Ana sayfa Ürünler OLED Ekran Grafik OLED Ekran WEO012864J-CTP

12864, 2.42 inç Kapasitif Dokunmatik Panel OLED Ekran

Model No. WEO012864J-CTP

►Türü : Grafik
►Yapı : COG
►Boyut : 2.42 inç
►128 x 64 dot matrisi
►Kontrolör dahil SSD1309
►3V güç sağlayıcı
►1/64 görev
►Ara yüz : 8080 seçenek 6800, SPI, I2C
►Kapasitif dokunmatik panelle birlikte
►OLED Rengi: Beyaz / Sarı / Gök Mavisi / Yeşil

ÇIZIM

12864, 2.42 inch OLED Display Module with Capacitive Touch Panel - WEO012864J-CTP

Data source ref: WEO012864JWPP3D00000

AYRINTILAR

Arayüz Pin Fonksiyonlari

No. Sembol Fonksiyon
1 VDD Power supply pin for core logic operation
2 VSS Ground.
3 NC(GND) No connection
4~11 D0~D7 These pins are bi-directional data bus connecting to the MCU data bus.
Unused pins are recommended to tie LOW.
12 CS# This pin is the chip select input connecting to the MCU.
The chip is enabled for MCU communication only when CS# is pulled LOW (active LOW).
13 NC(GND) No connection
14 RES# This pin is reset signal input.
When the pin is pulled LOW, initialization of the chip is executed.
Keep this pin pull HIGH during normal operation.
15 R/W# This pin is read / write control input pin connecting to the MCU interface.
When 6800 interface mode is selected, this pin will be used as Read/Write (R/W#) selection input. Read mode will be carried out when this pin is pulled HIGH and write mode when LOW.
16 D/C# This pin is Data/Command control pin connecting to the MCU.
When the pin is pulled HIGH, the data at D[7:0] will be interpreted as data.
When the pin is pulled LOW, the data at D[7:0] will be transferred to a command register.
17 E This pin is MCU interface input.
When 6800 interface mode is selected, this pin will be used as the Enable (E) signal.
18 NC(GND) No connection
19 DISP No Connection
20 NC(GND) No connection
21 TP_INT Interrupt signal, active low, asserted to request
Host start a new transaction
22 TP_SDA I2C data signal
23 TP_SCL I2C clock signal
24 TP_RST External reset signal, active low

Mekanik Veri

Kalem Ölçü Birim
Nokta Matrisi 128 x 64
Modül ölçüleri 75.0 × 52.7 ×10.2 MAX mm
Aktif alan 55.01 × 27.49 mm
Nokta boyutu 0.40 × 0.40 mm
Nokta sıklığı 0.43 × 0.43 mm
Display Mode Pasif Matrisli
Display Color Monokrom
Drive Duty 1/64 Duty
IC SSD1309
Arayüz 8Bits 6800 , Opsiyonel 8080 / 4-SPI / I2C
Boyut 2.42 inç
PCAP IC GT911
Detect Point 1
PCAP Arayüz I2C
Yüzey Parlama

Maksimum Değerler

Parameter Sembol Minumum Deger Maksimum Deger Birim
Supply Voltage for Logic VDD -0.3 4 V
Çalışma Sıcaklığı TOP -20 +70 °C
Saklama Sıcaklığı TSTG -30 +80 °C

Elektronik Özellikleri

DC EElektronik Özellikleri

Kalem Sembol Durum Minumum Deger Tipik Deger Maksimum Deger Birim
Supply Voltage for Logic VDD 2.8 3.0 3.3 V
High Level Input VIH 0.8×VDD V
Low Level Input VIL 0.2×VDD V
High Level Output VOH 0.9×VDD V
Low Level Output VOL 0.1×VDD V
50% Check Board operating Current IDD VDD =3V - 150 300 mA

Search keyword: 128x64 oled, oled 128x64, 2.42 oled, 2.42" oled, 2.42 inç oled, oled 2.42, oled 2.42"

go top
close