Module Affichage LCD TFT 5.7 pouces avec Résolution 320x240, RTP
N° de modèle WF57A3TIGCDNT0
►Dimension 5.7 pouces
►Résolution d’écran: 320x240 points
►Vue préférentielle 12h
►Interface: RGB
►CI pilote：HX8218+HX8615
►Carte de contrôle: NON
►Luminosité (Cd/m²): 600
►cadre de maintien avec points de fixation: Yes
►Dalle tactile: Avec dalle tactile résistive (RTP)
Description
The WF57A3TIGCDNT0 type belongs to the 5.7-inch Winstar Y Series TFT LCD module, which is a derivative model of the WF57E. The distinguishing feature of the WF57Y is its consistent use of a 40-pin pre-defined FPC on TFT LCD modules, shared across all sizes within the Y Series. These Y Series modules are derived from Winstar's existing standard TFTs, with a standardized pin assignment into a 40-pin FPC. The FPC is centrally positioned at the bottom of the TFT panel for each module. The WF57Y model offers optional SYNC mode and DE mode, and it incorporates a built-in DC-DC multi-output power supply (VGH, VGL, AVDD, VCOM). The WF57A3TIGCDNT0 specifically includes an RTP module, with options available for CTP and models without TP.
Key Advantages of Winstar TFT Y Series:
- All Y Series TFT modules come with a pre-designed integrated 40-pin FPC placed centrally at the bottom of the TFT panel for easy integration.
- Customers only need to supply Logic Power, Backlight Power, and RGB signal, simplifying product design.
- All Y Series modules feature a built-in DC-DC multi-output power supply (VGH, VGL, AVDD, VCOM).
- Multi-Function Capacitive Touch Panel and Resistive Touch Panel options are available for all Y Series modules.
DESSIN
SPÉCIFICATIONS
Interface
| Pin | Symbole | Function |
|---|---|---|
| 1 | NC | No connection |
| 2 | NC | No connection |
| 3 | GND | System ground pin of the IC. Connect to system ground. |
| 4 | VCC | Power Supply |
| 5 | R0 | Red Data bit(LSB) |
| 6 | R1 | Red Data bit |
| 7 | R2 | Red Data bit |
| 8 | R3 | Red Data bit |
| 9 | R4 | Red Data bit |
| 10 | R5 | Red Data bit |
| 11 | R6 | Red Data bit |
| 12 | R7 | Red Data bit (MSB) |
| 13 | G0 | Green Data bit(LSB) |
| 14 | G1 | Green Data bit |
| 15 | G2 | Green Data bit |
| 16 | G3 | Green Data bit |
| 17 | G4 | Green Data bit |
| 18 | G5 | Green Data bit |
| 19 | G7 | Green Data bit |
| 20 | G7 | Green Data bit (MSB) |
| 21 | B0 | Blue Data bit(LSB) |
| 22 | B1 | Blue Data bit |
| 23 | B2 | Blue Data bit |
| 24 | B3 | Blue Data bit |
| 25 | B4 | Blue Data bit |
| 26 | B5 | Blue Data bit |
| 27 | B6 | Blue Data bit |
| 28 | B7 | Blue Data bit (MSB) |
| 29 | GND | System ground pin of the IC. Connect to system ground. |
| 30 | CLK | Dot data clock |
| 31 | R/L | Shift direction of device internal shift register control. |
| 32 | Hsync | Horizontal sync signal |
| 33 | Vsync | Vertical sync signal |
| 34 | DE | Data Enable signal |
| 35 | U/D | Up/down selection |
| 36 | RESET | Hardware reset |
| 37 | XR | Right electrode |
| 38 | YD | Bottom electrode |
| 39 | XL | Left electrode |
| 40 | YU | Top electrode |
Spécifications générales
| Article | Dimensions | Unité |
|---|---|---|
| Dimension | 5.7 | pouce |
| Matrice de points | 320 × RGB × 240 (TFT) | points |
| Dimensions du module | 141.12(W) × 101.55(H) ×7.55(D) | mm |
| Zone active | 115.2 × 86.40 | mm |
| Pas des points | 0.12 × 0.36 | mm |
| Type de LCD | TFT, Blanc, Transmissif | |
| TFT CI pilote | HX8218 +HX8615 ou équivalent | |
| TFT Interface | 24-bit RGB | |
| Zone d'affichage | 12 o'clock | |
| Inversion de sens de l'échelle de gris | 6 o'clock | |
| Rapport d'aspect | 4:3 | |
| Type de rétroéclairage | LED, Blanc | |
| Avec/sans dalle tactile | Avec dalle tactile résistive | |
| Surface | Anti-Reflets | |
Valeurs nominales maximales absolues
| Article | Symbole | Min | Typ | Max | Unité |
|---|---|---|---|---|---|
| Température de fonctionnement | TOP | -20 | － | +70 | ℃ |
| Température de stockage | TST | -30 | － | +80 | ℃ |
Caractéristiques électroniques
1. Conditions de fonctionnement：| Article | Symbole | État | Min | Typ | Max | Unité |
|---|---|---|---|---|---|---|
| Supply Voltage For Logic | VCC | － | 3.0 | 3.3 | 3.6 | V |
| Supply Current | ICC | VCC=3.3V | － | 230 | 345 | mA |
2.Conditions de conduite LED :
| Paramètre | Symbole | Min | Typ | Max | Unité |
|---|---|---|---|---|---|
| Courant LED | - | - | 140 | - | mA |
| Consommation d'énergie | - | 1240 | - | 1470 | mW |
| Tension LED | VBL+ | 8.6 | - | 10.5 | V |
| Durée de vie des DEL | - | - | 50,000 | - | Hr |
