Ana sayfa Ürünler TFT LCD Ekran IPS LCD Ekran WF50FTWAGLNN0

5" 800×480 Geniş Sıcaklık IPS TFT Ekran

Model No. WF50FTWAGLNN0

►Boyut : 5 inç
►Çözünürlük : 800x480 dot
►Görünüm yönü : IPS
►Ara yüz : LVDS
►TFT Sürücü Entegresi : ST7262
►Kontrol Kartı : Hayır
►Parlaklık (cd/m²) : 500
►Delikli Çerçeve : Hayır
►Dokunmatik Ekran : dokunmatik Panel olmadan (ekran)
►Çalışma Sıcaklığı : -30~+80°C

ÇIZIM

5" 800×480 Wide Temperature IPS TFT LCD - WF50FTWAGLNN0

AYRINTILAR

Arayüz Pin Fonksiyonlari

Pin Sembol Fonksiyon
1 NC No connection
2 VCC Power voltage
3 VCCI Power supply for digital I/O pins.
4 NC No connection
5 GRB Global reset pin. When GRB is “L”, internal initialization procedure is executed
6 DISP Display on/off
7 GND Power Ground
8 RXIN0- LVDS input lane: RX0-/ RX0+
9 RXIN0+
10 GND Power Ground
11 RXIN1- LVDS input lane: RX1-/ RX1+
12 RXIN1+
13 GND Power Ground
14 RXIN2- LVDS input lane: RX2-/ RX2+
15 RXIN2+
16 GND Power Ground
17 RXCLKIN- LVDS input lane, detail pin define please refer to LVDS
Input Pin Mapping Table.
18 RXCLKIN+
19 GND Power Ground
20 RXIN3- LVDS input lane: RX3-/ RX3+
21 RXIN3+
22 GND Power Ground
23-24 NC No connection
25 FMT LVDS_FMT sets LVDS data format.
LVDS_FMT Function Description
L VESA Mode (Default)
H JEIDA Mode
LVDS_FMT is not used in RGB interface and should be connected to “L”.
26-27 NC No connection
28 SELB SELB sets VSYNC polarity in RGB interface and sets LVDS 3- / 4- lane in LVDS interface.
MCU Type VDPOL Function Description
RGB interface L VSYNC polarity: positive
H VSYNC polarity: positive: negative (Default)
LVDS inteface L LVD 3 lane
H LVD 4 lane (Default)
29 NC No connection
30 GND Power Ground
31-32 VLED- Power for LED backlight (Cathode)
33 L/R Horizontal scan direction control pin. This pin must be connected to “H” or “L” according to system application
HDIR Function Description
L From right to left
H From left to right (Default)
34 U/D Vertical scan direction control pin. This pin must be connected to “H” or “L” according to system application.
VDIR Function Description
L From down to up.
H From up to down.(Default)
35 NC No connection
36-37 GND Power Ground
38 NC No connection
39-40 VLED+ Power for LED backlight (Anode)

Genel Özellikler

Kalem Ölçü Birim
Boyut (Köşegen) 5.0 inç
Nokta Matrisi (Çözünürlük) 800× 3(RGB) × 480 dots
Modül ölçüleri 120.7(W) ×75.8(H) ×2.8mm mm
Aktif alan 108(W) ×64.8 (H) mm mm
Nokta sıklığı 0.135(W) ×0.135(H) mm mm
LCD Tipi TFT, Siyah, İletici
Görünüm yönü 80/80/80/80
Görünüm Oranı 5:3
TFT Sürücü Entegresi ST7262 veya eşdeğer
TFT Arayüz LVDS
Backlight Tipi LED, Beyaz
Dokunmatik Panel Dokunmatik Panel olmadan
Yüzey Anti-parlama

Maksimum Değerler

Kalem Sembol Minumum Deger Tipik Deger Maksimum Deger Birim
Çalışma Sıcaklığı TOP -30 +80
Saklama Sıcaklığı TST -30 +80

Elektronik Özellikleri

Typical Operation Conditions

Kalem Sembol Standart Deger Birim
Minumum Deger Tipik Deger Maksimum Deger
Power voltage VCC 3.1 3.3 3.6 V
Power voltage VCCI 3.1 3.3 3.6 V
Current for Driver(Black) ICC - 67.6 102 mA

 

go top
close