128x64 COG LCD Ekran (ST7565P)
Model No. WO12864T
►COG Ekran 128x64
►Grafik LCD
►IC: ST7565P
►3.3V güç sağlayıcı
►1/65 görev döngüsü, 1/9 bias
►Ara yüz : 6800/8080/SPI
Açıklama
ÇIZIM
AYRINTILAR
Arayüz Pin Fonksiyonlari
Pin No. | Sembol | I/O | TANIM | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
1 | VDD | _ | Power supply pin for logic. | ||||||||||||
2 | VSS | _ | Ground pin, connected to 0V | ||||||||||||
3 | /CS1 | I | Chip select input pin. Interface access is enabled when CS1B is "L" and CB2 is "H". When chip is on-active (CS1B="H" or CS2="L"), D[7:0] pins are high impedance. | ||||||||||||
4 | CS2 | ||||||||||||||
5 | /RES | I | Hardware reset input pin. When RSTB is "L", internal initialization is executed and the internal registers will be initialized. | ||||||||||||
6 | A0 | I | It determines whether the access is related to data or command. A0="H": Indicates that signals on D[7:0] are display data. A0="L": Indicates that signals on D[7:0] are command. |
||||||||||||
7 | R/W | I | Read/Write execution control pin. When PSB is "H", RWR is not used in serial interface and should fix to "H" by VDD.
|
||||||||||||
8 | E | I | Read/Write execution control pin. When PSB is "H",
ERD is not used in serial interface and should fix to "H" by VDD. |
||||||||||||
9-16 | D0-D7 | I/O | Data bus line | ||||||||||||
17 | C86 | I | C86 selects the microprocessor type in parallel interface mode.
Please refer to "APPLICATION NOTES" and "Microprocessor Interface" (Section 6) for detailed connection of the selected interface. |
||||||||||||
18 | P/S | I | PSB selects the interface type: Serial or Parallel. |
Genel Özellikler
Kalem | Ölçü | Birim |
---|---|---|
Nokta Matrisi (Çözünürlük) | 128 × 64 | - |
Modül ölçüleri | 38.0 × 26.42 × 8.8 | mm |
Görüntüleme alanı | 29.58 × 16.22 | mm |
Aktif alan | 25.58 × 14.06 | mm |
Nokta boyutu | 0.18 × 0.20 | mm |
Nokta sıklığı | 0.20 × 0.22 | mm |
Duty | 1/65 DUTY,1/9 BIAS | |
Backlight Tipi | LED | |
IC | ST7565P |
Maksimum Değerler
Kalem | Sembol | Minumum Deger | Tipik Deger | Maksimum Deger | Birim |
---|---|---|---|---|---|
Çalışma Sıcaklığı | TOP | -20 | - | +70 | ℃ |
Saklama Sıcaklığı | TST | -30 | - | +80 | ℃ |
Power Supply Voltage | VDD | -0.3 | - | 3.6 | V |
Power supply voltage (VDD standard) | V0, VOUT | -0.3 | - | 14.5 | V |
Power supply voltage (VDD standard) | V1, V2, V3, V4 | -0.3 | - | V0+0.3 | V |
Elektronik Özellikleri
Kalem | Sembol | Durum | Minumum Deger | Tipik Deger | Maksimum Deger | Birim |
---|---|---|---|---|---|---|
Supply Voltage For Logic | VDD-VSS | - | 3.0 | - | 3.3 | V |
Supply Voltage For LCD | VOP | Ta=-20℃ Ta=25℃ Ta=70℃ |
- 8.9 - |
- 9.1 - |
- 9.3 - |
V V V |
Input High Volt. | VIH | - | 0.8 VDD | - | VDD | V |
Input Low Volt. | VIL | - | Vss | - | 0.2 VDD | V |
Output High Volt. | VOH | - | 0.8 VDD | - | VDD | V |
Output Low Volt. | VOL | - | Vss | - | 0.2 VDD | V |
Supply Current | IDD | VDD=3.3V | - | - | 2.0 | mA |
Search Keyword: lcd 128x64, lcd 128 x 64, 128x64 lcd, 128 x 64 lcd