Home Productos Pantalla OLED Pantalla OLED Gráfico WEA012864AE

1.54" COG+PCB 128x64 Módulos Gráficos OLED

Modelo Nº WEA012864AE

►Tipo : Gráfico
►Estructura : COG+PCB
►Tamaño : 1.54"
►Matriz de puntos 128 x 64
►IC:CH1116
►Fuente de alimentación de 3V
►1/64 duty
►Interfaz : 4-wire SPI
►Color de la pantalla: Blanco / Amarillo

DIBUJO

1.54 inch COG OLED Graphic 128x64 with PCB - WEA012864AE

Data source ref: WEA012864AEWAP3N00000

ESPECIFICACIONES

Función interfaz Pin

No. Símbolo Función
1 GND Ground
2 VCC Power supply input
3 D0 The serial clock input
4 D1 The serial data input
5 RES# This is a reset signal input pad. When RES# is set to "L", the settings are initialized. The reset operation is performed by the RES# signal level.
6 D/C# This is the Data/Command control pad that determines whether the data bits are data or a command.
D/C# ="H":the input at D1 is treated as display data
D/C# ="L":the input at D1 is transferred to the command registers.
7 CS# This pad is the chip select input. When CS# ="L", then the chip select becomes active, and data/command I/O is enabled.

Datos mecánicos

Elemento Dimensión Unidad
Matriz de puntos 128 × 64 -
Dimensión del módulo 42.4 x 38.0 x 5.36 (MAX) mm
zona activa 35.05 × 17.51 mm
Tamaño del punto 0.249 × 0.249 mm
Distancia entre puntos 0.274 × 0.274 mm
Modo de visualización Matriz pasiva
Color de la pantalla Monochrome
Drive Duty 1/64 Duty
IC CH1116
Interfaz 4-wire SPI
Tamaño (Diagonal) 1.54 pulgada

Valores nominales máximos absolutos

Parameter Symbol Valor mín. Valor máx. Unidad
Supply Voltage for Display VCC 0 7 V
Temperatura de funcionamiento TOP -40 +80 °C
Temperatura de almacenamiento TSTG -40 +85 °C

Características electrónicas

Elemento Símbolo Condición Valor mín. Valor típico Valor máx. Unidad
Supply Voltage for Logic VCC 2.8 3.0 5.5 V
High Level Input VIH 0.8×VCC - VCC V
Low Level Input VIL VSS - 0.2×VCC V
High Level Output VOH 0.8×VCC - VCC V
Low Level Output VOL VSS - 0.2×VCC V
Display 50% Pixel on ICC VCC =3.0V - 60 120 mA
go top
close