Home Productos Pantalla TFT Pantalla TFT con placa controladora LCD WF43WTYFEDBN0

Pantalla TFT 4.3" con placa controladora LCD

Modelo Nº WF43WTYFEDBN0

►Tamaño : 4.3 pulgada
►Resolución : 480×272 puntos
►Dirección de la vista : IPS
►Interfaz : MCU
►Controlador IC:SSD1963
►Placa de control : Yes
►Brillo (cd/m²): 500
►Agujero del bastidor : No
►Pantalla táctil : Sin panel táctil

DIBUJO

4.3 inch IPS 480x272 TFT LCD with Controller Board - WF43WTYFEDBN0

ESPECIFICACIONES

Función interfaz Pin

Pin Símbolo Función
1 GND System round pin of the IC. Connect to system ground.
2 VDD Power Supply : +3.3V
3 BL_E Backlight control signal , H: On \ L: Off
4 D/C Data/Command select
5 WR Write strobe signal
6 RD Read strobe signal
7 DB0 Data bus
8 DB1 Data bus
9 DB2 Data bus
10 DB3 Data bus
11 DB4 Data bus
12 DB5 Data bus
13 DB6 Data bus
14 DB7 Data bus
15 DB8 Data bus (When select 8bits mode, this pin is NC)
16 DB9 Data bus (When select 8bits mode, this pin is NC)
17 DB10 Data bus (When select 8bits mode, this pin is NC)
18 DB11 Data bus (When select 8bits mode, this pin is NC)
19 DB12 Data bus (When select 8bits mode, this pin is NC)
20 DB13 Data bus (When select 8bits mode, this pin is NC)
21 DB14 Data bus (When select 8bits mode, this pin is NC)
22 DB15 Data bus (When select 8bits mode, this pin is NC)
23 NC No connection
24 NC No connection
25 CS Chip select
26 RESET Hardware reset
27 DIP ON Display control H: On \ L:Off
28 NC No connection
29 NC No connection
30 NC No connection
31 NC No connection
32 NC No connection
33 VLED- VLED- for B/L  LED inverter  (GND)
34 VLED- VLED- for B/L  LED inverter  (GND)
35 VLED+ VLED+ for B/L  LED inverter   (+3.3V)
36 VLED+ VLED+ for B/L  LED inverter   (+3.3V)

Especificaciones generales

Elemento Dimensión Unidad
Tamaño 4.3 pulgada
Matriz de puntos 480 × RGB × 272(TFT) puntos
Dimensión del módulo 105.5 x 67.2 x 6.5 mm
zona activa (AA) 95.04 x 53.856 mm
Distancia entre puntos 0.066 × 0.198 mm
Tipo de LCD TFT, Noir, Transmisivo
Solo ángulo de visión 80/80/80/80
Rapport d'aspect 16:9
Tipo de retroiluminación LED, Blanco
Controlador IC SSD1963 
Interfaz Digital 8080 family MPU 8bit/16bit
Con o sin panel táctil Sin pantalla táctil
Superficie Reflets

Valores nominales máximos absolutos

Elemento Símbolo Valor mín. Valor típico Valor máx. Unidad
Temperatura de funcionamiento TOP -20 +70
Temperatura de almacenamiento TST -30 +80

Características electrónicas

Typical Operation Conditions

Elemento Símbolo Condition Valor mín. Valor típico Valor máx. Unidad
Supply Voltage For LCM VDD - 3.0 3.1 3.3 V
Supply Current For LCM IDD - - 50 75 mA
 

Backlight Driving Conditions

Parameter Símbolo Valor mín. Valor típico Valor máx. Unidad
Operation Current For LED Driver VLED+s=3.3V 200 - 350 mA
Power Consumption VLED+=3.3V 660 - 1155 mW
Supply Voltage For LED Driver VLED+ 3.3 - 5 V
LED Life Time   - 50,000 - Hr
go top
close