首页 产品介绍 COG液晶模块 WO12864N

128x64 ST7567 COG LCM液晶显示模块

型号 WO12864N

►COG显示屏
►图形点阵
►分辨率:128x64
►IC: ST7567
►3V电源电压
►1/65 duty cycle
►接口:6800/8080/SPI

产品叙述

因应部分IC交期长, 华凌开发WO12864N作为WO12864B1替代选项型号。

规格图

128x64 ST7567 Chip on Glass LCD Module - WO12864N

产品规格

Pin功能定义

Pin 符号 说明
1 CSB Chip select input pin.Interface access is enabled when CSB is “L”,When CSB is non-active(CSB=”H”),D[7:0] pins are high impedance.
2 RSTB Hardware reset input pin. When RSTB is “L”, interna initialization is executed and the internal registers will be initialized.
3 A0 It determines whether the access is related to data or command. A0=“H” : Indicates that signals on D[7:0] are display data.
A0=“L” : Indicates that signals on D[7:0] are command
4 RWR Read/Write execution control pin. When PSB is “H”,
RWR is not used in serial interface and should fix to “H” by VDD1 or VDDH.
5 ERD Read/Write execution control pin. When PSB is “H”,
ERD is not used in serial interface and should fix to “H” by VDD1 or VDDH.
6 D0 When using 8-bit parallel interface: (6800 or 8080 mode)
8-bit bi-directional data bus. Connect to the data bus of 8-bit microprocessor. When CSB is non-active (CSB=“H”), D[7:0] pins are high impedance.
7 D1
8 D2
9 D3
10 D4
11 D5
12 D6
13 D7
14 VDD Power supply
15 Vss Ground
16-19 NC Not connect.
20 V0 V0 is the LCD driving voltage for common circuits at negative frame.
21 XV0 XV0 is the LCD driving voltage for common circuits at positive frame.
22 VG VG is the LCD driving voltage for segment circuits.
23-27 NC Not connect.
28 C86 C86 selects the microprocessor type in parallel interface mode.
29 PSB PSB selects the interface type: Serial or Parallel.
30 NC Not connect.

规格说明

项目 规格 单位
点阵(分辨率) 128 x 64
模块尺寸 89.7 x 49.8 x 6.0 mm
检视区域 69.0 x 36.5 mm
有效区域 63.97 x 31.97 mm
点大小 0.47 x 0.47 mm
点间距 0.5 x 0.5 mm
驱动方式 1/65 , 1/9 Bias
背光类型 LED
IC ST7567
接口 6800/8080/4线 SPI

最大绝对额定值

项目 符号 最小值 典型值 最大值 单位
工作温度 TOP -20 +70
储存温度 TST -30 +80
输入电压 VI -0.3 VDD+0.3 V
数字电源电压 VDD-Vss -0.3 3.6 V
LCD供电电压 V0-XV0 -0.3 16 V

电气特性

项目 符号 条件 最小值 典型值 最大值 单位
逻辑电源电压 VDD-VSS 2.8 3.0 3.2 V
LCD供电电压 VOP Ta=-20℃
Ta=25℃
Ta=70℃

9.3

9.5

9.7
V
V
V
输入高电压 VIH 0.7 VDD VDD V
输入低电压 VIL Vss 0.3VDD V
输出高电压 VOH 0.8 VDD VDD V
输出低电压 VOL Vss 0.2VDD V
供电电流 IDD VDD=3.0V 0.7 1.0 mA
 

Search Keyword: lcd 128x64, lcd 128 x 64, 128x64 lcd, 128 x 64 lcd

go top
close