |
크기 | 1.1 인치 |
전기적 특성
항목 | 기호 | 조건 | 최소값 | 대표값 | 최대값 | 단위 |
---|---|---|---|---|---|---|
Supply Voltage for Logic(3V) | VDD | - | 2.8 | 3.0 | 3.2 | V |
Supply Voltage for Logic(5V) | VIN | - | 4.8 | 5.0 | 5.2 | V |
Input High Volt. | VIH | - | 0.8×VDD | - | VDD | V |
Input Low Volt. | VIL | - | 0 | - | 0.2×VDD | V |
Output High Volt. | VOH | - | 0.9×VDD | - | VDD | V |
Output Low Volt. | VOL | - | 0 | - | 0.1×VDD | V |
50% Check Board operating Current | IDD | VDD=3.0V | - | 55 | 100 | mA |
절대 최대 정격값
Parameter | 기호 | 최소값 | 최대값 | 단위 |
---|---|---|---|---|
Supply Voltage for Logic | VDD | 1.65 | 3.30 | V |
Supply Voltage for Logic | VIN | 4.0 | 6.0 | V |
작동 온도 | TOP | -40 | 80 | °C |
보관 온도 | TSTG | -40 | 85 | °C |