Ana sayfa Ürünler COG LCD Ekran WO12864L

128x64 COG LCD Modülü (ST7567A IC)

Model No. WO12864L

►COG Ekran 128x64
►Grafik LCD
►IC: ST7567A
►3V güç sağlayıcı
►1/65 görev döngüsü, 1/9 bias
►Ara yüz : SPI / I2C

Açıklama

Below is the comparison of circuit designs of WO12864L and WO12864A1. For new designs, WO12864L is a bettter choice.

WO12864L-TFH# WO12864A1-TFH#
WO12864L-TFH Pin WO12864A1-TFH Pin

ÇIZIM

128x64 COG Graphic STN LCD Display (ST7567A IC) - WO12864L


Data source ref: WO12864L-TFH#

AYRINTILAR

Arayüz Pin Fonksiyonlari

Pin No. Sembol TANIM
1 ESD ESD
2 SI2 SI2 selects the interface type: I2C serial interface or not
SI2 Selected Interface
"L" Serial 4-Line SPI Interface
"H" I2C Serial Interface
3 VG VG is the LCD driving voltage for segment circuits
4 XV0 XV0 is the LCD driving voltage for common circuits at positive frame.
5 V0 V0 is the LCD driving voltage for common circuits at negative frame.
6 VSS GROUND
7 VDD POWER
8 SDA D[1:3] must be connected together as SDA.
D[4:7]=(1,1,1,1): ID Pin. D[4:7] should fix to “H” or “L” by VDDH or
VSSL.
9 SCL
10 A0 It determines whether the access is related to data or command.
A0=“H” : Indicates that signals on D[7:0] are display data.
A0=“L” : Indicates that signals on D[7:0] are command.
11 RSTB Hardware reset input pin. When RSTB is “L”, internal initialization is executed and the internal registers will be initialized.
12 CSB Chip select input pin. Interface access is enabled when CSB is “L”.
When CSB is non-active (CSB=“H”), D[7:0] pins are high impedance.
13 ESD ESD

Genel Özellikler

Kalem Ölçü Birim
Nokta Matrisi (Çözünürlük) 128 x 64
Modül ölçüleri 60.10 x 44.50 x 5.01(Max) mm
Görüntüleme alanı 54.6 x 32.0 mm
Aktif alan 49.89 x 27.49 mm
Nokta boyutu 0.36 x 0.40 mm
Nokta sıklığı 0.39 x 0.43 mm
Duty 1/65 DUTY, 1/9BIAS
Backlight Tipi LED
IC ST7567A (SPI & I2C)

Maksimum Değerler

Kalem Sembol Minumum Deger Tipik Deger Maksimum Deger Birim
Çalışma Sıcaklığı TOP -20 +70
Saklama Sıcaklığı TST -30 +80
Input Voltage VI -0.3 VDD+0.3 V
Digital Power Supply Voltage VDD-Vss -0.3 4.0 V
LCD Power supply voltage V0-XV0 -0.3 18.0 V

Elektronik Özellikleri

Kalem Sembol Durum Minumum Deger Tipik Deger Maksimum Deger Birim
Supply Voltage For Logic VDD-VSS 2.9 3.0 3.1 V
Supply Voltage For LCD VOP Ta=-20℃
Ta=25℃
Ta=70℃

9.3

9.5

9.7
V
V
V
Input High Volt. VIH 0.7VDD VDD V
Input Low Volt. VIL VSS 0.3VDD V
Supply Current IDD     2.0 mA

Search Keyword: lcd 128x64, lcd display 128x64, 128x64 lcd display
go top
close