5,7 Zoll TFT-Displays mit Control-board
Modellnummer WF57A2TIBCDBN0
►Größe: 5,7 Zoll
►Auflösung: 320 x 240 Punkten
►Betrachtungsrichtung: 12H
►Schnittstelle: MCU
►Integrierter Controller:SSD1963
►Steuerplatine: Ja
►Helligkeit (cd/m²): 900
►Durchsteckrahmen: Ja
►Touchscreen: ohne Touchscreen
►O-Film: optional
Beschreibung
Das WF57Q ist ein 5,7-Zoll-TFT-Display der Q-Serie, die mit der SSD1963-Controller-Platine ausgestattet ist und einen 36-Pin-Anschluss hat. Das Modul kann mit 8-Bit oder 16-Bit betrieben werden. Die Pins Nr. 33 - 36 sind bereits als Versorgung für die Hintergrundbeleuchtung festgelegt. Es besteht also keine Notwendigkeit, eine zusätzliche Hintergrundbeleuchtungsschaltung zu entwerfen. Das Modul hat eine Abmessung von 141,12 x 101,55 mm.
Zeichnung
Technische Daten
Schnittstelle
LCM PIN Definition (CON3)Pin | Symbol | Funktion |
---|---|---|
1 | GND | System ground pin of the IC . Connect to system ground. |
2 | VDD | Power Supply : +3.3V |
3 | BLE | Backlight control signal , H: On \ L: Off |
4 | D/C | Data/Command select |
5 | WR | Write strobe signal |
6 | RD | Read strobe signal |
7 | DB0 | Data bus |
8 | DB1 | Data bus |
9 | DB2 | Data bus |
10 | DB3 | Data bus |
11 | DB4 | Data bus |
12 | DB5 | Data bus |
13 | DB6 | Data bus |
14 | DB7 | Data bus |
15 | DB8 | Data bus (When select 8bits Mode, this pin is NC) |
16 | DB9 | Data bus (When select 8bits Mode, this pin is NC) |
17 | DB10 | Data bus (When select 8bits Mode, this pin is NC) |
18 | DB11 | Data bus (When select 8bits Mode, this pin is NC) |
19 | DB12 | Data bus (When select 8bits Mode, this pin is NC) |
20 | DB13 | Data bus (When select 8bits Mode, this pin is NC) |
21 | DB14 | Data bus (When select 8bits Mode, this pin is NC) |
22 | DB15 | Data bus (When select 8bits Mode, this pin is NC) |
23 | NC | No connect |
24 | NC | No connect |
25 | CS | Chip select |
26 | RESET | Hardware reset |
27 | L/R | Left / right selection; Default L/R=H |
28 | U/D | Up/down selection; ; Default U/D=L |
29 | NC | No connect |
30 | NC | No connect |
31 | NC | No connect |
32 | NC | No connect |
33 | VLED- | Power for LED Driver IC(GND) |
34 | VLED- | Power for LED Driver IC(GND) |
35 | VLED+ | Power for LED Driver IC(+5V) |
36 | VLED+ | Power for LED Driver IC(+5V) |
Allgemeine Spezifikationen
Artikel | Ausmaß | Einheit |
---|---|---|
Größe | 5,7 | Zoll |
Punktmatrix | 320 x RGB x 240(TFT) | Punkte |
Abmaße der modul | 141,12 x 101,55 x 13,5 | mm |
Aktiver Bereich | 115,2 x 86,4 | mm |
Punktabstand | 0,12 x 0,36 | mm |
LCD Typ | TFT, Weiß, Transmissiv | |
Betrachtungsrichtung | 12 o'clock | |
Grauskala-Umkehrrichtung | 6 o'clock | |
Seitenverhältnis | 4:3 | |
Hintergrundbeleuchtung Typ | LED, Weiß | |
Controller IC | SSD1963 | |
Schnittstelle | Digital 8080 family MPU 8bit/16bit | |
Touchscreen | ohne Touchscreen | |
Oberfläche | Glanz |
absolute Grenzwerte
Artikel | Symbol | Mindestwert | typischer Wert | Maximalwert | Einheit |
---|---|---|---|---|---|
Betriebstemperatur | TOP | -20 | - | +70 | ℃ |
Lagertemperatur | TST | -30 | - | +80 | ℃ |
elektrische Eigenschaften
1. Operating conditions: (CON3.Pin1=GND, Pin2=VDD)Artikel | Symbol | Mindestwert | typischer Wert | Maximalwert | Einheit |
---|---|---|---|---|---|
Supply Voltage For LCM | VDD | 3,0 | 3,1 | 3,3 | V |
Supply Current For LCM | IDD | - | 350 | 550 | mA |
2. Backlight driving conditions (CON3.Pin33,34=VLED-, Pin35,36=VLED+)
Parameter | Symbol | Min | Typ | Max | Unit |
---|---|---|---|---|---|
Operation Current For LED Driver | VLED=5V | - | 370 | 555 | V |
Power Consumption | VLED=5V | - | 1850 | 2775 | V |
Supply Voltage For LED Driver | VLED+ | - | 5 | - | V |
LED Life Time | - | - | 50,000 | - | mA |