Ana sayfa Ürünler TFT LCD Ekran Standart TFT LCD Modülü WF50DTYA3MNN0

5 inch MIPI DSI, IPS TFT LCD Ekran

Model No. WF50DTYA3MNN0

►Boyut : 5 inç
►Çözünürlük : 720×1280 dot
►Görünüm yönü : IPS
►Ara yüz : MIPI DSI
►Kontrolör dahil : Hayır
►Kontrol Kartı : Hayır
►Parlaklık(cd/m²): 300
►Delikli Çerçeve : Hayır
►Dokunmatik Ekran : dokunmatik Panel olmadan

ÇIZIM

Winstar 5 MIPI LCD Display, MIPI Interface LCD Panel (Wide Temperature) - WF50DTYA3MNN0

AYRINTILAR

Arayüz Pin Fonksiyonlari

Pin Sembol Fonksiyon
1 NC/TP_GND No connection 
2 NC/TP_SDA No connection
3 NC/TP_SCL No connection
4 NC/TP_INT No connection
5 NC/TP_RST No connection
6 NC/YU  No connection
7 NC/XL No connection
8 NC/YD  No connection
9 NC/XR No connection
10-11 VCI Power supply for analog circuits. Connect to an external power supply of 2.5V to 3.6V
12-13 NC No connection
14 RESET The external reset input
Initializes the chip with a low input. Be sure to execute a power-on reset after supplying power.
Fix to VDDI level when not in use.
15 TE  Tearing effect output pin.
Leave the pin open when not in use.
16 NC No connection
17-18 GND Power ground
19-20 IOVCC Power supply for analog circuits. Connect to an external power supply of 1.65V to 3.6V
21 GND Power ground
22 D3P MIPI DSI differential data pair. (Data lane 3)
23 D3N Leave it open or fix to LVDSVSS level when not in use.
24 GND Power ground
25 D2P MIPI DSI differential data pair. (Data lane 2)
26 D2N Leave it open or fix to LVDSVSS level when not in use.
27 GND Power ground
28 CLKP MIPI DSI differential clock pair
29 CLKN Leave it open or fix to LVDSVSS level when not in use.
30 GND Power ground
31 D1P MIPI DSI differential data pair. (Data lane 1)
32 D1N Leave it open or fix to LVDSVSS level when not in use.
33 GND Power ground
34 D0P MIPI DSI differential data pair. (Data lane 0)
35 D0N Leave it open or fix to LVDSVSS level when not in use.
36-37 GND Power ground
38 LED+ Power for LED backlight anode
39 LED1- Power for LED1 backlight cathode
40 LED2- Power for LED2 backlight cathode

Genel Özellikler

Kalem Dimension Birim
Boyut (Köşegen) 5.0 inç
Nokta Matrisi (Çözünürlük) 720× 3(RGB) ×1280 dots
Modül ölçüleri 66.10 (W) × 120.4 (H) ×1.85 mm
Aktif alan 62.1 (W) × 110.4 (H) mm
Nokta sıklığı 0.08625(W) ×0.08625(H) mm
LCD Tipi TFT, Siyah, İletici
Viewing angle 80/80/80/80
Görünüm Oranı 16:9
Backlight Tipi LED, Beyaz
Dokunmatik Panel dokunmatik Panel olmadan
Yüzey Reflets

Maksimum Değerler

Kalem Sembol Minumum Deger Tipik Deger Maksimum Deger Birim
Çalışma Sıcaklığı TOP -20 +70
Saklama Sıcaklığı TST -30 +80

Elektronik Özellikleri

Kalem Sembol Standart Deger Birim
Minumum Deger Tipik Deger Maksimum Deger
Power supply for analog circuit VCI 2.5 3.3 3.6 V
Power supply for logic circuit IOVCC 1.65 1.8 3.6 V
Current for Driver IDD - 44   mA
go top
close