Ana sayfa Ürünler OLED Ekran Grafik OLED Ekran WEA009664B

1.1 inç, 96x64 COG+PCB Grafik OLED Ekran

Model No. WEA009664B

►Türü : Grafik
►Yapı : COG+PCB
►Boyut : 1.1 inç
►96×64 dot matrisi
►Kontrolör dahil SSD1327
►3V güç sağlayıcı
►1/64 görev
►Ara yüz : SPI, I2C
►OLED Rengi: Sarı

ÇIZIM

96x64 OLED Display,1.1 OLED - WEA009664B - Winstar Display

AYRINTILAR

Arayüz Pin Fonksiyonlari

No. Sembol Fonksiyon
1 SDA When serial interface mode is selected, D0 will be the serial clock input: SCLK; D1 will be the serial data input: SDIN.
When I2C mode is selected, D2, D1 should be tied together and serve as SDAout, SDAin in application and D0 is the serial clock input, SCL.
2 SCL
3 SA0 In I2C mode, this pin acts as SA0 for slave address selection.
When 3-wire serial interface is selected, this pin must be connected to VSS.
4 RST This pin is reset signal input. When the pin is pulled LOW, initialization of the chip is executed.
Keep this pin HIGH (i.e. connect to VDD) during normal operation.
5 CS This pin is the chip select input. (active LOW).
6 VDD 3.0V Power supply pin for core logic operation.
7 VIN 5.0V Power supply pin for core logic operation.
8 GND This is a ground pin.

Mekanik Veri

Kalem Ölçü Birim
Nokta Matrisi 96 × 64 Dots
Modül ölçüleri 31.5 × 31.5 × 2.72 mm
Aktif alan 22.53 × 15.01 mm
Nokta boyutu 0.205 × 0.205 mm
Nokta sıklığı 0.235 × 0.235 mm
Display Mode Pasif Matrisli
Display Color Monokrom
Gray scale 4 bits
Drive Duty 1/64 Duty
IC SSD1327
Arayüz SPI ,Optional I2C
Boyut 1.1 inç

Elektronik Özellikleri

Kalem Sembol Durum Minumum Deger Tipik Deger Maksimum Deger Birim
Supply Voltage for Logic VDD 2.8 3.0 3.2 V
Supply Voltage for Logic VIN 4.8 5.0 5.2 V
Supply Voltage for Display VCC 7.5 8.0 8.5 V
Input High Volt. VIH 0.8×VDD VDDIO V
Input Low Volt. VIL 0 0.2×VDD V
Output High Volt. VOH 0.9×VDD VDDIO V
Output Low Volt. VOL 0 0.1×VDD V
50% Check Board operating Current IDD VDD=3.0V 55 100 mA

Maksimum Değerler

Parameter Sembol Minumum Deger Maksimum Deger Birim
Supply Voltage for Logic VDD 1.65 3.30 V
Supply Voltage for Logic VIN 4.0 6.0 V
Supply Voltage for Display VCC 0 16.0 V
Çalışma Sıcaklığı TOP -40 80 °C
Saklama Sıcaklığı TSTG -40 85 °C
go top
close