제품 그래픽 LCD WG320240BP3

LCD 디스플레이 320x240

모델 번호 WG320240BP3

►그래픽 LCD 모듈 320x240
►흑백 디스플레이
►IC: S1D13700
►내장형 음전압 발생기
►1/240 듀티 사이클
►터치스크린 옵션 (아날로그 형)
►온도 보상 범위
►인터페이스: 6800/8080
►터치패널 드라이버를 결합한, 26개 핀

도면

WG320240BP3 - Winstar

사양

인터페이스 핀 기능

Pin No. 기호 Level 기능
1 VSS 0V Ground
2 VDD 5.0V Power supply for Logic
3 VO (Variable) Driving voltage for LCD
4 A0 H/L RD=L WR=H ,A0=L :Data Read AO=H :Status read
RD=H WR=L ,A0=L :Data Write AO=H :Command write
5 ___
WR
H/L 8080 family: Write signal, 6800 family: R/W signal
6 ___
RD
H/L 8080 family: Read signal, 6800 family: Enable clock
7~14 DB0~DB7 H/L Data bus line
15 ___
CS
H/L Chip select ,Active L
16 ___
RES
H/L Controller reset signal, Active L
17 Vee   Negative Voltage Output
18 SEL1   8080 or 6800 interface select
19 DCLK   External Clock Input. This clock runs the SAR conversion process and synchronizes serial data I/O.
20 /CS   Chip Select Input. Controls conversion timing and enables the serial input/output register. CS high = power-down mode (ADC only).
21 DIN   Serial Data Input. If CS is low, data is latched on rising edge of DCLK.
22 DOUT   Serial Data Output. Data is shifted on the falling edge of DCLK. This output is high impedance when CS is high.
23 PEN   Pen Interrupt. Open anode output (requires 10kΩ to 100kΩ pull-up resistor externally).
24 PEN1   Pen Interrupt. Open anode output (requires 10kΩ to 100kΩ pull-up resistor externally).
25 NC   No connection
26 AUX   Auxiliary Input to AD

기계적 데이터

항목 치수 단위
도트 매트릭스 320 × 240
모듈 치수 160.0 × 109.0 × 12.5(MAX) mm
보기 영역 122.0 × 92.0 mm
활성 영역 115.18 × 86.38 mm
도트 크기 0.33 × 0.33 mm
도트 피치 0.36 × 0.36 mm
Duty 1/240
역광 타입 LED
IC S1D13700

절대 최대 정격값

항목 기호 최소값 대표값 최대값 단위
작동 온도 TOP -20 70
보관 온도 TST -30 80
입력 전압 VIN -0.3 VDD+0.5 V
출력 전압 VOUT -0.3 VDD+0.5 V
Supply Voltage For Logic VDD-VSS 0 6.5 V
Supply Voltage For LCD VDD-V0 0 32 V

전기적 특성

항목 기호 조건 최소값 대표값 최대값 단위
Supply Voltage For Logic VDD-VSS 4.5 5.0 5.5 V
Supply Voltage For LCD VDD-V0 Ta=-20℃
Ta=25℃
Ta=70℃

23.0
22.2

23.6
26.1
24.2
V
V
V
Input High Volt. VIH 3.5 V
Input Low Volt. VIL 1.0 V
Output High Volt. VOH VDD-0.4 V
Output Low Volt. VOL 0.4 V
Supply Current IDD VDD=5.0V 65.0 75.0 85.0 mA

Search Keyword: 320x240 lcd, 320 x 240 lcd, lcd 320 x240
go top
close